Monitorizarea proprietǎţilor de energie a modulelor fotovoltaice

Translated title of the contribution: Monitoring the energy properties of photovoltaic modules

István Haber, I. Farkas

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In the present paper, a heat flow network model based on the block oriented Matlab/Simulink model was implemented in LabView. The model is going to be validated with special equipment, which requires the meteorological parameters. Such parameters are the solar irradiation, the wind speed, the ambient temperature and the temperatures of solar cells built in the BP 275 type. To fulfill the research requirements, a meteorological station were built on the top of the PMMK main building, next to the PV modules. This station contains a Kipp & Zonen pyranometer, ThiessClima wind speed and wind direction sensor, and standard Pt1000 resistance thermometer. All sensors were connected to a National Instruments USB 6008 type data acquisition instrument which is programmed by LabView. The collected data's and the output of the performance model can be compared real-time.

Original languageUndefined/Unknown
Pages (from-to)13-18
Number of pages6
JournalEEA - Electrotehnica, Electronica, Automatica
Volume60
Issue number2
Publication statusPublished - 2012

Fingerprint

Monitoring
Thermometers
Sensors
Data acquisition
Solar cells
Irradiation
Heat transfer
Temperature

Keywords

  • Data aquisition
  • Measurement
  • Meteorological station
  • PV

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Monitorizarea proprietǎţilor de energie a modulelor fotovoltaice. / Haber, István; Farkas, I.

In: EEA - Electrotehnica, Electronica, Automatica, Vol. 60, No. 2, 2012, p. 13-18.

Research output: Contribution to journalArticle

@article{2edc20b7148f4a38be4ad98f40aadbc9,
title = "Monitorizarea proprietǎţilor de energie a modulelor fotovoltaice",
abstract = "In the present paper, a heat flow network model based on the block oriented Matlab/Simulink model was implemented in LabView. The model is going to be validated with special equipment, which requires the meteorological parameters. Such parameters are the solar irradiation, the wind speed, the ambient temperature and the temperatures of solar cells built in the BP 275 type. To fulfill the research requirements, a meteorological station were built on the top of the PMMK main building, next to the PV modules. This station contains a Kipp & Zonen pyranometer, ThiessClima wind speed and wind direction sensor, and standard Pt1000 resistance thermometer. All sensors were connected to a National Instruments USB 6008 type data acquisition instrument which is programmed by LabView. The collected data's and the output of the performance model can be compared real-time.",
keywords = "Data aquisition, Measurement, Meteorological station, PV",
author = "Istv{\'a}n Haber and I. Farkas",
year = "2012",
language = "Undefined/Unknown",
volume = "60",
pages = "13--18",
journal = "EEA - Electrotehnica, Electronica, Automatica",
issn = "1582-5175",
publisher = "Institutul de Cercetare si Proiectare pentru Electrotehnica",
number = "2",

}

TY - JOUR

T1 - Monitorizarea proprietǎţilor de energie a modulelor fotovoltaice

AU - Haber, István

AU - Farkas, I.

PY - 2012

Y1 - 2012

N2 - In the present paper, a heat flow network model based on the block oriented Matlab/Simulink model was implemented in LabView. The model is going to be validated with special equipment, which requires the meteorological parameters. Such parameters are the solar irradiation, the wind speed, the ambient temperature and the temperatures of solar cells built in the BP 275 type. To fulfill the research requirements, a meteorological station were built on the top of the PMMK main building, next to the PV modules. This station contains a Kipp & Zonen pyranometer, ThiessClima wind speed and wind direction sensor, and standard Pt1000 resistance thermometer. All sensors were connected to a National Instruments USB 6008 type data acquisition instrument which is programmed by LabView. The collected data's and the output of the performance model can be compared real-time.

AB - In the present paper, a heat flow network model based on the block oriented Matlab/Simulink model was implemented in LabView. The model is going to be validated with special equipment, which requires the meteorological parameters. Such parameters are the solar irradiation, the wind speed, the ambient temperature and the temperatures of solar cells built in the BP 275 type. To fulfill the research requirements, a meteorological station were built on the top of the PMMK main building, next to the PV modules. This station contains a Kipp & Zonen pyranometer, ThiessClima wind speed and wind direction sensor, and standard Pt1000 resistance thermometer. All sensors were connected to a National Instruments USB 6008 type data acquisition instrument which is programmed by LabView. The collected data's and the output of the performance model can be compared real-time.

KW - Data aquisition

KW - Measurement

KW - Meteorological station

KW - PV

UR - http://www.scopus.com/inward/record.url?scp=84940751566&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84940751566&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84940751566

VL - 60

SP - 13

EP - 18

JO - EEA - Electrotehnica, Electronica, Automatica

JF - EEA - Electrotehnica, Electronica, Automatica

SN - 1582-5175

IS - 2

ER -