Requirements for the industrial application of superconducting rotating electrical machines

I. Vajda, A. Szalay, N. Göbl, V. Meerovich, V. Sokolovsky

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

Original languageEnglish
Pages (from-to)1225-1228
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume9
Issue number2 PART 1
DOIs
Publication statusPublished - 1999

Fingerprint

rotating electrical machines
Industrial applications
conductors
armatures
requirements
stators
permanent magnets
Rare earths
Stators
Permanent magnets
rotors
electric contacts
rods
generators
rare earth elements
Rotors

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Physics and Astronomy (miscellaneous)

Cite this

Requirements for the industrial application of superconducting rotating electrical machines. / Vajda, I.; Szalay, A.; Göbl, N.; Meerovich, V.; Sokolovsky, V.

In: IEEE Transactions on Applied Superconductivity, Vol. 9, No. 2 PART 1, 1999, p. 1225-1228.

Research output: Contribution to journalArticle

Vajda, I. ; Szalay, A. ; Göbl, N. ; Meerovich, V. ; Sokolovsky, V. / Requirements for the industrial application of superconducting rotating electrical machines. In: IEEE Transactions on Applied Superconductivity. 1999 ; Vol. 9, No. 2 PART 1. pp. 1225-1228.
@article{e2a9b4632efb45e790212f3e63c62bae,
title = "Requirements for the industrial application of superconducting rotating electrical machines",
abstract = "The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..",
author = "I. Vajda and A. Szalay and N. G{\"o}bl and V. Meerovich and V. Sokolovsky",
year = "1999",
doi = "10.1109/77.783521",
language = "English",
volume = "9",
pages = "1225--1228",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2 PART 1",

}

TY - JOUR

T1 - Requirements for the industrial application of superconducting rotating electrical machines

AU - Vajda, I.

AU - Szalay, A.

AU - Göbl, N.

AU - Meerovich, V.

AU - Sokolovsky, V.

PY - 1999

Y1 - 1999

N2 - The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

AB - The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

UR - http://www.scopus.com/inward/record.url?scp=0032664149&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032664149&partnerID=8YFLogxK

U2 - 10.1109/77.783521

DO - 10.1109/77.783521

M3 - Article

AN - SCOPUS:0032664149

VL - 9

SP - 1225

EP - 1228

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 PART 1

ER -