Novel IT approaches and solutions towards real-time, cooperative enterprises

L. Monostori, J. Váncza, T. Kis, B. Kádár, G. Erdos, D. Karnok, P. Egri

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In addition of the four main R&D directions, i.e., adaptive manufacturing, digital manufacturing, knowledge-based manufacturing, and networked manufacturing, emphasized by the European initiative Manufuture, two additional requirements, i.e., the real-timeness and cooperativeness of production structures are also outlined in the paper, which are of high and increasing importance. The paper also underlines the main requirements of customized mass production, with special emphasis on the real-time ability and cooperativeness. Main goals of a large-scale national industry-academia R&D project aimed at improving the performance of a production network that produces consumer goods in large quantities and variability are highlighted. An integrated approach is presented for planning the behavior of the system at network-, factory- and plant level, as well as for adapting various plans to real execution conditions.

Original languageEnglish
Title of host publicationIFAC Proceedings Volumes (IFAC-PapersOnline)
Pages720-727
Number of pages8
Volume13
EditionPART 1
DOIs
Publication statusPublished - 2009
Event13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09 - Moscow, Russian Federation
Duration: Jun 3 2009Jun 5 2009

Other

Other13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09
CountryRussian Federation
CityMoscow
Period6/3/096/5/09

Fingerprint

Industry
Industrial plants
Planning

Keywords

  • Adaptive manufacturing
  • Cooperative production
  • Digital manufacturing
  • Mass customization
  • Real-time control

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Monostori, L., Váncza, J., Kis, T., Kádár, B., Erdos, G., Karnok, D., & Egri, P. (2009). Novel IT approaches and solutions towards real-time, cooperative enterprises. In IFAC Proceedings Volumes (IFAC-PapersOnline) (PART 1 ed., Vol. 13, pp. 720-727) https://doi.org/10.3182/20090603-3-RU-2001.0588

Novel IT approaches and solutions towards real-time, cooperative enterprises. / Monostori, L.; Váncza, J.; Kis, T.; Kádár, B.; Erdos, G.; Karnok, D.; Egri, P.

IFAC Proceedings Volumes (IFAC-PapersOnline). Vol. 13 PART 1. ed. 2009. p. 720-727.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monostori, L, Váncza, J, Kis, T, Kádár, B, Erdos, G, Karnok, D & Egri, P 2009, Novel IT approaches and solutions towards real-time, cooperative enterprises. in IFAC Proceedings Volumes (IFAC-PapersOnline). PART 1 edn, vol. 13, pp. 720-727, 13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09, Moscow, Russian Federation, 6/3/09. https://doi.org/10.3182/20090603-3-RU-2001.0588
Monostori L, Váncza J, Kis T, Kádár B, Erdos G, Karnok D et al. Novel IT approaches and solutions towards real-time, cooperative enterprises. In IFAC Proceedings Volumes (IFAC-PapersOnline). PART 1 ed. Vol. 13. 2009. p. 720-727 https://doi.org/10.3182/20090603-3-RU-2001.0588
Monostori, L. ; Váncza, J. ; Kis, T. ; Kádár, B. ; Erdos, G. ; Karnok, D. ; Egri, P. / Novel IT approaches and solutions towards real-time, cooperative enterprises. IFAC Proceedings Volumes (IFAC-PapersOnline). Vol. 13 PART 1. ed. 2009. pp. 720-727
@inproceedings{eedd8931697547a1ad5f13e73ee2a135,
title = "Novel IT approaches and solutions towards real-time, cooperative enterprises",
abstract = "In addition of the four main R&D directions, i.e., adaptive manufacturing, digital manufacturing, knowledge-based manufacturing, and networked manufacturing, emphasized by the European initiative Manufuture, two additional requirements, i.e., the real-timeness and cooperativeness of production structures are also outlined in the paper, which are of high and increasing importance. The paper also underlines the main requirements of customized mass production, with special emphasis on the real-time ability and cooperativeness. Main goals of a large-scale national industry-academia R&D project aimed at improving the performance of a production network that produces consumer goods in large quantities and variability are highlighted. An integrated approach is presented for planning the behavior of the system at network-, factory- and plant level, as well as for adapting various plans to real execution conditions.",
keywords = "Adaptive manufacturing, Cooperative production, Digital manufacturing, Mass customization, Real-time control",
author = "L. Monostori and J. V{\'a}ncza and T. Kis and B. K{\'a}d{\'a}r and G. Erdos and D. Karnok and P. Egri",
year = "2009",
doi = "10.3182/20090603-3-RU-2001.0588",
language = "English",
isbn = "9783902661432",
volume = "13",
pages = "720--727",
booktitle = "IFAC Proceedings Volumes (IFAC-PapersOnline)",
edition = "PART 1",

}

TY - GEN

T1 - Novel IT approaches and solutions towards real-time, cooperative enterprises

AU - Monostori, L.

AU - Váncza, J.

AU - Kis, T.

AU - Kádár, B.

AU - Erdos, G.

AU - Karnok, D.

AU - Egri, P.

PY - 2009

Y1 - 2009

N2 - In addition of the four main R&D directions, i.e., adaptive manufacturing, digital manufacturing, knowledge-based manufacturing, and networked manufacturing, emphasized by the European initiative Manufuture, two additional requirements, i.e., the real-timeness and cooperativeness of production structures are also outlined in the paper, which are of high and increasing importance. The paper also underlines the main requirements of customized mass production, with special emphasis on the real-time ability and cooperativeness. Main goals of a large-scale national industry-academia R&D project aimed at improving the performance of a production network that produces consumer goods in large quantities and variability are highlighted. An integrated approach is presented for planning the behavior of the system at network-, factory- and plant level, as well as for adapting various plans to real execution conditions.

AB - In addition of the four main R&D directions, i.e., adaptive manufacturing, digital manufacturing, knowledge-based manufacturing, and networked manufacturing, emphasized by the European initiative Manufuture, two additional requirements, i.e., the real-timeness and cooperativeness of production structures are also outlined in the paper, which are of high and increasing importance. The paper also underlines the main requirements of customized mass production, with special emphasis on the real-time ability and cooperativeness. Main goals of a large-scale national industry-academia R&D project aimed at improving the performance of a production network that produces consumer goods in large quantities and variability are highlighted. An integrated approach is presented for planning the behavior of the system at network-, factory- and plant level, as well as for adapting various plans to real execution conditions.

KW - Adaptive manufacturing

KW - Cooperative production

KW - Digital manufacturing

KW - Mass customization

KW - Real-time control

UR - http://www.scopus.com/inward/record.url?scp=79960930360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79960930360&partnerID=8YFLogxK

U2 - 10.3182/20090603-3-RU-2001.0588

DO - 10.3182/20090603-3-RU-2001.0588

M3 - Conference contribution

SN - 9783902661432

VL - 13

SP - 720

EP - 727

BT - IFAC Proceedings Volumes (IFAC-PapersOnline)

ER -