Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys

V. Rontó, J. Sólyom, A. A. Kovács, P. Pekker, I. Dódony

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

There are no data about the equilibrium phases in the Cu-Hf-Ti system, in the Cu-rich corner which is a glass former region. Phases and solidifying microstructures were examined in the master alloy (cooling rate: ~150 K/s) and in slowly cooled (5 K/min) samples in case of different compositions. Unknown ternary phases were found by SEM and XRD analysis and one of them with the highest Ti content could be identified by TEM study.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages266-271
Number of pages6
Volume729
DOIs
Publication statusPublished - 2013
Event8th Hungarian Conference on Materials Science - Balatonkenese, Hungary
Duration: Oct 9 2011Oct 11 2011

Publication series

NameMaterials Science Forum
Volume729
ISSN (Print)02555476

Other

Other8th Hungarian Conference on Materials Science
CountryHungary
CityBalatonkenese
Period10/9/1110/11/11

Fingerprint

Phase equilibria
Transmission electron microscopy
Cooling
cooling
Glass
transmission electron microscopy
microstructure
Microstructure
Scanning electron microscopy
scanning electron microscopy
glass
Chemical analysis

Keywords

  • Cu-hf-ti alloy system
  • Dsc measurements
  • Phase analysis
  • Solidification behaviour

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Rontó, V., Sólyom, J., Kovács, A. A., Pekker, P., & Dódony, I. (2013). Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys. In Materials Science Forum (Vol. 729, pp. 266-271). (Materials Science Forum; Vol. 729). https://doi.org/10.4028/www.scientific.net/MSF.729.266

Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys. / Rontó, V.; Sólyom, J.; Kovács, A. A.; Pekker, P.; Dódony, I.

Materials Science Forum. Vol. 729 2013. p. 266-271 (Materials Science Forum; Vol. 729).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rontó, V, Sólyom, J, Kovács, AA, Pekker, P & Dódony, I 2013, Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys. in Materials Science Forum. vol. 729, Materials Science Forum, vol. 729, pp. 266-271, 8th Hungarian Conference on Materials Science, Balatonkenese, Hungary, 10/9/11. https://doi.org/10.4028/www.scientific.net/MSF.729.266
Rontó V, Sólyom J, Kovács AA, Pekker P, Dódony I. Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys. In Materials Science Forum. Vol. 729. 2013. p. 266-271. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.729.266
Rontó, V. ; Sólyom, J. ; Kovács, A. A. ; Pekker, P. ; Dódony, I. / Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys. Materials Science Forum. Vol. 729 2013. pp. 266-271 (Materials Science Forum).
@inproceedings{8f80f6ee1d444c99ba889c88a16a530f,
title = "Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys",
abstract = "There are no data about the equilibrium phases in the Cu-Hf-Ti system, in the Cu-rich corner which is a glass former region. Phases and solidifying microstructures were examined in the master alloy (cooling rate: ~150 K/s) and in slowly cooled (5 K/min) samples in case of different compositions. Unknown ternary phases were found by SEM and XRD analysis and one of them with the highest Ti content could be identified by TEM study.",
keywords = "Cu-hf-ti alloy system, Dsc measurements, Phase analysis, Solidification behaviour",
author = "V. Ront{\'o} and J. S{\'o}lyom and Kov{\'a}cs, {A. A.} and P. Pekker and I. D{\'o}dony",
year = "2013",
doi = "10.4028/www.scientific.net/MSF.729.266",
language = "English",
isbn = "9783037854914",
volume = "729",
series = "Materials Science Forum",
pages = "266--271",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Microstructure and phase analysis by TEM in Cu-Hf-Ti alloys

AU - Rontó, V.

AU - Sólyom, J.

AU - Kovács, A. A.

AU - Pekker, P.

AU - Dódony, I.

PY - 2013

Y1 - 2013

N2 - There are no data about the equilibrium phases in the Cu-Hf-Ti system, in the Cu-rich corner which is a glass former region. Phases and solidifying microstructures were examined in the master alloy (cooling rate: ~150 K/s) and in slowly cooled (5 K/min) samples in case of different compositions. Unknown ternary phases were found by SEM and XRD analysis and one of them with the highest Ti content could be identified by TEM study.

AB - There are no data about the equilibrium phases in the Cu-Hf-Ti system, in the Cu-rich corner which is a glass former region. Phases and solidifying microstructures were examined in the master alloy (cooling rate: ~150 K/s) and in slowly cooled (5 K/min) samples in case of different compositions. Unknown ternary phases were found by SEM and XRD analysis and one of them with the highest Ti content could be identified by TEM study.

KW - Cu-hf-ti alloy system

KW - Dsc measurements

KW - Phase analysis

KW - Solidification behaviour

UR - http://www.scopus.com/inward/record.url?scp=84870764061&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870764061&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.729.266

DO - 10.4028/www.scientific.net/MSF.729.266

M3 - Conference contribution

SN - 9783037854914

VL - 729

T3 - Materials Science Forum

SP - 266

EP - 271

BT - Materials Science Forum

ER -