Investigation of the thermal and structural behaviour of diclofenac sodium-sugar ester surfactant systems

A. Szuts, M. Sorrenti, L. Catenacci, G. Bettinetti, P. Szabó-Révész

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

Sugar esters (SEs) have a wide range of hydrophilic-lipophilic balance (HLB) values (1-16) and hence can be applied as surfactants or as solubility or penetration enhancers. They can be used for hot melt technology and solvent method which are frequently applied techniques to preparation of solid dispersions. In this study drug-SE products were prepared by physical mixing, melt technology and solvent methods. The products were investigated by DSC, X-ray powder diffraction and dissolution tests. Diclofenac sodium (DS) as model drug and two SEs, P1670 (HLB=16) and S970 (HLB=9) were used for the preparation of the products. DSC curves revealed considerable melting range and enthalpy decreases for the DS-SE products. The dissolved drug molecules broke down the structures of the SEs but were not built into the crystalline phase of the carrier. The melt technology led to a solid dispersion while in the case of the solvent methods the DS was in molecularly dispersed form which resulted in faster dissolution. The drug release was influenced by the structures resulting from the various treatments, by the HLB and by the gel-forming behaviour of the SEs.

Original languageEnglish
Pages (from-to)885-890
Number of pages6
JournalJournal of Thermal Analysis and Calorimetry
Volume95
Issue number3
DOIs
Publication statusPublished - Mar 2009

Fingerprint

Diclofenac
sugars
Surface-Active Agents
Sugars
esters
Esters
surfactants
sodium
drugs
products
Pharmaceutical Preparations
dissolving
Dissolution
preparation
Dispersions
X ray powder diffraction
Hot Temperature
Enthalpy
Melting
penetration

Keywords

  • Drug release
  • DSC
  • Solid dispersion
  • Sugar ester
  • X-ray

ASJC Scopus subject areas

  • Physical and Theoretical Chemistry
  • Condensed Matter Physics

Cite this

Investigation of the thermal and structural behaviour of diclofenac sodium-sugar ester surfactant systems. / Szuts, A.; Sorrenti, M.; Catenacci, L.; Bettinetti, G.; Szabó-Révész, P.

In: Journal of Thermal Analysis and Calorimetry, Vol. 95, No. 3, 03.2009, p. 885-890.

Research output: Contribution to journalArticle

@article{3755583057e04f87afa4b8ec3a5f8517,
title = "Investigation of the thermal and structural behaviour of diclofenac sodium-sugar ester surfactant systems",
abstract = "Sugar esters (SEs) have a wide range of hydrophilic-lipophilic balance (HLB) values (1-16) and hence can be applied as surfactants or as solubility or penetration enhancers. They can be used for hot melt technology and solvent method which are frequently applied techniques to preparation of solid dispersions. In this study drug-SE products were prepared by physical mixing, melt technology and solvent methods. The products were investigated by DSC, X-ray powder diffraction and dissolution tests. Diclofenac sodium (DS) as model drug and two SEs, P1670 (HLB=16) and S970 (HLB=9) were used for the preparation of the products. DSC curves revealed considerable melting range and enthalpy decreases for the DS-SE products. The dissolved drug molecules broke down the structures of the SEs but were not built into the crystalline phase of the carrier. The melt technology led to a solid dispersion while in the case of the solvent methods the DS was in molecularly dispersed form which resulted in faster dissolution. The drug release was influenced by the structures resulting from the various treatments, by the HLB and by the gel-forming behaviour of the SEs.",
keywords = "Drug release, DSC, Solid dispersion, Sugar ester, X-ray",
author = "A. Szuts and M. Sorrenti and L. Catenacci and G. Bettinetti and P. Szab{\'o}-R{\'e}v{\'e}sz",
year = "2009",
month = "3",
doi = "10.1007/s10973-008-9051-x",
language = "English",
volume = "95",
pages = "885--890",
journal = "Journal of Thermal Analysis and Calorimetry",
issn = "1388-6150",
publisher = "Springer Netherlands",
number = "3",

}

TY - JOUR

T1 - Investigation of the thermal and structural behaviour of diclofenac sodium-sugar ester surfactant systems

AU - Szuts, A.

AU - Sorrenti, M.

AU - Catenacci, L.

AU - Bettinetti, G.

AU - Szabó-Révész, P.

PY - 2009/3

Y1 - 2009/3

N2 - Sugar esters (SEs) have a wide range of hydrophilic-lipophilic balance (HLB) values (1-16) and hence can be applied as surfactants or as solubility or penetration enhancers. They can be used for hot melt technology and solvent method which are frequently applied techniques to preparation of solid dispersions. In this study drug-SE products were prepared by physical mixing, melt technology and solvent methods. The products were investigated by DSC, X-ray powder diffraction and dissolution tests. Diclofenac sodium (DS) as model drug and two SEs, P1670 (HLB=16) and S970 (HLB=9) were used for the preparation of the products. DSC curves revealed considerable melting range and enthalpy decreases for the DS-SE products. The dissolved drug molecules broke down the structures of the SEs but were not built into the crystalline phase of the carrier. The melt technology led to a solid dispersion while in the case of the solvent methods the DS was in molecularly dispersed form which resulted in faster dissolution. The drug release was influenced by the structures resulting from the various treatments, by the HLB and by the gel-forming behaviour of the SEs.

AB - Sugar esters (SEs) have a wide range of hydrophilic-lipophilic balance (HLB) values (1-16) and hence can be applied as surfactants or as solubility or penetration enhancers. They can be used for hot melt technology and solvent method which are frequently applied techniques to preparation of solid dispersions. In this study drug-SE products were prepared by physical mixing, melt technology and solvent methods. The products were investigated by DSC, X-ray powder diffraction and dissolution tests. Diclofenac sodium (DS) as model drug and two SEs, P1670 (HLB=16) and S970 (HLB=9) were used for the preparation of the products. DSC curves revealed considerable melting range and enthalpy decreases for the DS-SE products. The dissolved drug molecules broke down the structures of the SEs but were not built into the crystalline phase of the carrier. The melt technology led to a solid dispersion while in the case of the solvent methods the DS was in molecularly dispersed form which resulted in faster dissolution. The drug release was influenced by the structures resulting from the various treatments, by the HLB and by the gel-forming behaviour of the SEs.

KW - Drug release

KW - DSC

KW - Solid dispersion

KW - Sugar ester

KW - X-ray

UR - http://www.scopus.com/inward/record.url?scp=77951599798&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951599798&partnerID=8YFLogxK

U2 - 10.1007/s10973-008-9051-x

DO - 10.1007/s10973-008-9051-x

M3 - Article

VL - 95

SP - 885

EP - 890

JO - Journal of Thermal Analysis and Calorimetry

JF - Journal of Thermal Analysis and Calorimetry

SN - 1388-6150

IS - 3

ER -