Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites

Pavol Hvizdoš, Annamária Duszová, Viktor Puchý, Orsolya Tapasztó, Peter Kun, Ján Dusza, C. Balázsi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

Tribological behavior of ZrO2 and Si3N4 based nanocomposites with addition of carbon nanofibres and nanotubes has been studied by the pin-on-disc technique. Friction coefficients were measured and recorded, wear rates were calculated in terms of material volume loss per load and sliding distance. The wear damage was studied using optical and electron microscopy and its mechanisms were identified. In monolithic materials the dominant wear mechanism was abrasion, in composites with CNF and with higher volume fraction of CNTs (5 and 10%) fiber pull-out and lubricating by the carbon phases occurred.

Original languageEnglish
Title of host publicationKey Engineering Materials
Pages495-498
Number of pages4
Volume465
DOIs
Publication statusPublished - 2011
Event6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6" - Brno, Czech Republic
Duration: Jun 28 2010Jun 30 2010

Publication series

NameKey Engineering Materials
Volume465
ISSN (Print)10139826

Other

Other6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6"
CountryCzech Republic
CityBrno
Period6/28/106/30/10

Fingerprint

Nanocomposites
Wear of materials
Carbon Nanotubes
Carbon nanofibers
Abrasion
Electron microscopy
Optical microscopy
Volume fraction
Carbon nanotubes
Carbon
Friction
Fibers
Composite materials
silicon nitride

Keywords

  • Carbon nanofiber
  • Nanotube
  • Sin
  • Wear
  • ZrO

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Hvizdoš, P., Duszová, A., Puchý, V., Tapasztó, O., Kun, P., Dusza, J., & Balázsi, C. (2011). Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites. In Key Engineering Materials (Vol. 465, pp. 495-498). (Key Engineering Materials; Vol. 465). https://doi.org/10.4028/www.scientific.net/KEM.465.495

Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites. / Hvizdoš, Pavol; Duszová, Annamária; Puchý, Viktor; Tapasztó, Orsolya; Kun, Peter; Dusza, Ján; Balázsi, C.

Key Engineering Materials. Vol. 465 2011. p. 495-498 (Key Engineering Materials; Vol. 465).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hvizdoš, P, Duszová, A, Puchý, V, Tapasztó, O, Kun, P, Dusza, J & Balázsi, C 2011, Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites. in Key Engineering Materials. vol. 465, Key Engineering Materials, vol. 465, pp. 495-498, 6th International Conference "Materials Structure and Micromechanics of Fracture, MSMF-6", Brno, Czech Republic, 6/28/10. https://doi.org/10.4028/www.scientific.net/KEM.465.495
Hvizdoš P, Duszová A, Puchý V, Tapasztó O, Kun P, Dusza J et al. Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites. In Key Engineering Materials. Vol. 465. 2011. p. 495-498. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.465.495
Hvizdoš, Pavol ; Duszová, Annamária ; Puchý, Viktor ; Tapasztó, Orsolya ; Kun, Peter ; Dusza, Ján ; Balázsi, C. / Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites. Key Engineering Materials. Vol. 465 2011. pp. 495-498 (Key Engineering Materials).
@inproceedings{a1be54abb40d49d9a53e1af69af65443,
title = "Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites",
abstract = "Tribological behavior of ZrO2 and Si3N4 based nanocomposites with addition of carbon nanofibres and nanotubes has been studied by the pin-on-disc technique. Friction coefficients were measured and recorded, wear rates were calculated in terms of material volume loss per load and sliding distance. The wear damage was studied using optical and electron microscopy and its mechanisms were identified. In monolithic materials the dominant wear mechanism was abrasion, in composites with CNF and with higher volume fraction of CNTs (5 and 10{\%}) fiber pull-out and lubricating by the carbon phases occurred.",
keywords = "Carbon nanofiber, Nanotube, Sin, Wear, ZrO",
author = "Pavol Hvizdoš and Annam{\'a}ria Duszov{\'a} and Viktor Puch{\'y} and Orsolya Tapaszt{\'o} and Peter Kun and J{\'a}n Dusza and C. Bal{\'a}zsi",
year = "2011",
doi = "10.4028/www.scientific.net/KEM.465.495",
language = "English",
isbn = "9783037850060",
volume = "465",
series = "Key Engineering Materials",
pages = "495--498",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Wear behavior of ZrO2-CNF and Si3N4-CNT nanocomposites

AU - Hvizdoš, Pavol

AU - Duszová, Annamária

AU - Puchý, Viktor

AU - Tapasztó, Orsolya

AU - Kun, Peter

AU - Dusza, Ján

AU - Balázsi, C.

PY - 2011

Y1 - 2011

N2 - Tribological behavior of ZrO2 and Si3N4 based nanocomposites with addition of carbon nanofibres and nanotubes has been studied by the pin-on-disc technique. Friction coefficients were measured and recorded, wear rates were calculated in terms of material volume loss per load and sliding distance. The wear damage was studied using optical and electron microscopy and its mechanisms were identified. In monolithic materials the dominant wear mechanism was abrasion, in composites with CNF and with higher volume fraction of CNTs (5 and 10%) fiber pull-out and lubricating by the carbon phases occurred.

AB - Tribological behavior of ZrO2 and Si3N4 based nanocomposites with addition of carbon nanofibres and nanotubes has been studied by the pin-on-disc technique. Friction coefficients were measured and recorded, wear rates were calculated in terms of material volume loss per load and sliding distance. The wear damage was studied using optical and electron microscopy and its mechanisms were identified. In monolithic materials the dominant wear mechanism was abrasion, in composites with CNF and with higher volume fraction of CNTs (5 and 10%) fiber pull-out and lubricating by the carbon phases occurred.

KW - Carbon nanofiber

KW - Nanotube

KW - Sin

KW - Wear

KW - ZrO

UR - http://www.scopus.com/inward/record.url?scp=79952841850&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79952841850&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.465.495

DO - 10.4028/www.scientific.net/KEM.465.495

M3 - Conference contribution

AN - SCOPUS:79952841850

SN - 9783037850060

VL - 465

T3 - Key Engineering Materials

SP - 495

EP - 498

BT - Key Engineering Materials

ER -