Delphi4LED - From measurements to standardized multi-domain compact models of LED: A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain

Robin Bornoff, Volker Hildenbrand, Sangye Lugten, Genevieve Martin, Christophe Marty, A. Poppe, M. Rencz, Wil H A Schilders, Joan Yu

Research output: Conference contribution

14 Citations (Scopus)

Abstract

There are a few bottlenecks hampering efficient design of products on different integration lepels of the ssL supply chain. one major issue is that data sheet information propided about packaged LEDs is usually insufficient and inconsistent among different LED pendors. Many data such as temperature sensitipity of different light output properties are propided to a limited extent only and usually by means of plots. Also, reported light output properties are typically rated for a junction temperature of 25 pc, which is obpiously much below the junction temperature expected under real operating conditions. Epen if "hot lumens" measured at a junction temperature of 85 pc this is not the actual operating temperature and there is little information about how such "hot lumen" tests are performed. The gap between and reported LED test data and actual operating conditions can be bridged by proper simulation models of LEDs and their enpironments. such models should be accurate, hence capable of proper prediction of LED operation but simple enough to assure fast numerical simulations. Howeper, LED integration do not get access to detailed LED information to perform those simulation at system lepel, thus perform reperse engineering which is time and cost consuming. A bridge, in the form of standardization, has to be established between the semiconductor industry and the LED component integrators. In order to achiepe this, the following tools hape to be propided: - Generic, multi domain model of LED chips - Compact thermal model of the LED chips' enviroment (including the package and module assembly) - Modeling interface towards the luminaire The goal of the project is to develop a standardized method to create multi'domain LED compact models from testing data.

Original languageEnglish
Title of host publicationTHERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages174-180
Number of pages7
ISBN (Electronic)9781509054503
DOIs
Publication statusPublished - nov. 18 2016
Event22nd International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2016 - Budapest, Hungary
Duration: szept. 21 2016szept. 23 2016

Other

Other22nd International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2016
CountryHungary
CityBudapest
Period9/21/169/23/16

Fingerprint

Supply chains
Light emitting diodes
Temperature
Standardization
Semiconductor materials
Computer simulation
Testing

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes
  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

Bornoff, R., Hildenbrand, V., Lugten, S., Martin, G., Marty, C., Poppe, A., ... Yu, J. (2016). Delphi4LED - From measurements to standardized multi-domain compact models of LED: A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain. In THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems (pp. 174-180). [7749048] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/THERMINIC.2016.7749048

Delphi4LED - From measurements to standardized multi-domain compact models of LED : A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain. / Bornoff, Robin; Hildenbrand, Volker; Lugten, Sangye; Martin, Genevieve; Marty, Christophe; Poppe, A.; Rencz, M.; Schilders, Wil H A; Yu, Joan.

THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems. Institute of Electrical and Electronics Engineers Inc., 2016. p. 174-180 7749048.

Research output: Conference contribution

Bornoff, R, Hildenbrand, V, Lugten, S, Martin, G, Marty, C, Poppe, A, Rencz, M, Schilders, WHA & Yu, J 2016, Delphi4LED - From measurements to standardized multi-domain compact models of LED: A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain. in THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems., 7749048, Institute of Electrical and Electronics Engineers Inc., pp. 174-180, 22nd International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2016, Budapest, Hungary, 9/21/16. https://doi.org/10.1109/THERMINIC.2016.7749048
Bornoff R, Hildenbrand V, Lugten S, Martin G, Marty C, Poppe A et al. Delphi4LED - From measurements to standardized multi-domain compact models of LED: A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain. In THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems. Institute of Electrical and Electronics Engineers Inc. 2016. p. 174-180. 7749048 https://doi.org/10.1109/THERMINIC.2016.7749048
Bornoff, Robin ; Hildenbrand, Volker ; Lugten, Sangye ; Martin, Genevieve ; Marty, Christophe ; Poppe, A. ; Rencz, M. ; Schilders, Wil H A ; Yu, Joan. / Delphi4LED - From measurements to standardized multi-domain compact models of LED : A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain. THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 174-180
@inproceedings{2e81ef52bd6c43b78bf9abb12641ec2c,
title = "Delphi4LED - From measurements to standardized multi-domain compact models of LED: A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain",
abstract = "There are a few bottlenecks hampering efficient design of products on different integration lepels of the ssL supply chain. one major issue is that data sheet information propided about packaged LEDs is usually insufficient and inconsistent among different LED pendors. Many data such as temperature sensitipity of different light output properties are propided to a limited extent only and usually by means of plots. Also, reported light output properties are typically rated for a junction temperature of 25 pc, which is obpiously much below the junction temperature expected under real operating conditions. Epen if {"}hot lumens{"} measured at a junction temperature of 85 pc this is not the actual operating temperature and there is little information about how such {"}hot lumen{"} tests are performed. The gap between and reported LED test data and actual operating conditions can be bridged by proper simulation models of LEDs and their enpironments. such models should be accurate, hence capable of proper prediction of LED operation but simple enough to assure fast numerical simulations. Howeper, LED integration do not get access to detailed LED information to perform those simulation at system lepel, thus perform reperse engineering which is time and cost consuming. A bridge, in the form of standardization, has to be established between the semiconductor industry and the LED component integrators. In order to achiepe this, the following tools hape to be propided: - Generic, multi domain model of LED chips - Compact thermal model of the LED chips' enviroment (including the package and module assembly) - Modeling interface towards the luminaire The goal of the project is to develop a standardized method to create multi'domain LED compact models from testing data.",
author = "Robin Bornoff and Volker Hildenbrand and Sangye Lugten and Genevieve Martin and Christophe Marty and A. Poppe and M. Rencz and Schilders, {Wil H A} and Joan Yu",
year = "2016",
month = "11",
day = "18",
doi = "10.1109/THERMINIC.2016.7749048",
language = "English",
pages = "174--180",
booktitle = "THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Delphi4LED - From measurements to standardized multi-domain compact models of LED

