Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie

Translated title of the contribution: Infra red analysis for process control in the pulp and paper industry

Herbert Furumoto, Uwe Lampe, H. Meixner, Christoph Roth

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Parameters important for process control in the pulp and paper industry, e.g. strength properties, can only be measured at much expense in the laboratory and are thus not available for immediate control or adjustment. With infra red analysis and modern software for assessment of the spectra, these parameters become available for fast on-line measurement. Almost all chemical and physical information on paper, pulp or the timber are contained in the infra red spectra. It is however not possible to make unambiguous connections between this information and the spectral bands, since these are generally very broad and often overlap. The relations between the chemical composition and the parameters, important for process control, are often insufficiently well known. By the application of an innovative evaluation of the spectra, it can be shown that it is possible to determine the paper and pulp strengths like breaking length, burst strength, CMT and others, directly from the spectra.

Original languageGerman
Pages (from-to)235-340
Number of pages106
JournalPapier
Volume53
Issue number4
Publication statusPublished - Apr 1999

Fingerprint

Paper and pulp industry
Pulp
Process control
Infrared radiation
Timber
Chemical analysis

ASJC Scopus subject areas

  • Chemical Engineering(all)

Cite this

Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie. / Furumoto, Herbert; Lampe, Uwe; Meixner, H.; Roth, Christoph.

In: Papier, Vol. 53, No. 4, 04.1999, p. 235-340.

Research output: Contribution to journalArticle

Furumoto, H, Lampe, U, Meixner, H & Roth, C 1999, 'Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie', Papier, vol. 53, no. 4, pp. 235-340.
Furumoto, Herbert ; Lampe, Uwe ; Meixner, H. ; Roth, Christoph. / Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie. In: Papier. 1999 ; Vol. 53, No. 4. pp. 235-340.
@article{33b55751c991498c937362b39a7b006c,
title = "Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie",
abstract = "Parameters important for process control in the pulp and paper industry, e.g. strength properties, can only be measured at much expense in the laboratory and are thus not available for immediate control or adjustment. With infra red analysis and modern software for assessment of the spectra, these parameters become available for fast on-line measurement. Almost all chemical and physical information on paper, pulp or the timber are contained in the infra red spectra. It is however not possible to make unambiguous connections between this information and the spectral bands, since these are generally very broad and often overlap. The relations between the chemical composition and the parameters, important for process control, are often insufficiently well known. By the application of an innovative evaluation of the spectra, it can be shown that it is possible to determine the paper and pulp strengths like breaking length, burst strength, CMT and others, directly from the spectra.",
author = "Herbert Furumoto and Uwe Lampe and H. Meixner and Christoph Roth",
year = "1999",
month = "4",
language = "German",
volume = "53",
pages = "235--340",
journal = "Papier",
issn = "0031-1340",
publisher = "DPW-Verlagsgesellschaft GmbH",
number = "4",

}

TY - JOUR

T1 - Infrarotanalyse fuer die Prozessfuehrung in der Zellstoff- und Papierindustrie

AU - Furumoto, Herbert

AU - Lampe, Uwe

AU - Meixner, H.

AU - Roth, Christoph

PY - 1999/4

Y1 - 1999/4

N2 - Parameters important for process control in the pulp and paper industry, e.g. strength properties, can only be measured at much expense in the laboratory and are thus not available for immediate control or adjustment. With infra red analysis and modern software for assessment of the spectra, these parameters become available for fast on-line measurement. Almost all chemical and physical information on paper, pulp or the timber are contained in the infra red spectra. It is however not possible to make unambiguous connections between this information and the spectral bands, since these are generally very broad and often overlap. The relations between the chemical composition and the parameters, important for process control, are often insufficiently well known. By the application of an innovative evaluation of the spectra, it can be shown that it is possible to determine the paper and pulp strengths like breaking length, burst strength, CMT and others, directly from the spectra.

AB - Parameters important for process control in the pulp and paper industry, e.g. strength properties, can only be measured at much expense in the laboratory and are thus not available for immediate control or adjustment. With infra red analysis and modern software for assessment of the spectra, these parameters become available for fast on-line measurement. Almost all chemical and physical information on paper, pulp or the timber are contained in the infra red spectra. It is however not possible to make unambiguous connections between this information and the spectral bands, since these are generally very broad and often overlap. The relations between the chemical composition and the parameters, important for process control, are often insufficiently well known. By the application of an innovative evaluation of the spectra, it can be shown that it is possible to determine the paper and pulp strengths like breaking length, burst strength, CMT and others, directly from the spectra.

UR - http://www.scopus.com/inward/record.url?scp=0033313551&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033313551&partnerID=8YFLogxK

M3 - Article

VL - 53

SP - 235

EP - 340

JO - Papier

JF - Papier

SN - 0031-1340

IS - 4

ER -