Gefügebetrachtung einer laserumgeschmolzenen TiC- und WC-haltigen Al-legierungsschicht

Translated title of the contribution: Some observations made in the structure of laser-remelted layer of TiC- and WC-alloyed Al-alloy

András Roósz, J. Sólyom, I. Teleszky

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The surfaces of the alloys Al-4%Cu-0.5%Si and Al-4.5%Cu-1.0%Si have been laser beam remelted while particles of TiC and WC were added. The resulting structures were examined by means of scanning electron microscopy and light microscopy. The most striking difference between both sorts of particles is the following: TiC particles do not penetrate the oxide layer on the surface of the sample and are agglomerated at the surface of the sample while WC particles are not hindered by the oxide layer and will be embedded in the remelted zone. This singnificant difference is caused by differences of the density and, hence, by differences in the kinetic energy while impinging at the surface of the sample. Furthermore, WC particles were partially dissolved in the melt leading to a precipitation of fine W2C particles.

Original languageGerman
Pages (from-to)448-455
Number of pages8
JournalPraktische Metallographie/Practical Metallography
Volume35
Issue number8
Publication statusPublished - Aug 1998

Fingerprint

Lasers
Oxides
lasers
Kinetic energy
Optical microscopy
Laser beams
oxides
Scanning electron microscopy
kinetic energy
laser beams
microscopy
scanning electron microscopy

ASJC Scopus subject areas

  • Metals and Alloys

Cite this

Gefügebetrachtung einer laserumgeschmolzenen TiC- und WC-haltigen Al-legierungsschicht. / Roósz, András; Sólyom, J.; Teleszky, I.

In: Praktische Metallographie/Practical Metallography, Vol. 35, No. 8, 08.1998, p. 448-455.

Research output: Contribution to journalArticle

@article{b38f44c8574047d4a9bf0c003a52c18f,
title = "Gef{\"u}gebetrachtung einer laserumgeschmolzenen TiC- und WC-haltigen Al-legierungsschicht",
abstract = "The surfaces of the alloys Al-4{\%}Cu-0.5{\%}Si and Al-4.5{\%}Cu-1.0{\%}Si have been laser beam remelted while particles of TiC and WC were added. The resulting structures were examined by means of scanning electron microscopy and light microscopy. The most striking difference between both sorts of particles is the following: TiC particles do not penetrate the oxide layer on the surface of the sample and are agglomerated at the surface of the sample while WC particles are not hindered by the oxide layer and will be embedded in the remelted zone. This singnificant difference is caused by differences of the density and, hence, by differences in the kinetic energy while impinging at the surface of the sample. Furthermore, WC particles were partially dissolved in the melt leading to a precipitation of fine W2C particles.",
author = "Andr{\'a}s Ro{\'o}sz and J. S{\'o}lyom and I. Teleszky",
year = "1998",
month = "8",
language = "German",
volume = "35",
pages = "448--455",
journal = "Praktische Metallographie/Practical Metallography",
issn = "0032-678X",
publisher = "Carl Hanser Verlag GmbH & Co. KG",
number = "8",

}

TY - JOUR

T1 - Gefügebetrachtung einer laserumgeschmolzenen TiC- und WC-haltigen Al-legierungsschicht

AU - Roósz, András

AU - Sólyom, J.

AU - Teleszky, I.

PY - 1998/8

Y1 - 1998/8

N2 - The surfaces of the alloys Al-4%Cu-0.5%Si and Al-4.5%Cu-1.0%Si have been laser beam remelted while particles of TiC and WC were added. The resulting structures were examined by means of scanning electron microscopy and light microscopy. The most striking difference between both sorts of particles is the following: TiC particles do not penetrate the oxide layer on the surface of the sample and are agglomerated at the surface of the sample while WC particles are not hindered by the oxide layer and will be embedded in the remelted zone. This singnificant difference is caused by differences of the density and, hence, by differences in the kinetic energy while impinging at the surface of the sample. Furthermore, WC particles were partially dissolved in the melt leading to a precipitation of fine W2C particles.

AB - The surfaces of the alloys Al-4%Cu-0.5%Si and Al-4.5%Cu-1.0%Si have been laser beam remelted while particles of TiC and WC were added. The resulting structures were examined by means of scanning electron microscopy and light microscopy. The most striking difference between both sorts of particles is the following: TiC particles do not penetrate the oxide layer on the surface of the sample and are agglomerated at the surface of the sample while WC particles are not hindered by the oxide layer and will be embedded in the remelted zone. This singnificant difference is caused by differences of the density and, hence, by differences in the kinetic energy while impinging at the surface of the sample. Furthermore, WC particles were partially dissolved in the melt leading to a precipitation of fine W2C particles.

UR - http://www.scopus.com/inward/record.url?scp=0032139586&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032139586&partnerID=8YFLogxK

M3 - Article

VL - 35

SP - 448

EP - 455

JO - Praktische Metallographie/Practical Metallography

JF - Praktische Metallographie/Practical Metallography

SN - 0032-678X

IS - 8

ER -