Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel

J. Kundrák, László Ráczkövi, Károly Gyáni

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Abstract

This article presents the examination of cutting performance of a low CBN content cutting tool in the case of hard turning of 100Cr6 hardened bearing steel. One of the indicators of cutting performance is the wear rate, which can be calculated as a ratio of a measurable geometric parameter of a wear form and some technological parameters (cutting time, cutting length or removed material volume). The wear of CBN cutting tools is characterized by the extent of flank wear hence the wear rates related to cutting time and removed material volume are calculated based on the measured flank wear during the cutting experiments. The alteration of wear rates as a function of flank wear and cutting speed was examined.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages333-338
Number of pages6
Volume474
ISBN (Print)9783037859445
DOIs
Publication statusPublished - 2014

Publication series

NameApplied Mechanics and Materials
Volume474
ISSN (Print)16609336
ISSN (Electronic)16627482

Fingerprint

Bearings (structural)
Cutting tools
Machining
Wear of materials
Steel

Keywords

  • Hard turning
  • Tool wear
  • Wear rate

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kundrák, J., Ráczkövi, L., & Gyáni, K. (2014). Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel. In Applied Mechanics and Materials (Vol. 474, pp. 333-338). (Applied Mechanics and Materials; Vol. 474). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.474.333

Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel. / Kundrák, J.; Ráczkövi, László; Gyáni, Károly.

Applied Mechanics and Materials. Vol. 474 Trans Tech Publications Ltd, 2014. p. 333-338 (Applied Mechanics and Materials; Vol. 474).

Research output: Chapter in Book/Report/Conference proceedingChapter

Kundrák, J, Ráczkövi, L & Gyáni, K 2014, Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel. in Applied Mechanics and Materials. vol. 474, Applied Mechanics and Materials, vol. 474, Trans Tech Publications Ltd, pp. 333-338. https://doi.org/10.4028/www.scientific.net/AMM.474.333
Kundrák J, Ráczkövi L, Gyáni K. Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel. In Applied Mechanics and Materials. Vol. 474. Trans Tech Publications Ltd. 2014. p. 333-338. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.474.333
Kundrák, J. ; Ráczkövi, László ; Gyáni, Károly. / Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel. Applied Mechanics and Materials. Vol. 474 Trans Tech Publications Ltd, 2014. pp. 333-338 (Applied Mechanics and Materials).
@inbook{b543450c88f74291b820bb3aeb98d3fe,
title = "Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel",
abstract = "This article presents the examination of cutting performance of a low CBN content cutting tool in the case of hard turning of 100Cr6 hardened bearing steel. One of the indicators of cutting performance is the wear rate, which can be calculated as a ratio of a measurable geometric parameter of a wear form and some technological parameters (cutting time, cutting length or removed material volume). The wear of CBN cutting tools is characterized by the extent of flank wear hence the wear rates related to cutting time and removed material volume are calculated based on the measured flank wear during the cutting experiments. The alteration of wear rates as a function of flank wear and cutting speed was examined.",
keywords = "Hard turning, Tool wear, Wear rate",
author = "J. Kundr{\'a}k and L{\'a}szl{\'o} R{\'a}czk{\"o}vi and K{\'a}roly Gy{\'a}ni",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.474.333",
language = "English",
isbn = "9783037859445",
volume = "474",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "333--338",
booktitle = "Applied Mechanics and Materials",

}

TY - CHAP

T1 - Machining performance of CBN cutting tools for hard turning of 100Cr6 bearing steel

AU - Kundrák, J.

AU - Ráczkövi, László

AU - Gyáni, Károly

PY - 2014

Y1 - 2014

N2 - This article presents the examination of cutting performance of a low CBN content cutting tool in the case of hard turning of 100Cr6 hardened bearing steel. One of the indicators of cutting performance is the wear rate, which can be calculated as a ratio of a measurable geometric parameter of a wear form and some technological parameters (cutting time, cutting length or removed material volume). The wear of CBN cutting tools is characterized by the extent of flank wear hence the wear rates related to cutting time and removed material volume are calculated based on the measured flank wear during the cutting experiments. The alteration of wear rates as a function of flank wear and cutting speed was examined.

AB - This article presents the examination of cutting performance of a low CBN content cutting tool in the case of hard turning of 100Cr6 hardened bearing steel. One of the indicators of cutting performance is the wear rate, which can be calculated as a ratio of a measurable geometric parameter of a wear form and some technological parameters (cutting time, cutting length or removed material volume). The wear of CBN cutting tools is characterized by the extent of flank wear hence the wear rates related to cutting time and removed material volume are calculated based on the measured flank wear during the cutting experiments. The alteration of wear rates as a function of flank wear and cutting speed was examined.

KW - Hard turning

KW - Tool wear

KW - Wear rate

UR - http://www.scopus.com/inward/record.url?scp=84892776311&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84892776311&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.474.333

DO - 10.4028/www.scientific.net/AMM.474.333

M3 - Chapter

AN - SCOPUS:84892776311

SN - 9783037859445

VL - 474

T3 - Applied Mechanics and Materials

SP - 333

EP - 338

BT - Applied Mechanics and Materials

PB - Trans Tech Publications Ltd

ER -