Sensitivity of stability charts with respect to modal parameter uncertainties for turning operations

Research output: Contribution to journalArticle

Abstract

Stability prediction of machining operations is often not reliable due to the inaccurate mechanical modeling. A major source of this inaccuracy is the uncertainties in the dynamic parameters of the machining center at different spindle speeds. The measured frequency response functions of the tool are usually loaded by noise and identification of the operational modal behavior based on static measurements is not straightforward. In this paper, the effect of small changes of the frequency response function on the stability of turning processes is analyzed using the semi-discretization method and the single-frequency solution.

Original languageEnglish
Pages (from-to)63-68
Number of pages6
JournalIFAC-PapersOnLine
Volume48
Issue number12
DOIs
Publication statusPublished - 2015

Fingerprint

Frequency response
Machining centers
Machining
Uncertainty

Keywords

  • frequency response function
  • machine tool chatter
  • regenerative delay
  • sensitivity

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Sensitivity of stability charts with respect to modal parameter uncertainties for turning operations. / Hajdu, David; Insperger, T.; Stépán, G.

In: IFAC-PapersOnLine, Vol. 48, No. 12, 2015, p. 63-68.

Research output: Contribution to journalArticle

@article{e88c04f7af4043cfb657d344e30ec738,
title = "Sensitivity of stability charts with respect to modal parameter uncertainties for turning operations",
abstract = "Stability prediction of machining operations is often not reliable due to the inaccurate mechanical modeling. A major source of this inaccuracy is the uncertainties in the dynamic parameters of the machining center at different spindle speeds. The measured frequency response functions of the tool are usually loaded by noise and identification of the operational modal behavior based on static measurements is not straightforward. In this paper, the effect of small changes of the frequency response function on the stability of turning processes is analyzed using the semi-discretization method and the single-frequency solution.",
keywords = "frequency response function, machine tool chatter, regenerative delay, sensitivity",
author = "David Hajdu and T. Insperger and G. St{\'e}p{\'a}n",
year = "2015",
doi = "10.1016/j.ifacol.2015.09.354",
language = "English",
volume = "48",
pages = "63--68",
journal = "IFAC-PapersOnLine",
issn = "2405-8963",
publisher = "IFAC Secretariat",
number = "12",

}

TY - JOUR

T1 - Sensitivity of stability charts with respect to modal parameter uncertainties for turning operations

AU - Hajdu, David

AU - Insperger, T.

AU - Stépán, G.

PY - 2015

Y1 - 2015

N2 - Stability prediction of machining operations is often not reliable due to the inaccurate mechanical modeling. A major source of this inaccuracy is the uncertainties in the dynamic parameters of the machining center at different spindle speeds. The measured frequency response functions of the tool are usually loaded by noise and identification of the operational modal behavior based on static measurements is not straightforward. In this paper, the effect of small changes of the frequency response function on the stability of turning processes is analyzed using the semi-discretization method and the single-frequency solution.

AB - Stability prediction of machining operations is often not reliable due to the inaccurate mechanical modeling. A major source of this inaccuracy is the uncertainties in the dynamic parameters of the machining center at different spindle speeds. The measured frequency response functions of the tool are usually loaded by noise and identification of the operational modal behavior based on static measurements is not straightforward. In this paper, the effect of small changes of the frequency response function on the stability of turning processes is analyzed using the semi-discretization method and the single-frequency solution.

KW - frequency response function

KW - machine tool chatter

KW - regenerative delay

KW - sensitivity

UR - http://www.scopus.com/inward/record.url?scp=84975475983&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84975475983&partnerID=8YFLogxK

U2 - 10.1016/j.ifacol.2015.09.354

DO - 10.1016/j.ifacol.2015.09.354

M3 - Article

AN - SCOPUS:84975475983

VL - 48

SP - 63

EP - 68

JO - IFAC-PapersOnLine

JF - IFAC-PapersOnLine

SN - 2405-8963

IS - 12

ER -