Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform

G. Kolumbán, Tamas Krebesz, Chi K. Tse, Francis C M Lau

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In Software Defined Electronics (SDE), the software and hardware components are completely separated. Every information processing system from communications to measurement engineering is implemented in BaseBand (BB) on a SW platform and the interface between the baseband and RF/microwave domains is assured by a universal HW device. Due to the universality of HW device, the implementation of different RF/microwave equipment requires only the change of SW in the application layer. Matlab simulators are used to evaluate the feasibility and performance of new signal processing algorithms and equipment everywhere from the academia to industry. This contribution shows how a Matlab BB simulator developed to determine the system performance of an FM-DCSK transceiver can be integrated directly into the SDE platform. The usability and the effectiveness of SDE approach is verified by comparing the simulated BB and measured 2.4-GHz microwave signals.

Original languageEnglish
Title of host publication2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings
Publication statusPublished - 2013
Event2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Dresden, Germany
Duration: Sep 8 2013Sep 12 2013

Other

Other2013 European Conference on Circuit Theory and Design, ECCTD 2013
CountryGermany
CityDresden
Period9/8/139/12/13

Fingerprint

Transceivers
Electronic equipment
Simulators
Microwaves
Signal processing
Hardware
Communication
Industry

ASJC Scopus subject areas

  • Hardware and Architecture

Cite this

Kolumbán, G., Krebesz, T., Tse, C. K., & Lau, F. C. M. (2013). Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform. In 2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings [6662286]

Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform. / Kolumbán, G.; Krebesz, Tamas; Tse, Chi K.; Lau, Francis C M.

2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings. 2013. 6662286.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kolumbán, G, Krebesz, T, Tse, CK & Lau, FCM 2013, Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform. in 2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings., 6662286, 2013 European Conference on Circuit Theory and Design, ECCTD 2013, Dresden, Germany, 9/8/13.
Kolumbán G, Krebesz T, Tse CK, Lau FCM. Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform. In 2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings. 2013. 6662286
Kolumbán, G. ; Krebesz, Tamas ; Tse, Chi K. ; Lau, Francis C M. / Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform. 2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings. 2013.
@inproceedings{e9d74cdefec94c97986ea7e7d7d29ccc,
title = "Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform",
abstract = "In Software Defined Electronics (SDE), the software and hardware components are completely separated. Every information processing system from communications to measurement engineering is implemented in BaseBand (BB) on a SW platform and the interface between the baseband and RF/microwave domains is assured by a universal HW device. Due to the universality of HW device, the implementation of different RF/microwave equipment requires only the change of SW in the application layer. Matlab simulators are used to evaluate the feasibility and performance of new signal processing algorithms and equipment everywhere from the academia to industry. This contribution shows how a Matlab BB simulator developed to determine the system performance of an FM-DCSK transceiver can be integrated directly into the SDE platform. The usability and the effectiveness of SDE approach is verified by comparing the simulated BB and measured 2.4-GHz microwave signals.",
author = "G. Kolumb{\'a}n and Tamas Krebesz and Tse, {Chi K.} and Lau, {Francis C M}",
year = "2013",
language = "English",
isbn = "9783000437854",
booktitle = "2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings",

}

TY - GEN

T1 - Turn your baseband Matlab simulator into a fully functional, 2.4-GHz, operating FM-DCSK transceiver using SDE platform

AU - Kolumbán, G.

AU - Krebesz, Tamas

AU - Tse, Chi K.

AU - Lau, Francis C M

PY - 2013

Y1 - 2013

N2 - In Software Defined Electronics (SDE), the software and hardware components are completely separated. Every information processing system from communications to measurement engineering is implemented in BaseBand (BB) on a SW platform and the interface between the baseband and RF/microwave domains is assured by a universal HW device. Due to the universality of HW device, the implementation of different RF/microwave equipment requires only the change of SW in the application layer. Matlab simulators are used to evaluate the feasibility and performance of new signal processing algorithms and equipment everywhere from the academia to industry. This contribution shows how a Matlab BB simulator developed to determine the system performance of an FM-DCSK transceiver can be integrated directly into the SDE platform. The usability and the effectiveness of SDE approach is verified by comparing the simulated BB and measured 2.4-GHz microwave signals.

AB - In Software Defined Electronics (SDE), the software and hardware components are completely separated. Every information processing system from communications to measurement engineering is implemented in BaseBand (BB) on a SW platform and the interface between the baseband and RF/microwave domains is assured by a universal HW device. Due to the universality of HW device, the implementation of different RF/microwave equipment requires only the change of SW in the application layer. Matlab simulators are used to evaluate the feasibility and performance of new signal processing algorithms and equipment everywhere from the academia to industry. This contribution shows how a Matlab BB simulator developed to determine the system performance of an FM-DCSK transceiver can be integrated directly into the SDE platform. The usability and the effectiveness of SDE approach is verified by comparing the simulated BB and measured 2.4-GHz microwave signals.

UR - http://www.scopus.com/inward/record.url?scp=84892660616&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84892660616&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84892660616

SN - 9783000437854

BT - 2013 European Conference on Circuit Theory and Design, ECCTD 2013 - Proceedings

ER -