Wear Measurements by Means of Radioactive Ion Implantation

L. Gialanella, G. Imbriani, V. Roca, M. Romano, N. De Cesare, A. D'Onofrio, F. Terrasi, H. W. Becker, D. Rogalla, A. Stephan, F. Strieder, Zs. S. Fülöp, G. Gyürky, E. Somorjai, M. Russo, D. Daliento, N. Sanseverino

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Radioactive ion implantation allows non-contacting, online wear measurements with sub micrometric sensitivity to be performed, by monitoring the removed and/or residual activity on parts subject to wear. Comparative studies of different materials, including those who exhibit a low resistance to radiation damage, can be easily performed by means of this technique. A project has started at the TTT3 tandem of the University "Federico II" in Naples, Italy, in order to exploit such technique using a 7Be ion beam, that was developed to study the astrophysical important reaction 7Be(p,γ)8B. The 7Be ion beam is produced using a ion sputter source and accelerated to an energy up to 8.0 MeV. A novel setup allows control of the implanted ion depth distribution, and is a crucial point for the application of this technique. The 7Be ion beam production and implantation procedures are discussed. Finally, the results of some test measurements are presented.

Original languageEnglish
Title of host publicationApplication of Accelerators in Research and Industry
Subtitle of host publication17th International Conference on the Application of Accelerators in Research and Industry
PublisherAmerican Institute of Physics Inc.
Pages469-473
Number of pages5
Volume680
ISBN (Electronic)0735401497
DOIs
Publication statusPublished - Aug 26 2003
Event17th International Conference on the Application of Accelerators in Research and Industry - Denton, United States
Duration: Nov 12 2002Nov 16 2002

Other

Other17th International Conference on the Application of Accelerators in Research and Industry
CountryUnited States
CityDenton
Period11/12/0211/16/02

Fingerprint

ion implantation
ion beams
low resistance
radiation damage
Italy
ion sources
implantation
astrophysics
sensitivity
ions
energy

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Gialanella, L., Imbriani, G., Roca, V., Romano, M., De Cesare, N., D'Onofrio, A., ... Sanseverino, N. (2003). Wear Measurements by Means of Radioactive Ion Implantation. In Application of Accelerators in Research and Industry: 17th International Conference on the Application of Accelerators in Research and Industry (Vol. 680, pp. 469-473). American Institute of Physics Inc.. https://doi.org/10.1063/1.1619761

Wear Measurements by Means of Radioactive Ion Implantation. / Gialanella, L.; Imbriani, G.; Roca, V.; Romano, M.; De Cesare, N.; D'Onofrio, A.; Terrasi, F.; Becker, H. W.; Rogalla, D.; Stephan, A.; Strieder, F.; Fülöp, Zs. S.; Gyürky, G.; Somorjai, E.; Russo, M.; Daliento, D.; Sanseverino, N.

