Styrene-butadiene rubber/graphene nanocomposites

Effect of comilling with cyclic butylene-terephthalate

István Halász, T. Bárány

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Graphene nanoplatelets (GnP) reinforced styrene-butadiene rubber (SBR) nanocomposites were produced by two different methods. For reference purpose carbon black (CB) reinforced formulations served. In the first method the components were mixed on a two roll open mill directly. In the second method, GnP was subjected to milling in an attritor mill together with cyclic butylene-terephthalate oligomer (CBT) powder prior to the mixing on two roll mill. Samples were cured in a hot press. The rubber sheets were characterized by tensile and tear tests, and their fracture surfaces inspected in scanning electron microscopy (SEM). Results showed that GnP outperformed CB with respect to reinforcing effect. Previous co-milling of GnP with CBT caused a slight decrease in mechanical properties. SEM images proved, that the co-milling process did not affect significantly the dispersion of GnP, its particles were shredded into smaller pieces, which caused the slight decrease in the mechanical properties.

Original languageEnglish
Title of host publicationMaterials Science, Testing and Informatics VII
PublisherTrans Tech Publications Ltd
Pages65-70
Number of pages6
Volume812
ISBN (Print)9783038353898
DOIs
Publication statusPublished - 2015
Event9th Hungarian Conference on Materials Science, 2013 - Balatonkenese, Hungary
Duration: Oct 13 2013Oct 15 2013

Publication series

NameMaterials Science Forum
Volume812
ISSN (Print)02555476

Other

Other9th Hungarian Conference on Materials Science, 2013
CountryHungary
CityBalatonkenese
Period10/13/1310/15/13

Fingerprint

terephthalate
Graphite
butenes
butadiene
Butadiene
rubber
styrenes
Graphene
Styrene
Nanocomposites
nanocomposites
graphene
Rubber
Soot
Carbon black
oligomers
Oligomers
mechanical properties
Mechanical properties
Scanning electron microscopy

Keywords

  • CB
  • Dispersion
  • Elastomer
  • Graphene nanoplatelets
  • Milling
  • Nanocomposite
  • SBR

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Halász, I., & Bárány, T. (2015). Styrene-butadiene rubber/graphene nanocomposites: Effect of comilling with cyclic butylene-terephthalate. In Materials Science, Testing and Informatics VII (Vol. 812, pp. 65-70). (Materials Science Forum; Vol. 812). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.812.65

Styrene-butadiene rubber/graphene nanocomposites : Effect of comilling with cyclic butylene-terephthalate. / Halász, István; Bárány, T.

