Studies of electrodeposited chroniumcobalt alloy coatings by emission Co-57 Mössbauer spectroscopy

I. Czakó-Nagy, M. K. El-Sharif, A. Vértes, C. U. Chisholm

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Deposit of chroniumcobalt (CrCo) alloys have been prepared by direct current (dc) electrodeposition from chromium(III)-dimethylformamide based electrolyte. By changing two electrolysis parameters (current density and electrolyte temperature) alloys of various cobalt content were obtained. Mössbauer spectroscopy (MS) measurements revealed that cobalt rich deposits (up to 80 w/o) consisted of a single ferromagnetic phase, an alloy of about 44 w/o cobalt contained a mixture of ferromagnetic phase and the paramagnetic phase. Measurements indicated that alloys with high chromium content (72-82 w/o) consisted of a single paramagnetic Co/Cr phase.

Original languageEnglish
Pages (from-to)801-805
Number of pages5
JournalElectrochimica Acta
Volume39
Issue number6
DOIs
Publication statusPublished - 1994

Fingerprint

Cobalt
Spectroscopy
Coatings
Chromium
Electrolytes
Deposits
Dimethylformamide
Electrolysis
Electrodeposition
Current density
Temperature

Keywords

  • cobalt alloys
  • codeposition
  • effect of plating parameters
  • electrodeposits
  • emission Mössbauer spectroscopy

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Analytical Chemistry
  • Electrochemistry

Cite this

Studies of electrodeposited chroniumcobalt alloy coatings by emission Co-57 Mössbauer spectroscopy. / Czakó-Nagy, I.; El-Sharif, M. K.; Vértes, A.; Chisholm, C. U.

In: Electrochimica Acta, Vol. 39, No. 6, 1994, p. 801-805.

Research output: Contribution to journalArticle

Czakó-Nagy, I. ; El-Sharif, M. K. ; Vértes, A. ; Chisholm, C. U. / Studies of electrodeposited chroniumcobalt alloy coatings by emission Co-57 Mössbauer spectroscopy. In: Electrochimica Acta. 1994 ; Vol. 39, No. 6. pp. 801-805.
@article{8e941ac5657543d7823e69bf3367d284,
title = "Studies of electrodeposited chroniumcobalt alloy coatings by emission Co-57 M{\"o}ssbauer spectroscopy",
abstract = "Deposit of chroniumcobalt (CrCo) alloys have been prepared by direct current (dc) electrodeposition from chromium(III)-dimethylformamide based electrolyte. By changing two electrolysis parameters (current density and electrolyte temperature) alloys of various cobalt content were obtained. M{\"o}ssbauer spectroscopy (MS) measurements revealed that cobalt rich deposits (up to 80 w/o) consisted of a single ferromagnetic phase, an alloy of about 44 w/o cobalt contained a mixture of ferromagnetic phase and the paramagnetic phase. Measurements indicated that alloys with high chromium content (72-82 w/o) consisted of a single paramagnetic Co/Cr phase.",
keywords = "cobalt alloys, codeposition, effect of plating parameters, electrodeposits, emission M{\"o}ssbauer spectroscopy",
author = "I. Czak{\'o}-Nagy and El-Sharif, {M. K.} and A. V{\'e}rtes and Chisholm, {C. U.}",
year = "1994",
doi = "10.1016/0013-4686(94)80030-8",
language = "English",
volume = "39",
pages = "801--805",
journal = "Electrochimica Acta",
issn = "0013-4686",
publisher = "Elsevier Limited",
number = "6",

}

TY - JOUR

T1 - Studies of electrodeposited chroniumcobalt alloy coatings by emission Co-57 Mössbauer spectroscopy

AU - Czakó-Nagy, I.

AU - El-Sharif, M. K.

AU - Vértes, A.

AU - Chisholm, C. U.

PY - 1994

Y1 - 1994

N2 - Deposit of chroniumcobalt (CrCo) alloys have been prepared by direct current (dc) electrodeposition from chromium(III)-dimethylformamide based electrolyte. By changing two electrolysis parameters (current density and electrolyte temperature) alloys of various cobalt content were obtained. Mössbauer spectroscopy (MS) measurements revealed that cobalt rich deposits (up to 80 w/o) consisted of a single ferromagnetic phase, an alloy of about 44 w/o cobalt contained a mixture of ferromagnetic phase and the paramagnetic phase. Measurements indicated that alloys with high chromium content (72-82 w/o) consisted of a single paramagnetic Co/Cr phase.

AB - Deposit of chroniumcobalt (CrCo) alloys have been prepared by direct current (dc) electrodeposition from chromium(III)-dimethylformamide based electrolyte. By changing two electrolysis parameters (current density and electrolyte temperature) alloys of various cobalt content were obtained. Mössbauer spectroscopy (MS) measurements revealed that cobalt rich deposits (up to 80 w/o) consisted of a single ferromagnetic phase, an alloy of about 44 w/o cobalt contained a mixture of ferromagnetic phase and the paramagnetic phase. Measurements indicated that alloys with high chromium content (72-82 w/o) consisted of a single paramagnetic Co/Cr phase.

KW - cobalt alloys

KW - codeposition

KW - effect of plating parameters

KW - electrodeposits

KW - emission Mössbauer spectroscopy

UR - http://www.scopus.com/inward/record.url?scp=0028406520&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028406520&partnerID=8YFLogxK

U2 - 10.1016/0013-4686(94)80030-8

DO - 10.1016/0013-4686(94)80030-8

M3 - Article

AN - SCOPUS:0028406520

VL - 39

SP - 801

EP - 805

JO - Electrochimica Acta

JF - Electrochimica Acta

SN - 0013-4686

IS - 6

ER -