Investigation of aluminium made by powder metallurgy by using the CPAA method

S. Takács, F. Ditrói, I. Mahunka

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Products of powder metallurgy made of aluminium were investigated by the CPAA method. The microstructure of the samples was supposed to be small spheres (granules) made from pure aluminium with an aluminium oxide layer on their surface. This oxide layer gives the bulk oxygen content of the product. The aim of this work was to determine the oxide layer thickness. The samples were irradiated by 3He2+ particles and the annihilation radiation of the produced 18F isotope was used for oxygen determination. The average diameter of the internal granules was known, so from the measured oxygen concentration it was possible to calculate the average thickness of the above mentioned oxide layer which was found to be 8.5 ± 3 nm.

Original languageEnglish
Pages (from-to)99-100
Number of pages2
JournalNuclear Inst. and Methods in Physics Research, B
Volume43
Issue number1
DOIs
Publication statusPublished - Aug 1989

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Instrumentation

Fingerprint Dive into the research topics of 'Investigation of aluminium made by powder metallurgy by using the CPAA method'. Together they form a unique fingerprint.

  • Cite this