Surface quality of hard turned bore holes

J. Kundrak, P. H. Osanna, A. Afjehi-Sadat, V. Bana

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Hard turning is used more and more frequently for finishing of precision hardened bores, namely for replacement of grinding. This paper studies the experimental results performed for qualifying of surfaces machined with hard boring. It presents the results of surface roughness measurements (2D, 3D) and indicates the changes occurring in the surface layer. It proves that the presented surface quality characteristics of the investigated parts suit the requirements moreover in some cases they are even better than characteristics of surfaces machined by grinding. As a summary it is stated if the cutting parameters are chosen well, surfaces and/or parts with better wear resistance and higher durability can be manufactured.

Original languageEnglish
Title of host publication18th IMEKO World Congress 2006
Subtitle of host publicationMetrology for a Sustainable Development
Pages1044-1049
Number of pages6
Publication statusPublished - Dec 1 2006
Event18th IMEKO World Congress 2006: Metrology for a Sustainable Development - Rio de Janeiro, Brazil
Duration: Sep 17 2006Sep 22 2006

Publication series

Name18th IMEKO World Congress 2006: Metrology for a Sustainable Development
Volume2

Other

Other18th IMEKO World Congress 2006: Metrology for a Sustainable Development
CountryBrazil
CityRio de Janeiro
Period9/17/069/22/06

    Fingerprint

Keywords

  • Hardened bore holes
  • Roughness
  • Surface measurement

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Kundrak, J., Osanna, P. H., Afjehi-Sadat, A., & Bana, V. (2006). Surface quality of hard turned bore holes. In 18th IMEKO World Congress 2006: Metrology for a Sustainable Development (pp. 1044-1049). (18th IMEKO World Congress 2006: Metrology for a Sustainable Development; Vol. 2).