Selection of a proper chemical analytical procedure for process control

Janos Inczedy, Attila Felinger

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A complex computer program was developed for the simulation of a control loop in which an analytical measuring system is included and in which the characteristics of the process to be controlled as well as the characteristics of the measuring system can be selected freely. Both the process and analyzer were modelled using first order and dead time models. The attainable index of controllability of the process at given conditions was calculated. Using the model and the computer program, the degree of controllability of a technological process under given conditions was calculated in three different cases, by using three different analytical measurement techniques. The results were used for optimization of process control and for informative calculation and prediction of the most cost efficient production. The optimum parameters of the controller unit were determined by minimum variance tuning.

Original languageEnglish
Pages (from-to)53-61
Number of pages9
JournalProcess Control and Quality
Volume1
Issue number1
Publication statusPublished - Nov 1 1990

    Fingerprint

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this