Stress-strain curves of superplastic alloys

A. Juhász, P. Tasnádi, N. Chinh, I. Kovács

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Force-elongation and stress-strain curves have been analysed for superplastically deformed alloys tested in uniaxial tension under constant cross-head velocity conditions. By considering instability criteria the curves can be divided into three characteristic stages. In the course of the first two stages the samples are work hardened while during the third stage no work hardening takes place, although 85 to 90% of the total deformation occurs at this stage. However, sometimes at the end of stage III a weak strain hardening appears again due to grain growth. From the analysis of stage III the strain-rate sensitivity can be determined in good agreement with other methods.

Original languageEnglish
Pages (from-to)3679-3684
Number of pages6
JournalJournal of Materials Science
Volume22
Issue number10
DOIs
Publication statusPublished - Oct 1987

Fingerprint

Stress-strain curves
Strain hardening
work hardening
strain hardening
curves
Grain growth
elongation
strain rate
Strain rate
Elongation

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Electronic, Optical and Magnetic Materials
  • Materials Science(all)

Cite this

Stress-strain curves of superplastic alloys. / Juhász, A.; Tasnádi, P.; Chinh, N.; Kovács, I.

In: Journal of Materials Science, Vol. 22, No. 10, 10.1987, p. 3679-3684.

Research output: Contribution to journalArticle

Juhász, A. ; Tasnádi, P. ; Chinh, N. ; Kovács, I. / Stress-strain curves of superplastic alloys. In: Journal of Materials Science. 1987 ; Vol. 22, No. 10. pp. 3679-3684.
@article{ab1fe6f4d4864e3d91fa2acb91852444,
title = "Stress-strain curves of superplastic alloys",
abstract = "Force-elongation and stress-strain curves have been analysed for superplastically deformed alloys tested in uniaxial tension under constant cross-head velocity conditions. By considering instability criteria the curves can be divided into three characteristic stages. In the course of the first two stages the samples are work hardened while during the third stage no work hardening takes place, although 85 to 90{\%} of the total deformation occurs at this stage. However, sometimes at the end of stage III a weak strain hardening appears again due to grain growth. From the analysis of stage III the strain-rate sensitivity can be determined in good agreement with other methods.",
author = "A. Juh{\'a}sz and P. Tasn{\'a}di and N. Chinh and I. Kov{\'a}cs",
year = "1987",
month = "10",
doi = "10.1007/BF01161477",
language = "English",
volume = "22",
pages = "3679--3684",
journal = "Journal of Materials Science",
issn = "0022-2461",
publisher = "Springer Netherlands",
number = "10",

}

TY - JOUR

T1 - Stress-strain curves of superplastic alloys

AU - Juhász, A.

AU - Tasnádi, P.

AU - Chinh, N.

AU - Kovács, I.

PY - 1987/10

Y1 - 1987/10

N2 - Force-elongation and stress-strain curves have been analysed for superplastically deformed alloys tested in uniaxial tension under constant cross-head velocity conditions. By considering instability criteria the curves can be divided into three characteristic stages. In the course of the first two stages the samples are work hardened while during the third stage no work hardening takes place, although 85 to 90% of the total deformation occurs at this stage. However, sometimes at the end of stage III a weak strain hardening appears again due to grain growth. From the analysis of stage III the strain-rate sensitivity can be determined in good agreement with other methods.

AB - Force-elongation and stress-strain curves have been analysed for superplastically deformed alloys tested in uniaxial tension under constant cross-head velocity conditions. By considering instability criteria the curves can be divided into three characteristic stages. In the course of the first two stages the samples are work hardened while during the third stage no work hardening takes place, although 85 to 90% of the total deformation occurs at this stage. However, sometimes at the end of stage III a weak strain hardening appears again due to grain growth. From the analysis of stage III the strain-rate sensitivity can be determined in good agreement with other methods.

UR - http://www.scopus.com/inward/record.url?scp=0023436186&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0023436186&partnerID=8YFLogxK

U2 - 10.1007/BF01161477

DO - 10.1007/BF01161477

M3 - Article

AN - SCOPUS:0023436186

VL - 22

SP - 3679

EP - 3684

JO - Journal of Materials Science

JF - Journal of Materials Science

SN - 0022-2461

IS - 10

ER -