Hatoanyag-felszabadulas modositasa kulonbozo gyogyszertechnologiai eljarasokkal

Translated title of the contribution: Modification of drug release with application of pharmaceutical technological methods

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Pharmaceutical technological methods, which enable the development of controlled release, prolonged action solid oral dosage forms, are of great importance. The purpose of our study was to apply these methods and evaluate the prepared samples. The first type of the samples were individually coated separated particles, prepared by mixing with lubricant to built up a lubricant film layer on the surface of the drug crystals. The next group of the samples were separately coated particles - wall material was wax - prepared using the following two technologies: fluidisation atomisation process and hot-melt coating. The third group of the samples was the matrix type, where the core material was mixed into the molten mass of the thermosoftening natural coating material or into some synthetic polymer film material. In some cases several surface active agents were added to the molten mixture to achieve a modification in the drug release process and the examined parameters of the samples. For the comparative evaluation of the prepared dosage forms drug release determination and kinetical analysis of the process were maintainly used. The surface morphology was examined on the base of scanning electronmicroscopic and optical microscopic studies. Among the physical and physico-chemical studies particle size analysis was carried out and dynamic contact angles of the solid samples as well as the surface tension decreasing effect was measured to determine the modifying properties of surface active excipients. To sum up, our results demonstrate that the economical and environmentally acceptable melt coating technology was justified as applicable advantegously in a large number of cases for the development of controlled release devices of highly watersoluble drug, even the medical substance is an organic compound having adjustable thermostability.

Original languageHungarian
Pages (from-to)176-180
Number of pages5
JournalActa Pharmaceutica Hungarica
Volume69
Issue number4
Publication statusPublished - 1999

Fingerprint

Lubricants
Dosage Forms
Pharmaceutical Preparations
Technology
Surface Tension
Surface Properties
Waxes
Excipients
Particle Size
Surface-Active Agents
Polymers
Equipment and Supplies
Drug Liberation

ASJC Scopus subject areas

  • Pharmaceutical Science

Cite this

Hatoanyag-felszabadulas modositasa kulonbozo gyogyszertechnologiai eljarasokkal. / Judit, D.; Antal, I.; Zelkó, R.; Rácz, I.

In: Acta Pharmaceutica Hungarica, Vol. 69, No. 4, 1999, p. 176-180.

Research output: Contribution to journalArticle

@article{6cc0416adc454710a920db0a463d9f39,
title = "Hatoanyag-felszabadulas modositasa kulonbozo gyogyszertechnologiai eljarasokkal",
abstract = "Pharmaceutical technological methods, which enable the development of controlled release, prolonged action solid oral dosage forms, are of great importance. The purpose of our study was to apply these methods and evaluate the prepared samples. The first type of the samples were individually coated separated particles, prepared by mixing with lubricant to built up a lubricant film layer on the surface of the drug crystals. The next group of the samples were separately coated particles - wall material was wax - prepared using the following two technologies: fluidisation atomisation process and hot-melt coating. The third group of the samples was the matrix type, where the core material was mixed into the molten mass of the thermosoftening natural coating material or into some synthetic polymer film material. In some cases several surface active agents were added to the molten mixture to achieve a modification in the drug release process and the examined parameters of the samples. For the comparative evaluation of the prepared dosage forms drug release determination and kinetical analysis of the process were maintainly used. The surface morphology was examined on the base of scanning electronmicroscopic and optical microscopic studies. Among the physical and physico-chemical studies particle size analysis was carried out and dynamic contact angles of the solid samples as well as the surface tension decreasing effect was measured to determine the modifying properties of surface active excipients. To sum up, our results demonstrate that the economical and environmentally acceptable melt coating technology was justified as applicable advantegously in a large number of cases for the development of controlled release devices of highly watersoluble drug, even the medical substance is an organic compound having adjustable thermostability.",
author = "D. Judit and I. Antal and R. Zelk{\'o} and I. R{\'a}cz",
year = "1999",
language = "Hungarian",
volume = "69",
pages = "176--180",
journal = "Acta Pharmaceutica Hungarica",
issn = "0001-6659",
publisher = "Magyar Gyogyszereszeti Tarsasag",
number = "4",

}

TY - JOUR

T1 - Hatoanyag-felszabadulas modositasa kulonbozo gyogyszertechnologiai eljarasokkal

AU - Judit, D.

AU - Antal, I.

AU - Zelkó, R.

AU - Rácz, I.

PY - 1999

Y1 - 1999

N2 - Pharmaceutical technological methods, which enable the development of controlled release, prolonged action solid oral dosage forms, are of great importance. The purpose of our study was to apply these methods and evaluate the prepared samples. The first type of the samples were individually coated separated particles, prepared by mixing with lubricant to built up a lubricant film layer on the surface of the drug crystals. The next group of the samples were separately coated particles - wall material was wax - prepared using the following two technologies: fluidisation atomisation process and hot-melt coating. The third group of the samples was the matrix type, where the core material was mixed into the molten mass of the thermosoftening natural coating material or into some synthetic polymer film material. In some cases several surface active agents were added to the molten mixture to achieve a modification in the drug release process and the examined parameters of the samples. For the comparative evaluation of the prepared dosage forms drug release determination and kinetical analysis of the process were maintainly used. The surface morphology was examined on the base of scanning electronmicroscopic and optical microscopic studies. Among the physical and physico-chemical studies particle size analysis was carried out and dynamic contact angles of the solid samples as well as the surface tension decreasing effect was measured to determine the modifying properties of surface active excipients. To sum up, our results demonstrate that the economical and environmentally acceptable melt coating technology was justified as applicable advantegously in a large number of cases for the development of controlled release devices of highly watersoluble drug, even the medical substance is an organic compound having adjustable thermostability.

AB - Pharmaceutical technological methods, which enable the development of controlled release, prolonged action solid oral dosage forms, are of great importance. The purpose of our study was to apply these methods and evaluate the prepared samples. The first type of the samples were individually coated separated particles, prepared by mixing with lubricant to built up a lubricant film layer on the surface of the drug crystals. The next group of the samples were separately coated particles - wall material was wax - prepared using the following two technologies: fluidisation atomisation process and hot-melt coating. The third group of the samples was the matrix type, where the core material was mixed into the molten mass of the thermosoftening natural coating material or into some synthetic polymer film material. In some cases several surface active agents were added to the molten mixture to achieve a modification in the drug release process and the examined parameters of the samples. For the comparative evaluation of the prepared dosage forms drug release determination and kinetical analysis of the process were maintainly used. The surface morphology was examined on the base of scanning electronmicroscopic and optical microscopic studies. Among the physical and physico-chemical studies particle size analysis was carried out and dynamic contact angles of the solid samples as well as the surface tension decreasing effect was measured to determine the modifying properties of surface active excipients. To sum up, our results demonstrate that the economical and environmentally acceptable melt coating technology was justified as applicable advantegously in a large number of cases for the development of controlled release devices of highly watersoluble drug, even the medical substance is an organic compound having adjustable thermostability.

UR - http://www.scopus.com/inward/record.url?scp=0033195881&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033195881&partnerID=8YFLogxK

M3 - Article

VL - 69

SP - 176

EP - 180

JO - Acta Pharmaceutica Hungarica

JF - Acta Pharmaceutica Hungarica

SN - 0001-6659

IS - 4

ER -