TOOTH CONTACT ANALYSIS FOR MODIFIED HYPOID GEARS.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Abstract

Theoretically conjugate hypoid gears can be manufactured, but they are not practical because of their sensitivity to the misalignments inherent in any real gear housing. In order to obtain the required adjustability there are introduced into the teeth of one or both members carefully chosen modifications with different machine setting and cutter specifications. The analysis given in this paper, adjusts the pinion running position so that at an initially selected point on the gear the correct velocity ratio is produced. After the correct relative running position is established the analysis determines the path of contact and the characteristics of the transmitted motion.

Original languageEnglish
Pages87-92
Number of pages6
Publication statusPublished - Jan 1 1975
EventUnknown conference -
Duration: Sep 8 1975Sep 11 1975

Other

OtherUnknown conference
Period9/8/759/11/75

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Simon, V. (1975). TOOTH CONTACT ANALYSIS FOR MODIFIED HYPOID GEARS.. 87-92. Paper presented at Unknown conference, .