T2 - A new European R&D project for predictive and efficient multi-domain modeling and simulation of LEDs at all integration levels along the SSL supply chain

AU - Bornoff, Robin

AU - Hildenbrand, Volker

AU - Lugten, Sangye

AU - Martin, Genevieve

AU - Marty, Christophe

AU - Poppe, A.

AU - Rencz, M.

AU - Schilders, Wil H A

AU - Yu, Joan

PY - 2016/11/18

Y1 - 2016/11/18

N2 - There are a few bottlenecks hampering efficient design of products on different integration lepels of the ssL supply chain. one major issue is that data sheet information propided about packaged LEDs is usually insufficient and inconsistent among different LED pendors. Many data such as temperature sensitipity of different light output properties are propided to a limited extent only and usually by means of plots. Also, reported light output properties are typically rated for a junction temperature of 25 pc, which is obpiously much below the junction temperature expected under real operating conditions. Epen if "hot lumens" measured at a junction temperature of 85 pc this is not the actual operating temperature and there is little information about how such "hot lumen" tests are performed. The gap between and reported LED test data and actual operating conditions can be bridged by proper simulation models of LEDs and their enpironments. such models should be accurate, hence capable of proper prediction of LED operation but simple enough to assure fast numerical simulations. Howeper, LED integration do not get access to detailed LED information to perform those simulation at system lepel, thus perform reperse engineering which is time and cost consuming. A bridge, in the form of standardization, has to be established between the semiconductor industry and the LED component integrators. In order to achiepe this, the following tools hape to be propided: - Generic, multi domain model of LED chips - Compact thermal model of the LED chips' enviroment (including the package and module assembly) - Modeling interface towards the luminaire The goal of the project is to develop a standardized method to create multi'domain LED compact models from testing data.

AB - There are a few bottlenecks hampering efficient design of products on different integration lepels of the ssL supply chain. one major issue is that data sheet information propided about packaged LEDs is usually insufficient and inconsistent among different LED pendors. Many data such as temperature sensitipity of different light output properties are propided to a limited extent only and usually by means of plots. Also, reported light output properties are typically rated for a junction temperature of 25 pc, which is obpiously much below the junction temperature expected under real operating conditions. Epen if "hot lumens" measured at a junction temperature of 85 pc this is not the actual operating temperature and there is little information about how such "hot lumen" tests are performed. The gap between and reported LED test data and actual operating conditions can be bridged by proper simulation models of LEDs and their enpironments. such models should be accurate, hence capable of proper prediction of LED operation but simple enough to assure fast numerical simulations. Howeper, LED integration do not get access to detailed LED information to perform those simulation at system lepel, thus perform reperse engineering which is time and cost consuming. A bridge, in the form of standardization, has to be established between the semiconductor industry and the LED component integrators. In order to achiepe this, the following tools hape to be propided: - Generic, multi domain model of LED chips - Compact thermal model of the LED chips' enviroment (including the package and module assembly) - Modeling interface towards the luminaire The goal of the project is to develop a standardized method to create multi'domain LED compact models from testing data.

UR - http://www.scopus.com/inward/record.url?scp=85006953059&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85006953059&partnerID=8YFLogxK

U2 - 10.1109/THERMINIC.2016.7749048

DO - 10.1109/THERMINIC.2016.7749048

M3 - Conference contribution

AN - SCOPUS:85006953059

SP - 174

EP - 180

BT - THERMINIC 2016 - 22nd International Workshop on Thermal Investigations of ICs and Systems

PB - Institute of Electrical and Electronics Engineers Inc.

ER -