Production of polymer nanofibers containing hydroxyapatite by electrospinning

Mihály Tóth, Gréta Gergely, István Endre Lukács, Ferenc Wéber, Attila Lajos Tóth, Levente Illés, Csaba Balázsi

Research output: Conference contribution

2 Citations (Scopus)

Abstract

Hydroxyapatite (HAP) is the main inorganic component of mammal bone and teeth. It is one of the few bioactive materials, which helps cell growing. The objective of this study was to fabricate hydroxyapatite-biopolimer nanofiber mats. To achieve this goal, two different suspensions were used. Approximately 1 μm diameter size fibers with large HAP agglomerates were fabricated using acetone and acetic acid. Fibers with a larger diameter size and homogenous distributed HAP particles were produced applying acetone and isopropanol. During the experiment the effect of the processing parameters: applied voltage, diameter of needle, the distance of the needle tip and the collector, flow rate was analyzed.

Original languageEnglish
Title of host publicationMaterials Science, Testing and Informatics V
Pages257-262
Number of pages6
DOIs
Publication statusPublished - dec. 15 2010
Event7th Hungarian Conference on Materials Science - Balatonkenese, Hungary
Duration: okt. 11 2009okt. 13 2009

Publication series

NameMaterials Science Forum
Volume659
ISSN (Print)0255-5476

Other

Other7th Hungarian Conference on Materials Science
CountryHungary
CityBalatonkenese
Period10/11/0910/13/09

    Fingerprint

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Tóth, M., Gergely, G., Lukács, I. E., Wéber, F., Tóth, A. L., Illés, L., & Balázsi, C. (2010). Production of polymer nanofibers containing hydroxyapatite by electrospinning. In Materials Science, Testing and Informatics V (pp. 257-262). (Materials Science Forum; Vol. 659). https://doi.org/10.4028/www.scientific.net/MSF.659.257