Miskolci Egyetem

Research Output 1985 2019

Filter
Chapter
2019

Analysis of material removal efficiency in face milling of aluminum alloy

Kundrák, J., Molnár, V., Makkai, T. & Dági, T., jan. 1 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 393-404 12 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter

Milling (machining)
Aluminum alloys
Machining
Diamond
Diamonds

The examination of cutting force as function of depth of cut in cases with constant and changing chip cross section

Kundrák, J., Markopoulos, A. P., Karkalos, N. E. & Makkai, T., jan. 1 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 405-415 11 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter

Milling (machining)
Steel
Machining
Experiments
2018

Analysis of machining time and material removal performance as factors influencing efficiency and profitability

Kundrák, J., Molnar, V. & Deszpoth, I., jan. 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 268-279 12 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter

Profitability
Machining
Surface properties
Automotive industry
Abrasives

Correlation between process parameters and cutting forces in the face milling of steel

Kundrák, J., Markopoulos, A. P., Makkai, T. & Karkalos, N. E., jan. 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 255-267 13 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter

Milling (machining)
Steel
Design of experiments
Surface properties
Statistical methods
2 Citations (Scopus)

Investigation of the topography of face milled surfaces

Kundrák, J. & Felhő, C., jan. 1 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 78-83 6 p. (Materials Science Forum; vol. 919).

Research output: Chapter

Topography
topography
Surface roughness
Surface topography
roughness
2 Citations (Scopus)

Preliminary investigations for the effect of cutting tool edge geometry in high-feed face milling

Karpuschewski, B., Kundrák, J., Felhő, C., Varga, G., Sztankovics, I., Makkai, T. & Borysenko, D., jan. 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 241-254 14 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter

Milling (machining)
Cutting tools
Geometry
Machining
Seats
2014
2 Citations (Scopus)

Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel

Kundrák, J., Ráczkövi, L. & Gyáni, K., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 474. p. 333-338 6 p. (Applied Mechanics and Materials; vol. 474).

Research output: Chapter

Bearings (structural)
Cutting tools
Machining
Wear of materials
Steel

Numerical research on the changing of the slip-line field in hard turning of case hardened steels

Szabó, G. & Kundrák, J., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 474. p. 399-404 6 p. (Applied Mechanics and Materials; vol. 474).

Research output: Chapter

Steel
Finite element method
Computer simulation

Some characteristic parameters of the run-in phase in rotational turning and their determination

Sztankovics, I. & Kundrák, J., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 474. p. 405-410 6 p. (Applied Mechanics and Materials; vol. 474).

Research output: Chapter

Kinematics
Geometry
2013
2 Citations (Scopus)

A unified theoretical framework to model bulk, surface and interfacial thermodynamic properties of immiscible liquid alloys

Vegh, A., Mekler, C. & Kaptay, G., 2013, Materials Science Forum. Trans Tech Publications Ltd, Vol. 752. p. 10-19 10 p. (Materials Science Forum; vol. 752).

Research output: Chapter

liquid alloys
Thermodynamic properties
thermodynamic properties
Thermodynamics
thermodynamics
24 Citations (Scopus)

Effect of environmentally conscious machining on machined surface quality

Varga, G. & Kundrák, J., 2013, Applied Mechanics and Materials. Vol. 309. p. 35-42 8 p. (Applied Mechanics and Materials; vol. 309).

Research output: Chapter

Surface properties
Machining
Cooling
Cutting tools
Cost reduction
12 Citations (Scopus)

Some aspects of the hard machining of bore holes

Kundrák, J., Varga, G., Deszpoth, I. & Molnar, V., 2013, Applied Mechanics and Materials. Vol. 309. p. 126-132 7 p. (Applied Mechanics and Materials; vol. 309).

Research output: Chapter

Machining
Hardness
Wear of materials
Economics
Experiments
1 Citation (Scopus)

The effect of micro-impulse current on the morphology of tin electrodeposited from chloride solutions

Kulcsár, T., Dobó, Z. & Kékesi, T., 2013, Materials Science Forum. Trans Tech Publications Ltd, Vol. 752. p. 294-303 10 p. (Materials Science Forum; vol. 752).

Research output: Chapter

Tin
impulses
tin
Cathodes
chlorides
14 Citations (Scopus)

Theoretical value of total height of profile in rotational turning

Sztankovics, I. & Kundrák, J., 2013, Applied Mechanics and Materials. Vol. 309. p. 154-161 8 p. (Applied Mechanics and Materials; vol. 309).

Research output: Chapter

Surface roughness
Cutting tools
Kinematics
Geometry
2012
5 Citations (Scopus)

Particle Stabilized Foams

Kaptay, G. & Babcsán, N., jan. 8 2012, Foam Engineering: Fundamentals and Applications. John Wiley and Sons, p. 121-143 23 p.

Research output: Chapter

Foams
2010
4 Citations (Scopus)

Stabilization of dispersed systems (in particular nanoparticles) by polymers

Bárány, S. & Dékány, I., jan. 1 2010, Nanoscience: Colloidal and Interfacial Aspects. CRC Press, p. 1017-1046 30 p.

Research output: Chapter

Polymers
Stabilization
Nanoparticles
Dispersions
Adsorption
2000
2 Citations (Scopus)

Equilibria in the ternary Fe-Al-N system

Yaghmaee, M. S., Kaptay, G. & Jánosfy, G., 2000, Materials Science Forum. Trans Tech Publ, Vol. 329. p. 519-524 6 p.

Research output: Chapter

Solubility
Aluminum
Liquids
Iron
Gases
7 Citations (Scopus)

Interfacial criteria to avoid pushing of particles during solidification of metal matrix composites

Kaptay, G., 2000, Materials Science Forum. Trans Tech Publ, Vol. 329. p. 121-126 6 p.

Research output: Chapter

Solidification
Metals
Composite materials
Interfacial energy
Liquid metals
41 Citations (Scopus)

Interfacial forces and energies relevant to production of metal matrix composites

Kaptay, G., Báder, E. & Bolyán, L., 2000, Materials Science Forum. Trans Tech Publ, Vol. 329. p. 151-156 6 p.

Research output: Chapter

Interfacial energy
Metals
Liquid metals
Composite materials
Cermets