Networked control approaches for a nuclear power plant pressurizer subsystem ?

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper extends former results about the networked reference tracking control of a pressurizer in a pressurized water nuclear power plant. An L2-gain based method is used in a deterministic framework to compute the maximum allowable transmit intervals (MATIs) for the actually implemented dynamic inversion based controller that still guarantee the required performance. Furthermore, a stochastic linear quadratic regulator with a state estimator is also designed that can take packet losses into consideration. It is shown through the comparison that both methods are applicable for networked control but the LQ controller combined with a Kalman filter has better output variance properties.

Original languageEnglish
Title of host publication1st IFAC Workshop on Estimation and Control of Networked Systems, NecSys'09
Pages316-321
Number of pages6
EditionPART 1
DOIs
Publication statusPublished - Dec 1 2009
Event1st IFAC Workshop on Estimation and Control of Networked Systems, NecSys'09 - Venice, Italy
Duration: Sep 24 2009Sep 26 2009

Publication series

NameIFAC Proceedings Volumes (IFAC-PapersOnline)
NumberPART 1
Volume1
ISSN (Print)1474-6670

Other

Other1st IFAC Workshop on Estimation and Control of Networked Systems, NecSys'09
CountryItaly
CityVenice
Period9/24/099/26/09

    Fingerprint

Keywords

  • Dynamic inversion
  • LQG control
  • Networked control

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Szederkényi, G., Péni, T., Gáspár, P., & Bokor, J. (2009). Networked control approaches for a nuclear power plant pressurizer subsystem ? In 1st IFAC Workshop on Estimation and Control of Networked Systems, NecSys'09 (PART 1 ed., pp. 316-321). (IFAC Proceedings Volumes (IFAC-PapersOnline); Vol. 1, No. PART 1). https://doi.org/10.3182/20090924-3-IT-4005.0048