Productivity considerations in face milling

J. Kundrák, Viktor Molnár, István Deszpoth, Tamás Makkai

Research output: Contribution to journalArticle

Abstract

The kinematic versions and applied tools of milling allow for the machining of several surfaces and surface combinations, making it a versatile and widely applied procedure. Face milling for cutting is used for the high productivity manufacturing of prismatic components. Naturally, the enhancement of productivity is a primary goal for manufacturing companies; this study analyzes the efficiency of material removal, which directly influences the time parameters characterizing production performed by face milling. The focus of the paper is to identify the selection of technological data (feed, feed rate, cutting speed, diameter of milling head) that can reduce the machining time or increase the values of material removal rate. Cutting experiments were carried out for machining prismatic components from AlSi9Cu3(Fe) aluminum alloy by diamond tools. It was found that within the performance limits of the manufacturing system it is possible to save a significant amount of manufacturing time while retaining the specified geometric accuracy and surface quality of the component.

Original languageEnglish
Pages (from-to)66-73
Number of pages8
JournalMaterials Science Forum
Volume952
DOIs
Publication statusPublished - Jan 1 2019

Fingerprint

productivity
machining
Milling (machining)
Productivity
manufacturing
Machining
geometric accuracy
Diamond
Surface properties
Aluminum alloys
Diamonds
retaining
Kinematics
aluminum alloys
kinematics
diamonds
augmentation
Industry
Experiments

Keywords

  • Face milling
  • Material removal rate
  • Precision machining

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Productivity considerations in face milling. / Kundrák, J.; Molnár, Viktor; Deszpoth, István; Makkai, Tamás.

In: Materials Science Forum, Vol. 952, 01.01.2019, p. 66-73.

Research output: Contribution to journalArticle

Kundrák, J. ; Molnár, Viktor ; Deszpoth, István ; Makkai, Tamás. / Productivity considerations in face milling. In: Materials Science Forum. 2019 ; Vol. 952. pp. 66-73.
@article{86b2b844282c48f08328866242b5a954,
title = "Productivity considerations in face milling",
abstract = "The kinematic versions and applied tools of milling allow for the machining of several surfaces and surface combinations, making it a versatile and widely applied procedure. Face milling for cutting is used for the high productivity manufacturing of prismatic components. Naturally, the enhancement of productivity is a primary goal for manufacturing companies; this study analyzes the efficiency of material removal, which directly influences the time parameters characterizing production performed by face milling. The focus of the paper is to identify the selection of technological data (feed, feed rate, cutting speed, diameter of milling head) that can reduce the machining time or increase the values of material removal rate. Cutting experiments were carried out for machining prismatic components from AlSi9Cu3(Fe) aluminum alloy by diamond tools. It was found that within the performance limits of the manufacturing system it is possible to save a significant amount of manufacturing time while retaining the specified geometric accuracy and surface quality of the component.",
keywords = "Face milling, Material removal rate, Precision machining",
author = "J. Kundr{\'a}k and Viktor Moln{\'a}r and Istv{\'a}n Deszpoth and Tam{\'a}s Makkai",
year = "2019",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/MSF.952.66",
language = "English",
volume = "952",
pages = "66--73",
journal = "Materials Science Forum",
issn = "0255-5476",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Productivity considerations in face milling

AU - Kundrák, J.

AU - Molnár, Viktor

AU - Deszpoth, István

AU - Makkai, Tamás

PY - 2019/1/1

Y1 - 2019/1/1

N2 - The kinematic versions and applied tools of milling allow for the machining of several surfaces and surface combinations, making it a versatile and widely applied procedure. Face milling for cutting is used for the high productivity manufacturing of prismatic components. Naturally, the enhancement of productivity is a primary goal for manufacturing companies; this study analyzes the efficiency of material removal, which directly influences the time parameters characterizing production performed by face milling. The focus of the paper is to identify the selection of technological data (feed, feed rate, cutting speed, diameter of milling head) that can reduce the machining time or increase the values of material removal rate. Cutting experiments were carried out for machining prismatic components from AlSi9Cu3(Fe) aluminum alloy by diamond tools. It was found that within the performance limits of the manufacturing system it is possible to save a significant amount of manufacturing time while retaining the specified geometric accuracy and surface quality of the component.

AB - The kinematic versions and applied tools of milling allow for the machining of several surfaces and surface combinations, making it a versatile and widely applied procedure. Face milling for cutting is used for the high productivity manufacturing of prismatic components. Naturally, the enhancement of productivity is a primary goal for manufacturing companies; this study analyzes the efficiency of material removal, which directly influences the time parameters characterizing production performed by face milling. The focus of the paper is to identify the selection of technological data (feed, feed rate, cutting speed, diameter of milling head) that can reduce the machining time or increase the values of material removal rate. Cutting experiments were carried out for machining prismatic components from AlSi9Cu3(Fe) aluminum alloy by diamond tools. It was found that within the performance limits of the manufacturing system it is possible to save a significant amount of manufacturing time while retaining the specified geometric accuracy and surface quality of the component.

KW - Face milling

KW - Material removal rate

KW - Precision machining

UR - http://www.scopus.com/inward/record.url?scp=85066255177&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85066255177&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.952.66

DO - 10.4028/www.scientific.net/MSF.952.66

M3 - Article

AN - SCOPUS:85066255177

VL - 952

SP - 66

EP - 73

JO - Materials Science Forum

JF - Materials Science Forum

SN - 0255-5476

ER -