Application of Accelerators in Research and Industry: 17th International Conference on the Application of Accelerators in Research and Industry. Vol. 680 American Institute of Physics Inc., 2003. p. 469-473.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gialanella, L, Imbriani, G, Roca, V, Romano, M, De Cesare, N, D'Onofrio, A, Terrasi, F, Becker, HW, Rogalla, D, Stephan, A, Strieder, F, Fülöp, ZS, Gyürky, G, Somorjai, E, Russo, M, Daliento, D & Sanseverino, N 2003, Wear Measurements by Means of Radioactive Ion Implantation. in Application of Accelerators in Research and Industry: 17th International Conference on the Application of Accelerators in Research and Industry. vol. 680, American Institute of Physics Inc., pp. 469-473, 17th International Conference on the Application of Accelerators in Research and Industry, Denton, United States, 11/12/02. https://doi.org/10.1063/1.1619761
Gialanella L, Imbriani G, Roca V, Romano M, De Cesare N, D'Onofrio A et al. Wear Measurements by Means of Radioactive Ion Implantation. In Application of Accelerators in Research and Industry: 17th International Conference on the Application of Accelerators in Research and Industry. Vol. 680. American Institute of Physics Inc. 2003. p. 469-473 https://doi.org/10.1063/1.1619761
Gialanella, L. ; Imbriani, G. ; Roca, V. ; Romano, M. ; De Cesare, N. ; D'Onofrio, A. ; Terrasi, F. ; Becker, H. W. ; Rogalla, D. ; Stephan, A. ; Strieder, F. ; Fülöp, Zs. S. ; Gyürky, G. ; Somorjai, E. ; Russo, M. ; Daliento, D. ; Sanseverino, N. / Wear Measurements by Means of Radioactive Ion Implantation. Application of Accelerators in Research and Industry: 17th International Conference on the Application of Accelerators in Research and Industry. Vol. 680 American Institute of Physics Inc., 2003. pp. 469-473
@inproceedings{33d0f5fcde8b46dfb555b323391baf57,
title = "Wear Measurements by Means of Radioactive Ion Implantation",
abstract = "Radioactive ion implantation allows non-contacting, online wear measurements with sub micrometric sensitivity to be performed, by monitoring the removed and/or residual activity on parts subject to wear. Comparative studies of different materials, including those who exhibit a low resistance to radiation damage, can be easily performed by means of this technique. A project has started at the TTT3 tandem of the University {"}Federico II{"} in Naples, Italy, in order to exploit such technique using a 7Be ion beam, that was developed to study the astrophysical important reaction 7Be(p,γ)8B. The 7Be ion beam is produced using a ion sputter source and accelerated to an energy up to 8.0 MeV. A novel setup allows control of the implanted ion depth distribution, and is a crucial point for the application of this technique. The 7Be ion beam production and implantation procedures are discussed. Finally, the results of some test measurements are presented.",
author = "L. Gialanella and G. Imbriani and V. Roca and M. Romano and {De Cesare}, N. and A. D'Onofrio and F. Terrasi and Becker, {H. W.} and D. Rogalla and A. Stephan and F. Strieder and F{\"u}l{\"o}p, {Zs. S.} and G. Gy{\"u}rky and E. Somorjai and M. Russo and D. Daliento and N. Sanseverino",
year = "2003",
month = "8",
day = "26",
doi = "10.1063/1.1619761",
language = "English",
volume = "680",
pages = "469--473",
booktitle = "Application of Accelerators in Research and Industry",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Wear Measurements by Means of Radioactive Ion Implantation

AU - Gialanella, L.

AU - Imbriani, G.

AU - Roca, V.

AU - Romano, M.

AU - De Cesare, N.

AU - D'Onofrio, A.

AU - Terrasi, F.

AU - Becker, H. W.

AU - Rogalla, D.

AU - Stephan, A.

AU - Strieder, F.

AU - Fülöp, Zs. S.

AU - Gyürky, G.

AU - Somorjai, E.

AU - Russo, M.

AU - Daliento, D.

AU - Sanseverino, N.

PY - 2003/8/26

Y1 - 2003/8/26

N2 - Radioactive ion implantation allows non-contacting, online wear measurements with sub micrometric sensitivity to be performed, by monitoring the removed and/or residual activity on parts subject to wear. Comparative studies of different materials, including those who exhibit a low resistance to radiation damage, can be easily performed by means of this technique. A project has started at the TTT3 tandem of the University "Federico II" in Naples, Italy, in order to exploit such technique using a 7Be ion beam, that was developed to study the astrophysical important reaction 7Be(p,γ)8B. The 7Be ion beam is produced using a ion sputter source and accelerated to an energy up to 8.0 MeV. A novel setup allows control of the implanted ion depth distribution, and is a crucial point for the application of this technique. The 7Be ion beam production and implantation procedures are discussed. Finally, the results of some test measurements are presented.

AB - Radioactive ion implantation allows non-contacting, online wear measurements with sub micrometric sensitivity to be performed, by monitoring the removed and/or residual activity on parts subject to wear. Comparative studies of different materials, including those who exhibit a low resistance to radiation damage, can be easily performed by means of this technique. A project has started at the TTT3 tandem of the University "Federico II" in Naples, Italy, in order to exploit such technique using a 7Be ion beam, that was developed to study the astrophysical important reaction 7Be(p,γ)8B. The 7Be ion beam is produced using a ion sputter source and accelerated to an energy up to 8.0 MeV. A novel setup allows control of the implanted ion depth distribution, and is a crucial point for the application of this technique. The 7Be ion beam production and implantation procedures are discussed. Finally, the results of some test measurements are presented.

UR - http://www.scopus.com/inward/record.url?scp=85021077052&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021077052&partnerID=8YFLogxK

U2 - 10.1063/1.1619761

DO - 10.1063/1.1619761

M3 - Conference contribution

AN - SCOPUS:85021077052

VL - 680

SP - 469

EP - 473

BT - Application of Accelerators in Research and Industry

PB - American Institute of Physics Inc.

ER -