Investigation of the topography of machined surfaces

Csaba Felhő, J. Kundrák

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The modern investigation of the topography of cut surfaces is nowadays usually performed by three-dimensional surface roughness indexes. The goal of this work was to determine a theoretical roughness index for face milled surfaces. The calculated values were compared with real surface roughness data obtained by performing cutting experiments and the relation was determined between these two datasets.

Original languageEnglish
Pages (from-to)412-417
Number of pages6
JournalApplied Mechanics and Materials
Volume693
DOIs
Publication statusPublished - 2014

Fingerprint

Topography
Surface roughness
Experiments

Keywords

  • Face milling
  • Surface roughness
  • Theoretical roughness

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Investigation of the topography of machined surfaces. / Felhő, Csaba; Kundrák, J.

In: Applied Mechanics and Materials, Vol. 693, 2014, p. 412-417.

Research output: Contribution to journalArticle

@article{ccef86afaec44303bab3451ea774241b,
title = "Investigation of the topography of machined surfaces",
abstract = "The modern investigation of the topography of cut surfaces is nowadays usually performed by three-dimensional surface roughness indexes. The goal of this work was to determine a theoretical roughness index for face milled surfaces. The calculated values were compared with real surface roughness data obtained by performing cutting experiments and the relation was determined between these two datasets.",
keywords = "Face milling, Surface roughness, Theoretical roughness",
author = "Csaba Felhő and J. Kundr{\'a}k",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.693.412",
language = "English",
volume = "693",
pages = "412--417",
journal = "Applied Mechanics and Materials",
issn = "1660-9336",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Investigation of the topography of machined surfaces

AU - Felhő, Csaba

AU - Kundrák, J.

PY - 2014

Y1 - 2014

N2 - The modern investigation of the topography of cut surfaces is nowadays usually performed by three-dimensional surface roughness indexes. The goal of this work was to determine a theoretical roughness index for face milled surfaces. The calculated values were compared with real surface roughness data obtained by performing cutting experiments and the relation was determined between these two datasets.

AB - The modern investigation of the topography of cut surfaces is nowadays usually performed by three-dimensional surface roughness indexes. The goal of this work was to determine a theoretical roughness index for face milled surfaces. The calculated values were compared with real surface roughness data obtained by performing cutting experiments and the relation was determined between these two datasets.

KW - Face milling

KW - Surface roughness

KW - Theoretical roughness

UR - http://www.scopus.com/inward/record.url?scp=84929440250&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929440250&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.693.412

DO - 10.4028/www.scientific.net/AMM.693.412

M3 - Article

AN - SCOPUS:84929440250

VL - 693

SP - 412

EP - 417

JO - Applied Mechanics and Materials

JF - Applied Mechanics and Materials

SN - 1660-9336

ER -