Reduction of sensitivity of spiral bevel gears to misalignments by the use of appropriate machine tool settings

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The method for loaded tooth contact analysis is applied for the investigation of the combined influence of machine tool settings for pinion teeth finishing and misalignments of the mating members on load distribution and transmission errors in mismatched spiral bevel gears. By using the corresponding computer program the influence of pinion's offset and axial adjustment error, angular position error of the pinion axis, tooth spacing error, and machine tool setting variation for pinion teeth finishing, on tooth contact pressure, tooth root stresses and angular displacement of the driven gear member from the theoretically exact position based on the ratio of the numbers of teeth is investigated. The obtained results show that by the use of appropriate machine tool settings the influence of misalignments and tooth errors on maximum tooth contact pressure and transmission errors can be significantly reduced.

Original languageEnglish
Title of host publication2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007
Pages3-12
Number of pages10
DOIs
Publication statusPublished - Jun 13 2008
Event10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007 - Las Vegas, NV, United States
Duration: Sep 4 2007Sep 7 2007

Publication series

Name2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007
Volume7

Other

Other10th International Power Transmission and Gearing Conference, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007
CountryUnited States
CityLas Vegas, NV
Period9/4/079/7/07

    Fingerprint

ASJC Scopus subject areas

  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Mechanical Engineering
  • Modelling and Simulation

Cite this

Simon, V. V. (2008). Reduction of sensitivity of spiral bevel gears to misalignments by the use of appropriate machine tool settings. In 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007 (pp. 3-12). (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; Vol. 7). https://doi.org/10.1115/DETC2007-34013