Investigation of the topography of face milled surfaces

János Kundrák, Csaba Felhő

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Abstract

Effects of the changing of cutting on the two- and three-dimensional roughness parameters of surfaces machined by face milling are investigated in the paper. The focus is on how the changing of the ratio of the feed and depth of cut affects the generated surface topography and its parameters in the case of constant undeformed uncut chip cross-section. Additionally, it is demonstrated how setting errors of individual inserts affect the roughness parameters of machined surfaces.

Original languageEnglish
Title of host publicationMaterials Science Forum
PublisherTrans Tech Publications Ltd
Pages78-83
Number of pages6
DOIs
Publication statusPublished - Jan 1 2018

Publication series

NameMaterials Science Forum
Volume919
ISSN (Print)0255-5476

Fingerprint

Topography
topography
Surface roughness
Surface topography
roughness
inserts
chips
cross sections

Keywords

  • Face milling
  • Surface roughness

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Kundrák, J., & Felhő, C. (2018). Investigation of the topography of face milled surfaces. In Materials Science Forum (pp. 78-83). (Materials Science Forum; Vol. 919). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.919.78

Investigation of the topography of face milled surfaces. / Kundrák, János; Felhő, Csaba.

Materials Science Forum. Trans Tech Publications Ltd, 2018. p. 78-83 (Materials Science Forum; Vol. 919).

Research output: Chapter in Book/Report/Conference proceedingChapter

Kundrák, J & Felhő, C 2018, Investigation of the topography of face milled surfaces. in Materials Science Forum. Materials Science Forum, vol. 919, Trans Tech Publications Ltd, pp. 78-83. https://doi.org/10.4028/www.scientific.net/MSF.919.78
Kundrák J, Felhő C. Investigation of the topography of face milled surfaces. In Materials Science Forum. Trans Tech Publications Ltd. 2018. p. 78-83. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.919.78
Kundrák, János ; Felhő, Csaba. / Investigation of the topography of face milled surfaces. Materials Science Forum. Trans Tech Publications Ltd, 2018. pp. 78-83 (Materials Science Forum).
@inbook{1950c04604d144fc9fe38fa9ca4e428f,
title = "Investigation of the topography of face milled surfaces",
abstract = "Effects of the changing of cutting on the two- and three-dimensional roughness parameters of surfaces machined by face milling are investigated in the paper. The focus is on how the changing of the ratio of the feed and depth of cut affects the generated surface topography and its parameters in the case of constant undeformed uncut chip cross-section. Additionally, it is demonstrated how setting errors of individual inserts affect the roughness parameters of machined surfaces.",
keywords = "Face milling, Surface roughness",
author = "J{\'a}nos Kundr{\'a}k and Csaba Felhő",
year = "2018",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/MSF.919.78",
language = "English",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "78--83",
booktitle = "Materials Science Forum",

}

TY - CHAP

T1 - Investigation of the topography of face milled surfaces

AU - Kundrák, János

AU - Felhő, Csaba

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Effects of the changing of cutting on the two- and three-dimensional roughness parameters of surfaces machined by face milling are investigated in the paper. The focus is on how the changing of the ratio of the feed and depth of cut affects the generated surface topography and its parameters in the case of constant undeformed uncut chip cross-section. Additionally, it is demonstrated how setting errors of individual inserts affect the roughness parameters of machined surfaces.

AB - Effects of the changing of cutting on the two- and three-dimensional roughness parameters of surfaces machined by face milling are investigated in the paper. The focus is on how the changing of the ratio of the feed and depth of cut affects the generated surface topography and its parameters in the case of constant undeformed uncut chip cross-section. Additionally, it is demonstrated how setting errors of individual inserts affect the roughness parameters of machined surfaces.

KW - Face milling

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=85045443578&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85045443578&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.919.78

DO - 10.4028/www.scientific.net/MSF.919.78

M3 - Chapter

AN - SCOPUS:85045443578

T3 - Materials Science Forum

SP - 78

EP - 83

BT - Materials Science Forum

PB - Trans Tech Publications Ltd

ER -