Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model

Krisztian Kosi, Adrienn Dineva, J. Tar

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

In the control of chemical reactions the goal is to stabilize the control and take care of the design that has to integrate engineering aspects, as restrictions concerning the control signals, and the phenomenological limits that are not necessarily expressed by the reaction kinetic equations (e.g. no negative concentrations can be physically interpreted, and the reactants at the side of ingress cannot be purely extracted from the stirring tank reactor). In this paper the Robust Fixed Point Transformation (RFPT)-based adaptive approach was chosen for the control of an approximately modeled Brusselator reaction. The main reason of that was the fact that this methodology concentrates on the primary design goals as precise realization of the prescribed concentrations while the more conventional design methods that apply some Lyapunov function mainly concentrate on guaranteeing global stability without providing quasi-optimal solutions for the primary goals. Though the RFPT-based design has only local stability, its region of stability may be quite satisfactory for several practical applications. For controlling chemical reactions Continues Stirring Tank Reactors (CSTR) are widely used engines. The Busselator model will be represented in a CSTR in the simulations. In the present example two different reactants can be injected into the tank and the mixture is taken out in a single outlet. The necessary sampling frequency is a practically important design factor. It is shown that by the use of fractional order derivatives in the prescribed error relaxation considerably increases the necessary sampling time so it decreases the sampling frequency. This statement is substantiated by simulation results.

Original languageEnglish
Title of host publicationSAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings
Pages65-70
Number of pages6
DOIs
Publication statusPublished - 2013
Event2013 IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, SAMI 2013 - Herl'any, Slovakia
Duration: Jan 31 2013Feb 2 2013

Other

Other2013 IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, SAMI 2013
CountrySlovakia
CityHerl'any
Period1/31/132/2/13

Fingerprint

Derivatives
Sampling
Chemical reactions
Lyapunov functions
Reaction kinetics
Engines

ASJC Scopus subject areas

  • Artificial Intelligence
  • Human-Computer Interaction
  • Information Systems

Cite this

Kosi, K., Dineva, A., & Tar, J. (2013). Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model. In SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings (pp. 65-70). [6480946] https://doi.org/10.1109/SAMI.2013.6480946

Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model. / Kosi, Krisztian; Dineva, Adrienn; Tar, J.

SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings. 2013. p. 65-70 6480946.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kosi, K, Dineva, A & Tar, J 2013, Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model. in SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings., 6480946, pp. 65-70, 2013 IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, SAMI 2013, Herl'any, Slovakia, 1/31/13. https://doi.org/10.1109/SAMI.2013.6480946
Kosi K, Dineva A, Tar J. Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model. In SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings. 2013. p. 65-70. 6480946 https://doi.org/10.1109/SAMI.2013.6480946
Kosi, Krisztian ; Dineva, Adrienn ; Tar, J. / Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model. SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings. 2013. pp. 65-70
@inproceedings{0814e43105cd419489b5e0dd1e4081d1,
title = "Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model",
abstract = "In the control of chemical reactions the goal is to stabilize the control and take care of the design that has to integrate engineering aspects, as restrictions concerning the control signals, and the phenomenological limits that are not necessarily expressed by the reaction kinetic equations (e.g. no negative concentrations can be physically interpreted, and the reactants at the side of ingress cannot be purely extracted from the stirring tank reactor). In this paper the Robust Fixed Point Transformation (RFPT)-based adaptive approach was chosen for the control of an approximately modeled Brusselator reaction. The main reason of that was the fact that this methodology concentrates on the primary design goals as precise realization of the prescribed concentrations while the more conventional design methods that apply some Lyapunov function mainly concentrate on guaranteeing global stability without providing quasi-optimal solutions for the primary goals. Though the RFPT-based design has only local stability, its region of stability may be quite satisfactory for several practical applications. For controlling chemical reactions Continues Stirring Tank Reactors (CSTR) are widely used engines. The Busselator model will be represented in a CSTR in the simulations. In the present example two different reactants can be injected into the tank and the mixture is taken out in a single outlet. The necessary sampling frequency is a practically important design factor. It is shown that by the use of fractional order derivatives in the prescribed error relaxation considerably increases the necessary sampling time so it decreases the sampling frequency. This statement is substantiated by simulation results.",
author = "Krisztian Kosi and Adrienn Dineva and J. Tar",
year = "2013",
doi = "10.1109/SAMI.2013.6480946",
language = "English",
isbn = "9781467359290",
pages = "65--70",
booktitle = "SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings",

}

TY - GEN

T1 - Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model

AU - Kosi, Krisztian

AU - Dineva, Adrienn

AU - Tar, J.

PY - 2013

Y1 - 2013

N2 - In the control of chemical reactions the goal is to stabilize the control and take care of the design that has to integrate engineering aspects, as restrictions concerning the control signals, and the phenomenological limits that are not necessarily expressed by the reaction kinetic equations (e.g. no negative concentrations can be physically interpreted, and the reactants at the side of ingress cannot be purely extracted from the stirring tank reactor). In this paper the Robust Fixed Point Transformation (RFPT)-based adaptive approach was chosen for the control of an approximately modeled Brusselator reaction. The main reason of that was the fact that this methodology concentrates on the primary design goals as precise realization of the prescribed concentrations while the more conventional design methods that apply some Lyapunov function mainly concentrate on guaranteeing global stability without providing quasi-optimal solutions for the primary goals. Though the RFPT-based design has only local stability, its region of stability may be quite satisfactory for several practical applications. For controlling chemical reactions Continues Stirring Tank Reactors (CSTR) are widely used engines. The Busselator model will be represented in a CSTR in the simulations. In the present example two different reactants can be injected into the tank and the mixture is taken out in a single outlet. The necessary sampling frequency is a practically important design factor. It is shown that by the use of fractional order derivatives in the prescribed error relaxation considerably increases the necessary sampling time so it decreases the sampling frequency. This statement is substantiated by simulation results.

AB - In the control of chemical reactions the goal is to stabilize the control and take care of the design that has to integrate engineering aspects, as restrictions concerning the control signals, and the phenomenological limits that are not necessarily expressed by the reaction kinetic equations (e.g. no negative concentrations can be physically interpreted, and the reactants at the side of ingress cannot be purely extracted from the stirring tank reactor). In this paper the Robust Fixed Point Transformation (RFPT)-based adaptive approach was chosen for the control of an approximately modeled Brusselator reaction. The main reason of that was the fact that this methodology concentrates on the primary design goals as precise realization of the prescribed concentrations while the more conventional design methods that apply some Lyapunov function mainly concentrate on guaranteeing global stability without providing quasi-optimal solutions for the primary goals. Though the RFPT-based design has only local stability, its region of stability may be quite satisfactory for several practical applications. For controlling chemical reactions Continues Stirring Tank Reactors (CSTR) are widely used engines. The Busselator model will be represented in a CSTR in the simulations. In the present example two different reactants can be injected into the tank and the mixture is taken out in a single outlet. The necessary sampling frequency is a practically important design factor. It is shown that by the use of fractional order derivatives in the prescribed error relaxation considerably increases the necessary sampling time so it decreases the sampling frequency. This statement is substantiated by simulation results.

UR - http://www.scopus.com/inward/record.url?scp=84875633350&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84875633350&partnerID=8YFLogxK

U2 - 10.1109/SAMI.2013.6480946

DO - 10.1109/SAMI.2013.6480946

M3 - Conference contribution

AN - SCOPUS:84875633350

SN - 9781467359290

SP - 65

EP - 70

BT - SAMI 2013 - IEEE 11th International Symposium on Applied Machine Intelligence and Informatics, Proceedings

ER -