Materials Science, Testing and Informatics VII. Vol. 812 Trans Tech Publications Ltd, 2015. p. 65-70 (Materials Science Forum; Vol. 812).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Halász, I & Bárány, T 2015, Styrene-butadiene rubber/graphene nanocomposites: Effect of comilling with cyclic butylene-terephthalate. in Materials Science, Testing and Informatics VII. vol. 812, Materials Science Forum, vol. 812, Trans Tech Publications Ltd, pp. 65-70, 9th Hungarian Conference on Materials Science, 2013, Balatonkenese, Hungary, 10/13/13. https://doi.org/10.4028/www.scientific.net/MSF.812.65
Halász I, Bárány T. Styrene-butadiene rubber/graphene nanocomposites: Effect of comilling with cyclic butylene-terephthalate. In Materials Science, Testing and Informatics VII. Vol. 812. Trans Tech Publications Ltd. 2015. p. 65-70. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.812.65
Halász, István ; Bárány, T. / Styrene-butadiene rubber/graphene nanocomposites : Effect of comilling with cyclic butylene-terephthalate. Materials Science, Testing and Informatics VII. Vol. 812 Trans Tech Publications Ltd, 2015. pp. 65-70 (Materials Science Forum).
@inproceedings{7ccf9c3e4c2841d29eff6f3707e07ba2,
title = "Styrene-butadiene rubber/graphene nanocomposites: Effect of comilling with cyclic butylene-terephthalate",
abstract = "Graphene nanoplatelets (GnP) reinforced styrene-butadiene rubber (SBR) nanocomposites were produced by two different methods. For reference purpose carbon black (CB) reinforced formulations served. In the first method the components were mixed on a two roll open mill directly. In the second method, GnP was subjected to milling in an attritor mill together with cyclic butylene-terephthalate oligomer (CBT) powder prior to the mixing on two roll mill. Samples were cured in a hot press. The rubber sheets were characterized by tensile and tear tests, and their fracture surfaces inspected in scanning electron microscopy (SEM). Results showed that GnP outperformed CB with respect to reinforcing effect. Previous co-milling of GnP with CBT caused a slight decrease in mechanical properties. SEM images proved, that the co-milling process did not affect significantly the dispersion of GnP, its particles were shredded into smaller pieces, which caused the slight decrease in the mechanical properties.",
keywords = "CB, Dispersion, Elastomer, Graphene nanoplatelets, Milling, Nanocomposite, SBR",
author = "Istv{\'a}n Hal{\'a}sz and T. B{\'a}r{\'a}ny",
year = "2015",
doi = "10.4028/www.scientific.net/MSF.812.65",
language = "English",
isbn = "9783038353898",
volume = "812",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "65--70",
booktitle = "Materials Science, Testing and Informatics VII",

}

TY - GEN

T1 - Styrene-butadiene rubber/graphene nanocomposites

T2 - Effect of comilling with cyclic butylene-terephthalate

AU - Halász, István

AU - Bárány, T.

PY - 2015

Y1 - 2015

N2 - Graphene nanoplatelets (GnP) reinforced styrene-butadiene rubber (SBR) nanocomposites were produced by two different methods. For reference purpose carbon black (CB) reinforced formulations served. In the first method the components were mixed on a two roll open mill directly. In the second method, GnP was subjected to milling in an attritor mill together with cyclic butylene-terephthalate oligomer (CBT) powder prior to the mixing on two roll mill. Samples were cured in a hot press. The rubber sheets were characterized by tensile and tear tests, and their fracture surfaces inspected in scanning electron microscopy (SEM). Results showed that GnP outperformed CB with respect to reinforcing effect. Previous co-milling of GnP with CBT caused a slight decrease in mechanical properties. SEM images proved, that the co-milling process did not affect significantly the dispersion of GnP, its particles were shredded into smaller pieces, which caused the slight decrease in the mechanical properties.

AB - Graphene nanoplatelets (GnP) reinforced styrene-butadiene rubber (SBR) nanocomposites were produced by two different methods. For reference purpose carbon black (CB) reinforced formulations served. In the first method the components were mixed on a two roll open mill directly. In the second method, GnP was subjected to milling in an attritor mill together with cyclic butylene-terephthalate oligomer (CBT) powder prior to the mixing on two roll mill. Samples were cured in a hot press. The rubber sheets were characterized by tensile and tear tests, and their fracture surfaces inspected in scanning electron microscopy (SEM). Results showed that GnP outperformed CB with respect to reinforcing effect. Previous co-milling of GnP with CBT caused a slight decrease in mechanical properties. SEM images proved, that the co-milling process did not affect significantly the dispersion of GnP, its particles were shredded into smaller pieces, which caused the slight decrease in the mechanical properties.

KW - CB

KW - Dispersion

KW - Elastomer

KW - Graphene nanoplatelets

KW - Milling

KW - Nanocomposite

KW - SBR

UR - http://www.scopus.com/inward/record.url?scp=84924537082&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84924537082&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.812.65

DO - 10.4028/www.scientific.net/MSF.812.65

M3 - Conference contribution

SN - 9783038353898

VL - 812

T3 - Materials Science Forum

SP - 65

EP - 70

BT - Materials Science, Testing and Informatics VII

PB - Trans Tech Publications Ltd

ER -