LOAD AND STRESS DISTRIBUTIONS IN SPUR AND HELICAL GEARS.

Research output: Contribution to journalArticle

27 Citations (Scopus)

Abstract

A method for the determination of load and stress distributions along the contact lines of the instantaneously engaged teeth of spur and helical gears is represented in this paper. The calculation includes the tooth profile modifications and crownings, manufacturing and alignment errors of gears, tooth deflections, local contact deformations of teeth, gear body bending and torsion, and deflections of supporting shafts. The influence of gear parameters on load and stress distributions is discussed. On the basis of the obtained results, by regression analysis, equations are derived for the calculation of load and stress distribution factors.

Original languageEnglish
Pages (from-to)197-202
Number of pages6
JournalTRANS. ASME J. MECH., TRANSM., & AUTOM. DES.
Volume110
Issue number2
Publication statusPublished - Jun 1988

Fingerprint

Helical gears
Spur gears
Gear teeth
Stress concentration
Loads (forces)
Bending (deformation)
Regression analysis
Torsional stress
Gears

ASJC Scopus subject areas

  • Engineering(all)

Cite this

LOAD AND STRESS DISTRIBUTIONS IN SPUR AND HELICAL GEARS. / Simon, V.

In: TRANS. ASME J. MECH., TRANSM., & AUTOM. DES., Vol. 110, No. 2, 06.1988, p. 197-202.

Research output: Contribution to journalArticle

@article{18be450f6e3d479f962479946454ff72,
title = "LOAD AND STRESS DISTRIBUTIONS IN SPUR AND HELICAL GEARS.",
abstract = "A method for the determination of load and stress distributions along the contact lines of the instantaneously engaged teeth of spur and helical gears is represented in this paper. The calculation includes the tooth profile modifications and crownings, manufacturing and alignment errors of gears, tooth deflections, local contact deformations of teeth, gear body bending and torsion, and deflections of supporting shafts. The influence of gear parameters on load and stress distributions is discussed. On the basis of the obtained results, by regression analysis, equations are derived for the calculation of load and stress distribution factors.",
author = "V. Simon",
year = "1988",
month = "6",
language = "English",
volume = "110",
pages = "197--202",
journal = "Journal of Mechanisms, Transmissions, and Automation in Design",
issn = "1050-0472",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "2",

}

TY - JOUR

T1 - LOAD AND STRESS DISTRIBUTIONS IN SPUR AND HELICAL GEARS.

AU - Simon, V.

PY - 1988/6

Y1 - 1988/6

N2 - A method for the determination of load and stress distributions along the contact lines of the instantaneously engaged teeth of spur and helical gears is represented in this paper. The calculation includes the tooth profile modifications and crownings, manufacturing and alignment errors of gears, tooth deflections, local contact deformations of teeth, gear body bending and torsion, and deflections of supporting shafts. The influence of gear parameters on load and stress distributions is discussed. On the basis of the obtained results, by regression analysis, equations are derived for the calculation of load and stress distribution factors.

AB - A method for the determination of load and stress distributions along the contact lines of the instantaneously engaged teeth of spur and helical gears is represented in this paper. The calculation includes the tooth profile modifications and crownings, manufacturing and alignment errors of gears, tooth deflections, local contact deformations of teeth, gear body bending and torsion, and deflections of supporting shafts. The influence of gear parameters on load and stress distributions is discussed. On the basis of the obtained results, by regression analysis, equations are derived for the calculation of load and stress distribution factors.

UR - http://www.scopus.com/inward/record.url?scp=0024031701&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024031701&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0024031701

VL - 110

SP - 197

EP - 202

JO - Journal of Mechanisms, Transmissions, and Automation in Design

JF - Journal of Mechanisms, Transmissions, and Automation in Design

SN - 1050-0472

IS - 2

ER -