Residual stress characterisation of grit blasted steel surfaces

J. M. Guilemany, N. Llorca-Isern, P. Szabó

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

With most surface engineering procedures it is necessary to create good initial surface conditions. In the case of thermal spraying processes it is recommended that a rough surface is created to enhance adhesion of the coating, especially when the coating contains ceramics. For optimum mechanical properties, in particular fatigue behaviour, the surface must remain in a compressive stress state. When high velocity oxyfuel spraying is used a compressive residual stress condition is strongly advised in view of the pressure and velocity with which the powder particles reach the substrate. The method of surface preparation employed can strongly affect the resultant compressive stresses. The effects of grit blasting conditions on the resultant residual stress state have been studied. Compressive residual stress in the surface layer increases with grit blasting time. Time, gun-specimen distance, and impingement angle have also been evaluated and show complementary behaviour.

Original languageEnglish
Pages (from-to)77-79
Number of pages3
JournalSurface Engineering
Volume12
Issue number1
Publication statusPublished - 1996

Fingerprint

grit
Steel
residual stress
Residual stresses
steels
Compressive stress
spraying
Blasting
ceramic coatings
impingement
Thermal spraying
Ceramic coatings
Spraying
surface layers
adhesion
Powders
engineering
mechanical properties
Adhesion
coatings

ASJC Scopus subject areas

  • Surfaces, Coatings and Films
  • Surfaces and Interfaces

Cite this

Residual stress characterisation of grit blasted steel surfaces. / Guilemany, J. M.; Llorca-Isern, N.; Szabó, P.

In: Surface Engineering, Vol. 12, No. 1, 1996, p. 77-79.

Research output: Contribution to journalArticle

Guilemany, JM, Llorca-Isern, N & Szabó, P 1996, 'Residual stress characterisation of grit blasted steel surfaces', Surface Engineering, vol. 12, no. 1, pp. 77-79.
Guilemany, J. M. ; Llorca-Isern, N. ; Szabó, P. / Residual stress characterisation of grit blasted steel surfaces. In: Surface Engineering. 1996 ; Vol. 12, No. 1. pp. 77-79.
@article{81630c3840de41b7978943699c5f5efc,
title = "Residual stress characterisation of grit blasted steel surfaces",
abstract = "With most surface engineering procedures it is necessary to create good initial surface conditions. In the case of thermal spraying processes it is recommended that a rough surface is created to enhance adhesion of the coating, especially when the coating contains ceramics. For optimum mechanical properties, in particular fatigue behaviour, the surface must remain in a compressive stress state. When high velocity oxyfuel spraying is used a compressive residual stress condition is strongly advised in view of the pressure and velocity with which the powder particles reach the substrate. The method of surface preparation employed can strongly affect the resultant compressive stresses. The effects of grit blasting conditions on the resultant residual stress state have been studied. Compressive residual stress in the surface layer increases with grit blasting time. Time, gun-specimen distance, and impingement angle have also been evaluated and show complementary behaviour.",
author = "Guilemany, {J. M.} and N. Llorca-Isern and P. Szab{\'o}",
year = "1996",
language = "English",
volume = "12",
pages = "77--79",
journal = "Surface Engineering",
issn = "0267-0844",
publisher = "Maney Publishing",
number = "1",

}

TY - JOUR

T1 - Residual stress characterisation of grit blasted steel surfaces

AU - Guilemany, J. M.

AU - Llorca-Isern, N.

AU - Szabó, P.

PY - 1996

Y1 - 1996

N2 - With most surface engineering procedures it is necessary to create good initial surface conditions. In the case of thermal spraying processes it is recommended that a rough surface is created to enhance adhesion of the coating, especially when the coating contains ceramics. For optimum mechanical properties, in particular fatigue behaviour, the surface must remain in a compressive stress state. When high velocity oxyfuel spraying is used a compressive residual stress condition is strongly advised in view of the pressure and velocity with which the powder particles reach the substrate. The method of surface preparation employed can strongly affect the resultant compressive stresses. The effects of grit blasting conditions on the resultant residual stress state have been studied. Compressive residual stress in the surface layer increases with grit blasting time. Time, gun-specimen distance, and impingement angle have also been evaluated and show complementary behaviour.

AB - With most surface engineering procedures it is necessary to create good initial surface conditions. In the case of thermal spraying processes it is recommended that a rough surface is created to enhance adhesion of the coating, especially when the coating contains ceramics. For optimum mechanical properties, in particular fatigue behaviour, the surface must remain in a compressive stress state. When high velocity oxyfuel spraying is used a compressive residual stress condition is strongly advised in view of the pressure and velocity with which the powder particles reach the substrate. The method of surface preparation employed can strongly affect the resultant compressive stresses. The effects of grit blasting conditions on the resultant residual stress state have been studied. Compressive residual stress in the surface layer increases with grit blasting time. Time, gun-specimen distance, and impingement angle have also been evaluated and show complementary behaviour.

UR - http://www.scopus.com/inward/record.url?scp=0029707374&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029707374&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0029707374

VL - 12

SP - 77

EP - 79

JO - Surface Engineering

JF - Surface Engineering

SN - 0267-0844

IS - 1

ER -