Vacancies in plastically deformed copper

M. Zehetbauer, E. Schafler, T. Ungár

Research output: Contribution to journalArticle

23 Citations (Scopus)

Abstract

In discussing hardening characteristics in terms of crystalline lattice defects, in most cases the properties and kinetics of dislocations and their arrangement have been considered. However, during plastic deformation also vacancies and/or vacancy-type defects are produced in very high densities which are typically close to those of vacancies in thermal equilibrium at the melting point. This paper presents measurements of deformation-induced vacancies in deformed copper which have been achieved by combined evaluation of resistometry, calorimetry and X-ray diffraction. The density of vacancies during and after severe plastic deformation (SPD) deformation is found to be markedly higher than in cases of conventional deformation and/or coarse-grained material, which is attributed to the particular conditions of SPD, i. e., the enhanced hydrostatic pressure as well as the changes in the deformation path. The use of synchrotron radiation allows to apply the XPA method for in-situ deformation monitoring of intrinsic structural parameters. This also includes deformation-induced vacancies, evaluated by the diffuse background of Bragg peak profiles.

Original languageEnglish
Pages (from-to)1044-1048
Number of pages5
JournalZeitschrift fuer Metallkunde/Materials Research and Advanced Techniques
Volume96
Issue number9
Publication statusPublished - Sep 2005

Fingerprint

Vacancies
Copper
copper
plastic deformation
Plastic deformation
Crystal defects
defects
Calorimetry
Hydrostatic pressure
Synchrotron radiation
hydrostatic pressure
hardening
melting points
Melting point
Hardening
synchrotron radiation
heat measurement
Crystalline materials
X ray diffraction
Defects

Keywords

  • Plastic de-formation
  • Vacancies
  • Vacancy agglomerates

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Vacancies in plastically deformed copper. / Zehetbauer, M.; Schafler, E.; Ungár, T.

In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, Vol. 96, No. 9, 09.2005, p. 1044-1048.

Research output: Contribution to journalArticle

@article{02aba0e2173842f485c9516946ff1838,
title = "Vacancies in plastically deformed copper",
abstract = "In discussing hardening characteristics in terms of crystalline lattice defects, in most cases the properties and kinetics of dislocations and their arrangement have been considered. However, during plastic deformation also vacancies and/or vacancy-type defects are produced in very high densities which are typically close to those of vacancies in thermal equilibrium at the melting point. This paper presents measurements of deformation-induced vacancies in deformed copper which have been achieved by combined evaluation of resistometry, calorimetry and X-ray diffraction. The density of vacancies during and after severe plastic deformation (SPD) deformation is found to be markedly higher than in cases of conventional deformation and/or coarse-grained material, which is attributed to the particular conditions of SPD, i. e., the enhanced hydrostatic pressure as well as the changes in the deformation path. The use of synchrotron radiation allows to apply the XPA method for in-situ deformation monitoring of intrinsic structural parameters. This also includes deformation-induced vacancies, evaluated by the diffuse background of Bragg peak profiles.",
keywords = "Plastic de-formation, Vacancies, Vacancy agglomerates",
author = "M. Zehetbauer and E. Schafler and T. Ung{\'a}r",
year = "2005",
month = "9",
language = "English",
volume = "96",
pages = "1044--1048",
journal = "International Journal of Materials Research",
issn = "1862-5282",
publisher = "Carl Hanser Verlag GmbH & Co. KG",
number = "9",

}

TY - JOUR

T1 - Vacancies in plastically deformed copper

AU - Zehetbauer, M.

AU - Schafler, E.

AU - Ungár, T.

PY - 2005/9

Y1 - 2005/9

N2 - In discussing hardening characteristics in terms of crystalline lattice defects, in most cases the properties and kinetics of dislocations and their arrangement have been considered. However, during plastic deformation also vacancies and/or vacancy-type defects are produced in very high densities which are typically close to those of vacancies in thermal equilibrium at the melting point. This paper presents measurements of deformation-induced vacancies in deformed copper which have been achieved by combined evaluation of resistometry, calorimetry and X-ray diffraction. The density of vacancies during and after severe plastic deformation (SPD) deformation is found to be markedly higher than in cases of conventional deformation and/or coarse-grained material, which is attributed to the particular conditions of SPD, i. e., the enhanced hydrostatic pressure as well as the changes in the deformation path. The use of synchrotron radiation allows to apply the XPA method for in-situ deformation monitoring of intrinsic structural parameters. This also includes deformation-induced vacancies, evaluated by the diffuse background of Bragg peak profiles.

AB - In discussing hardening characteristics in terms of crystalline lattice defects, in most cases the properties and kinetics of dislocations and their arrangement have been considered. However, during plastic deformation also vacancies and/or vacancy-type defects are produced in very high densities which are typically close to those of vacancies in thermal equilibrium at the melting point. This paper presents measurements of deformation-induced vacancies in deformed copper which have been achieved by combined evaluation of resistometry, calorimetry and X-ray diffraction. The density of vacancies during and after severe plastic deformation (SPD) deformation is found to be markedly higher than in cases of conventional deformation and/or coarse-grained material, which is attributed to the particular conditions of SPD, i. e., the enhanced hydrostatic pressure as well as the changes in the deformation path. The use of synchrotron radiation allows to apply the XPA method for in-situ deformation monitoring of intrinsic structural parameters. This also includes deformation-induced vacancies, evaluated by the diffuse background of Bragg peak profiles.

KW - Plastic de-formation

KW - Vacancies

KW - Vacancy agglomerates

UR - http://www.scopus.com/inward/record.url?scp=27144449056&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=27144449056&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:27144449056

VL - 96

SP - 1044

EP - 1048

JO - International Journal of Materials Research

JF - International Journal of Materials Research

SN - 1862-5282

IS - 9

ER -