Studies of copper corrosion inhibition using electrochemical quartz crystal nanobalance and quartz crystal immittance techniques

L. Sziráki, Zs Pilbáth, K. Papp, E. Kálmán

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

Several copper corrosion inhibitors were tested including benzotriazole (BTA), thiourea, potassium ethyl xanthate (KEtX), octadecyl mercaptan, and Bricorr-288®. The corrosion breakdown potentials were evaluated using the electrochemical quartz crystal nanobalance (EQCN) technique, by recording linear potential scan voltammetric (i-E) and piezogravimetric (m-E) characteristics. Effects of single inhibitors and their mixtures on the value of the breakdown potential were investigated. Previously found synergistic effects for a mixture of BTA+KEtX and a mixture of TU+KEtX inhibitors were confirmed. The most effective among the copper corrosion inhibitors tested appeared to be Bricorr-288. The representative inhibitor films were subsequently tested using the quartz crystal immittance (QCI) technique. New equations based on experimental admittance data were derived to characterize the film acoustic resistance and the resonator parallel capacitance. On the basis of these equations, a new procedure to evalua te passive elements of the equivalent BVD electrical circuit, has been proposed. A decrease in the admittance maximum, appearing near the resonance frequency, was observed for octadecyl mercaptan and Bricorr-288 films on copper.

Original languageEnglish
Pages (from-to)3801-3815
Number of pages15
JournalElectrochimica Acta
Volume46
Issue number24-25
DOIs
Publication statusPublished - Aug 15 2001

Fingerprint

Copper corrosion
Quartz
Corrosion inhibitors
Sulfhydryl Compounds
Crystals
Thiourea
Thioureas
Potassium
Copper
Resonators
Capacitance
Acoustics
Corrosion
Networks (circuits)
benzotriazole

Keywords

  • Copper
  • Corrosion breakdown potential
  • Corrosion inhibitors
  • Electrochemical quartz crystal nanobalance
  • Quartz crystal immittance technique

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Analytical Chemistry
  • Electrochemistry

Cite this

Studies of copper corrosion inhibition using electrochemical quartz crystal nanobalance and quartz crystal immittance techniques. / Sziráki, L.; Pilbáth, Zs; Papp, K.; Kálmán, E.

In: Electrochimica Acta, Vol. 46, No. 24-25, 15.08.2001, p. 3801-3815.

Research output: Contribution to journalArticle

@article{fa27a65651e844d197a3491511c011ba,
title = "Studies of copper corrosion inhibition using electrochemical quartz crystal nanobalance and quartz crystal immittance techniques",
abstract = "Several copper corrosion inhibitors were tested including benzotriazole (BTA), thiourea, potassium ethyl xanthate (KEtX), octadecyl mercaptan, and Bricorr-288{\circledR}. The corrosion breakdown potentials were evaluated using the electrochemical quartz crystal nanobalance (EQCN) technique, by recording linear potential scan voltammetric (i-E) and piezogravimetric (m-E) characteristics. Effects of single inhibitors and their mixtures on the value of the breakdown potential were investigated. Previously found synergistic effects for a mixture of BTA+KEtX and a mixture of TU+KEtX inhibitors were confirmed. The most effective among the copper corrosion inhibitors tested appeared to be Bricorr-288. The representative inhibitor films were subsequently tested using the quartz crystal immittance (QCI) technique. New equations based on experimental admittance data were derived to characterize the film acoustic resistance and the resonator parallel capacitance. On the basis of these equations, a new procedure to evalua te passive elements of the equivalent BVD electrical circuit, has been proposed. A decrease in the admittance maximum, appearing near the resonance frequency, was observed for octadecyl mercaptan and Bricorr-288 films on copper.",
keywords = "Copper, Corrosion breakdown potential, Corrosion inhibitors, Electrochemical quartz crystal nanobalance, Quartz crystal immittance technique",
author = "L. Szir{\'a}ki and Zs Pilb{\'a}th and K. Papp and E. K{\'a}lm{\'a}n",
year = "2001",
month = "8",
day = "15",
doi = "10.1016/S0013-4686(01)00667-3",
language = "English",
volume = "46",
pages = "3801--3815",
journal = "Electrochimica Acta",
issn = "0013-4686",
publisher = "Elsevier Limited",
number = "24-25",

}

TY - JOUR

T1 - Studies of copper corrosion inhibition using electrochemical quartz crystal nanobalance and quartz crystal immittance techniques

AU - Sziráki, L.

AU - Pilbáth, Zs

AU - Papp, K.

AU - Kálmán, E.

PY - 2001/8/15

Y1 - 2001/8/15

N2 - Several copper corrosion inhibitors were tested including benzotriazole (BTA), thiourea, potassium ethyl xanthate (KEtX), octadecyl mercaptan, and Bricorr-288®. The corrosion breakdown potentials were evaluated using the electrochemical quartz crystal nanobalance (EQCN) technique, by recording linear potential scan voltammetric (i-E) and piezogravimetric (m-E) characteristics. Effects of single inhibitors and their mixtures on the value of the breakdown potential were investigated. Previously found synergistic effects for a mixture of BTA+KEtX and a mixture of TU+KEtX inhibitors were confirmed. The most effective among the copper corrosion inhibitors tested appeared to be Bricorr-288. The representative inhibitor films were subsequently tested using the quartz crystal immittance (QCI) technique. New equations based on experimental admittance data were derived to characterize the film acoustic resistance and the resonator parallel capacitance. On the basis of these equations, a new procedure to evalua te passive elements of the equivalent BVD electrical circuit, has been proposed. A decrease in the admittance maximum, appearing near the resonance frequency, was observed for octadecyl mercaptan and Bricorr-288 films on copper.

AB - Several copper corrosion inhibitors were tested including benzotriazole (BTA), thiourea, potassium ethyl xanthate (KEtX), octadecyl mercaptan, and Bricorr-288®. The corrosion breakdown potentials were evaluated using the electrochemical quartz crystal nanobalance (EQCN) technique, by recording linear potential scan voltammetric (i-E) and piezogravimetric (m-E) characteristics. Effects of single inhibitors and their mixtures on the value of the breakdown potential were investigated. Previously found synergistic effects for a mixture of BTA+KEtX and a mixture of TU+KEtX inhibitors were confirmed. The most effective among the copper corrosion inhibitors tested appeared to be Bricorr-288. The representative inhibitor films were subsequently tested using the quartz crystal immittance (QCI) technique. New equations based on experimental admittance data were derived to characterize the film acoustic resistance and the resonator parallel capacitance. On the basis of these equations, a new procedure to evalua te passive elements of the equivalent BVD electrical circuit, has been proposed. A decrease in the admittance maximum, appearing near the resonance frequency, was observed for octadecyl mercaptan and Bricorr-288 films on copper.

KW - Copper

KW - Corrosion breakdown potential

KW - Corrosion inhibitors

KW - Electrochemical quartz crystal nanobalance

KW - Quartz crystal immittance technique

UR - http://www.scopus.com/inward/record.url?scp=0035880490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035880490&partnerID=8YFLogxK

U2 - 10.1016/S0013-4686(01)00667-3

DO - 10.1016/S0013-4686(01)00667-3

M3 - Article

AN - SCOPUS:0035880490

VL - 46

SP - 3801

EP - 3815

JO - Electrochimica Acta

JF - Electrochimica Acta

SN - 0013-4686

IS - 24-25

ER -