Theoretical value of total height of profile in rotational turning

István Sztankovics, J. Kundrák

Research output: Chapter in Book/Report/Conference proceedingChapter

14 Citations (Scopus)

Abstract

The roughness of the machined surface is determined by the kinematics of chip removal, the shaping and the geometry of the cutting edge. The change of the surface roughness in cutting done under different conditions is easy to follow examining the theoretical value of roughness characteristics. This paper examines how the extent of the theoretical value of total height of profile depends on the different technological parameters in rotational turning. Furthermore the surface roughness and roughness profile is compared achievable by rotational turning and traditional longitudinal turning (in case of radius and pointed cutting tool).

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages154-161
Number of pages8
Volume309
DOIs
Publication statusPublished - 2013
Event3rd Central European Conference on Logistics, CECOL 2012 - Trnava, Slovakia
Duration: Nov 28 2012Nov 30 2012

Publication series

NameApplied Mechanics and Materials
Volume309
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other3rd Central European Conference on Logistics, CECOL 2012
CountrySlovakia
CityTrnava
Period11/28/1211/30/12

Fingerprint

Surface roughness
Cutting tools
Kinematics
Geometry

Keywords

  • Rotational turning
  • Theoretical surface roughness
  • Total height of profile

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Sztankovics, I., & Kundrák, J. (2013). Theoretical value of total height of profile in rotational turning. In Applied Mechanics and Materials (Vol. 309, pp. 154-161). (Applied Mechanics and Materials; Vol. 309). https://doi.org/10.4028/www.scientific.net/AMM.309.154

Theoretical value of total height of profile in rotational turning. / Sztankovics, István; Kundrák, J.

Applied Mechanics and Materials. Vol. 309 2013. p. 154-161 (Applied Mechanics and Materials; Vol. 309).

Research output: Chapter in Book/Report/Conference proceedingChapter

Sztankovics, I & Kundrák, J 2013, Theoretical value of total height of profile in rotational turning. in Applied Mechanics and Materials. vol. 309, Applied Mechanics and Materials, vol. 309, pp. 154-161, 3rd Central European Conference on Logistics, CECOL 2012, Trnava, Slovakia, 11/28/12. https://doi.org/10.4028/www.scientific.net/AMM.309.154
Sztankovics I, Kundrák J. Theoretical value of total height of profile in rotational turning. In Applied Mechanics and Materials. Vol. 309. 2013. p. 154-161. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.309.154
Sztankovics, István ; Kundrák, J. / Theoretical value of total height of profile in rotational turning. Applied Mechanics and Materials. Vol. 309 2013. pp. 154-161 (Applied Mechanics and Materials).
@inbook{796c42e123d7492cb2b4f5244c9c4ac1,
title = "Theoretical value of total height of profile in rotational turning",
abstract = "The roughness of the machined surface is determined by the kinematics of chip removal, the shaping and the geometry of the cutting edge. The change of the surface roughness in cutting done under different conditions is easy to follow examining the theoretical value of roughness characteristics. This paper examines how the extent of the theoretical value of total height of profile depends on the different technological parameters in rotational turning. Furthermore the surface roughness and roughness profile is compared achievable by rotational turning and traditional longitudinal turning (in case of radius and pointed cutting tool).",
keywords = "Rotational turning, Theoretical surface roughness, Total height of profile",
author = "Istv{\'a}n Sztankovics and J. Kundr{\'a}k",
year = "2013",
doi = "10.4028/www.scientific.net/AMM.309.154",
language = "English",
isbn = "9783037856369",
volume = "309",
series = "Applied Mechanics and Materials",
pages = "154--161",
booktitle = "Applied Mechanics and Materials",

}

TY - CHAP

T1 - Theoretical value of total height of profile in rotational turning

AU - Sztankovics, István

AU - Kundrák, J.

PY - 2013

Y1 - 2013

N2 - The roughness of the machined surface is determined by the kinematics of chip removal, the shaping and the geometry of the cutting edge. The change of the surface roughness in cutting done under different conditions is easy to follow examining the theoretical value of roughness characteristics. This paper examines how the extent of the theoretical value of total height of profile depends on the different technological parameters in rotational turning. Furthermore the surface roughness and roughness profile is compared achievable by rotational turning and traditional longitudinal turning (in case of radius and pointed cutting tool).

AB - The roughness of the machined surface is determined by the kinematics of chip removal, the shaping and the geometry of the cutting edge. The change of the surface roughness in cutting done under different conditions is easy to follow examining the theoretical value of roughness characteristics. This paper examines how the extent of the theoretical value of total height of profile depends on the different technological parameters in rotational turning. Furthermore the surface roughness and roughness profile is compared achievable by rotational turning and traditional longitudinal turning (in case of radius and pointed cutting tool).

KW - Rotational turning

KW - Theoretical surface roughness

KW - Total height of profile

UR - http://www.scopus.com/inward/record.url?scp=84874883818&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874883818&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.309.154

DO - 10.4028/www.scientific.net/AMM.309.154

M3 - Chapter

AN - SCOPUS:84874883818

SN - 9783037856369

VL - 309

T3 - Applied Mechanics and Materials

SP - 154

EP - 161

BT - Applied Mechanics and Materials

ER -