Indentation testing of MoSi2

M. Henžel, P. Zimovčák, J. Dusza, A. Juhász, J. Lendvai

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Indentation methods have been used for the study of the hardness and deformation characteristics MoSi2. Micro-nanoindentation tests at loads from 10 mN to 2000 mN were carried out using the depth-sensing method. Measurements of the microhardness using conventional Vickers method was carried out at loads of 500 mN, 1000 mN and 2000 mN. The Universal (Martens), Plastic and conventional Vickers hardness values were calculated at different indentation loads. Evident indentation load - size effect was found in both materials. According to the results, the pre-strain reduces the micro-nano hardness values, probably due to the activation of slip systems during the high-temperature deformation.

Original languageEnglish
Pages (from-to)288-291
Number of pages4
JournalKey Engineering Materials
Volume290
DOIs
Publication statusPublished - 2005

Fingerprint

Indentation
Testing
Nanohardness
Vickers hardness
Nanoindentation
Microhardness
Chemical activation
Hardness
Plastics
Temperature

Keywords

  • Hardness
  • Instrumented indentation
  • Molybdenum disilicide

ASJC Scopus subject areas

  • Ceramics and Composites
  • Chemical Engineering (miscellaneous)

Cite this

Indentation testing of MoSi2. / Henžel, M.; Zimovčák, P.; Dusza, J.; Juhász, A.; Lendvai, J.

In: Key Engineering Materials, Vol. 290, 2005, p. 288-291.

Research output: Contribution to journalArticle

Henžel, M. ; Zimovčák, P. ; Dusza, J. ; Juhász, A. ; Lendvai, J. / Indentation testing of MoSi2. In: Key Engineering Materials. 2005 ; Vol. 290. pp. 288-291.
@article{fb35070da3bf47ce8cb3ada86127a53e,
title = "Indentation testing of MoSi2",
abstract = "Indentation methods have been used for the study of the hardness and deformation characteristics MoSi2. Micro-nanoindentation tests at loads from 10 mN to 2000 mN were carried out using the depth-sensing method. Measurements of the microhardness using conventional Vickers method was carried out at loads of 500 mN, 1000 mN and 2000 mN. The Universal (Martens), Plastic and conventional Vickers hardness values were calculated at different indentation loads. Evident indentation load - size effect was found in both materials. According to the results, the pre-strain reduces the micro-nano hardness values, probably due to the activation of slip systems during the high-temperature deformation.",
keywords = "Hardness, Instrumented indentation, Molybdenum disilicide",
author = "M. Henžel and P. Zimovč{\'a}k and J. Dusza and A. Juh{\'a}sz and J. Lendvai",
year = "2005",
doi = "10.4028/0-87849-973-3.288",
language = "English",
volume = "290",
pages = "288--291",
journal = "Key Engineering Materials",
issn = "1013-9826",
publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Indentation testing of MoSi2

AU - Henžel, M.

AU - Zimovčák, P.

AU - Dusza, J.

AU - Juhász, A.

AU - Lendvai, J.

PY - 2005

Y1 - 2005

N2 - Indentation methods have been used for the study of the hardness and deformation characteristics MoSi2. Micro-nanoindentation tests at loads from 10 mN to 2000 mN were carried out using the depth-sensing method. Measurements of the microhardness using conventional Vickers method was carried out at loads of 500 mN, 1000 mN and 2000 mN. The Universal (Martens), Plastic and conventional Vickers hardness values were calculated at different indentation loads. Evident indentation load - size effect was found in both materials. According to the results, the pre-strain reduces the micro-nano hardness values, probably due to the activation of slip systems during the high-temperature deformation.

AB - Indentation methods have been used for the study of the hardness and deformation characteristics MoSi2. Micro-nanoindentation tests at loads from 10 mN to 2000 mN were carried out using the depth-sensing method. Measurements of the microhardness using conventional Vickers method was carried out at loads of 500 mN, 1000 mN and 2000 mN. The Universal (Martens), Plastic and conventional Vickers hardness values were calculated at different indentation loads. Evident indentation load - size effect was found in both materials. According to the results, the pre-strain reduces the micro-nano hardness values, probably due to the activation of slip systems during the high-temperature deformation.

KW - Hardness

KW - Instrumented indentation

KW - Molybdenum disilicide

UR - http://www.scopus.com/inward/record.url?scp=34249822501&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34249822501&partnerID=8YFLogxK

U2 - 10.4028/0-87849-973-3.288

DO - 10.4028/0-87849-973-3.288

M3 - Article

VL - 290

SP - 288

EP - 291

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

ER -