Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique

M. R. Gonal, B. C. Maji, M. Krishnan, I. Pallavi, A. Gyore, I. Vajda

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Y123 (YBa2Cu3O7-δ) cylinders were fabricated by Melt Texture Growth (MTG) technique using two different composites. First composite was prepared by addition of 25 wt% of Yttria and 1 % Pt to pre-reacted Y123, and the second composite was prepared by addition of 25 wt% of Yttria and 1wt % Ceria to pre-reacted Y-123. Cylinder shaped green compacts of both the composite were fabricated by pressing in cold isostatic press. These green compacts were sintered at 930°C before subjecting to MTG technique. The MTG cylinders were characterized by Scanning Electron Microscope (SEM), Electron Probe Micro Analysis (EPMA) and then correlated with electrical properties like Critical current density (Jc).

Original languageEnglish
Title of host publicationDAE Solid State Physics Symposium 2016
PublisherAmerican Institute of Physics Inc.
Volume1832
ISBN (Electronic)9780735415003
DOIs
Publication statusPublished - May 19 2017
Event61st DAE Solid State Physics Symposium - Bhubaneswar, Odisha, India
Duration: Dec 26 2016Dec 30 2016

Other

Other61st DAE Solid State Physics Symposium
CountryIndia
CityBhubaneswar, Odisha
Period12/26/1612/30/16

Fingerprint

electrical properties
microstructure
composite materials
textures
electron probes
pressing
microanalysis
critical current
electron microscopes
current density
scanning

Keywords

  • Critical current density
  • High temperature superconductor

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Gonal, M. R., Maji, B. C., Krishnan, M., Pallavi, I., Gyore, A., & Vajda, I. (2017). Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique. In DAE Solid State Physics Symposium 2016 (Vol. 1832). [130010] American Institute of Physics Inc.. https://doi.org/10.1063/1.4980730

Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique. / Gonal, M. R.; Maji, B. C.; Krishnan, M.; Pallavi, I.; Gyore, A.; Vajda, I.

DAE Solid State Physics Symposium 2016. Vol. 1832 American Institute of Physics Inc., 2017. 130010.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gonal, MR, Maji, BC, Krishnan, M, Pallavi, I, Gyore, A & Vajda, I 2017, Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique. in DAE Solid State Physics Symposium 2016. vol. 1832, 130010, American Institute of Physics Inc., 61st DAE Solid State Physics Symposium, Bhubaneswar, Odisha, India, 12/26/16. https://doi.org/10.1063/1.4980730
Gonal MR, Maji BC, Krishnan M, Pallavi I, Gyore A, Vajda I. Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique. In DAE Solid State Physics Symposium 2016. Vol. 1832. American Institute of Physics Inc. 2017. 130010 https://doi.org/10.1063/1.4980730
Gonal, M. R. ; Maji, B. C. ; Krishnan, M. ; Pallavi, I. ; Gyore, A. ; Vajda, I. / Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique. DAE Solid State Physics Symposium 2016. Vol. 1832 American Institute of Physics Inc., 2017.
@inproceedings{1acc32ca48544a6a81519a01136f2233,
title = "Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique",
abstract = "Y123 (YBa2Cu3O7-δ) cylinders were fabricated by Melt Texture Growth (MTG) technique using two different composites. First composite was prepared by addition of 25 wt{\%} of Yttria and 1 {\%} Pt to pre-reacted Y123, and the second composite was prepared by addition of 25 wt{\%} of Yttria and 1wt {\%} Ceria to pre-reacted Y-123. Cylinder shaped green compacts of both the composite were fabricated by pressing in cold isostatic press. These green compacts were sintered at 930°C before subjecting to MTG technique. The MTG cylinders were characterized by Scanning Electron Microscope (SEM), Electron Probe Micro Analysis (EPMA) and then correlated with electrical properties like Critical current density (Jc).",
keywords = "Critical current density, High temperature superconductor",
author = "Gonal, {M. R.} and Maji, {B. C.} and M. Krishnan and I. Pallavi and A. Gyore and I. Vajda",
year = "2017",
month = "5",
day = "19",
doi = "10.1063/1.4980730",
language = "English",
volume = "1832",
booktitle = "DAE Solid State Physics Symposium 2016",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Study of microstructure and electrical properties of Y123 cylinders prepared by melt textured growth technique

AU - Gonal, M. R.

AU - Maji, B. C.

AU - Krishnan, M.

AU - Pallavi, I.

AU - Gyore, A.

AU - Vajda, I.

PY - 2017/5/19

Y1 - 2017/5/19

N2 - Y123 (YBa2Cu3O7-δ) cylinders were fabricated by Melt Texture Growth (MTG) technique using two different composites. First composite was prepared by addition of 25 wt% of Yttria and 1 % Pt to pre-reacted Y123, and the second composite was prepared by addition of 25 wt% of Yttria and 1wt % Ceria to pre-reacted Y-123. Cylinder shaped green compacts of both the composite were fabricated by pressing in cold isostatic press. These green compacts were sintered at 930°C before subjecting to MTG technique. The MTG cylinders were characterized by Scanning Electron Microscope (SEM), Electron Probe Micro Analysis (EPMA) and then correlated with electrical properties like Critical current density (Jc).

AB - Y123 (YBa2Cu3O7-δ) cylinders were fabricated by Melt Texture Growth (MTG) technique using two different composites. First composite was prepared by addition of 25 wt% of Yttria and 1 % Pt to pre-reacted Y123, and the second composite was prepared by addition of 25 wt% of Yttria and 1wt % Ceria to pre-reacted Y-123. Cylinder shaped green compacts of both the composite were fabricated by pressing in cold isostatic press. These green compacts were sintered at 930°C before subjecting to MTG technique. The MTG cylinders were characterized by Scanning Electron Microscope (SEM), Electron Probe Micro Analysis (EPMA) and then correlated with electrical properties like Critical current density (Jc).

KW - Critical current density

KW - High temperature superconductor

UR - http://www.scopus.com/inward/record.url?scp=85020300082&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020300082&partnerID=8YFLogxK

U2 - 10.1063/1.4980730

DO - 10.1063/1.4980730

M3 - Conference contribution

VL - 1832

BT - DAE Solid State Physics Symposium 2016

PB - American Institute of Physics Inc.

ER -