Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass

A. Révész, Ágnes Kis-Tóth, Péter Szommer, Tony Spassov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Melt-spun amorphous Mg65Ni20Cu5Y10 metallic glass compacts were subjected to severe shear deformation by high-pressure torsion. High-resolution X-ray diffraction analysis and scanning electron microscopy revealed that high-pressure torsion resulted in a deformation dependent microstructure. Nanoindentation measurements indicated that the heavy shear deformation yields an increase in hardness. High-pressure calorimetry measurements revealed that hydrogen uptake in the fully amorphous alloy occurs at a significantly lower temperature compared to the fully crystallized state, while the amount of absorbed hydrogen increased considerably after shear strain due to the formation of Mg2Ni crystals.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages74-79
Number of pages6
Volume729
DOIs
Publication statusPublished - 2013
Event8th Hungarian Conference on Materials Science - Balatonkenese, Hungary
Duration: Oct 9 2011Oct 11 2011

Publication series

NameMaterials Science Forum
Volume729
ISSN (Print)02555476

Other

Other8th Hungarian Conference on Materials Science
CountryHungary
CityBalatonkenese
Period10/9/1110/11/11

Fingerprint

Hydrogen storage
Metallic glass
metallic glasses
mechanical properties
Torsional stress
Mechanical properties
Shear deformation
microstructure
Microstructure
torsion
Hydrogen
hydrogen
shear
shear strain
Shear strain
Amorphous alloys
Calorimetry
Nanoindentation
nanoindentation
X ray diffraction analysis

Keywords

  • Amorphous alloy
  • H-storage
  • High-pressure torsion
  • Mg-based

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Révész, A., Kis-Tóth, Á., Szommer, P., & Spassov, T. (2013). Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass. In Materials Science Forum (Vol. 729, pp. 74-79). (Materials Science Forum; Vol. 729). https://doi.org/10.4028/www.scientific.net/MSF.729.74

Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass. / Révész, A.; Kis-Tóth, Ágnes; Szommer, Péter; Spassov, Tony.

Materials Science Forum. Vol. 729 2013. p. 74-79 (Materials Science Forum; Vol. 729).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Révész, A, Kis-Tóth, Á, Szommer, P & Spassov, T 2013, Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass. in Materials Science Forum. vol. 729, Materials Science Forum, vol. 729, pp. 74-79, 8th Hungarian Conference on Materials Science, Balatonkenese, Hungary, 10/9/11. https://doi.org/10.4028/www.scientific.net/MSF.729.74
Révész A, Kis-Tóth Á, Szommer P, Spassov T. Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass. In Materials Science Forum. Vol. 729. 2013. p. 74-79. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.729.74
Révész, A. ; Kis-Tóth, Ágnes ; Szommer, Péter ; Spassov, Tony. / Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass. Materials Science Forum. Vol. 729 2013. pp. 74-79 (Materials Science Forum).
@inproceedings{508cbcec47a54d6da6eb5a91c476596f,
title = "Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass",
abstract = "Melt-spun amorphous Mg65Ni20Cu5Y10 metallic glass compacts were subjected to severe shear deformation by high-pressure torsion. High-resolution X-ray diffraction analysis and scanning electron microscopy revealed that high-pressure torsion resulted in a deformation dependent microstructure. Nanoindentation measurements indicated that the heavy shear deformation yields an increase in hardness. High-pressure calorimetry measurements revealed that hydrogen uptake in the fully amorphous alloy occurs at a significantly lower temperature compared to the fully crystallized state, while the amount of absorbed hydrogen increased considerably after shear strain due to the formation of Mg2Ni crystals.",
keywords = "Amorphous alloy, H-storage, High-pressure torsion, Mg-based",
author = "A. R{\'e}v{\'e}sz and {\'A}gnes Kis-T{\'o}th and P{\'e}ter Szommer and Tony Spassov",
year = "2013",
doi = "10.4028/www.scientific.net/MSF.729.74",
language = "English",
isbn = "9783037854914",
volume = "729",
series = "Materials Science Forum",
pages = "74--79",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Hydrogen storage, microstructure and mechanical properties of strained mg65ni20cu5y10 metallic glass

AU - Révész, A.

AU - Kis-Tóth, Ágnes

AU - Szommer, Péter

AU - Spassov, Tony

PY - 2013

Y1 - 2013

N2 - Melt-spun amorphous Mg65Ni20Cu5Y10 metallic glass compacts were subjected to severe shear deformation by high-pressure torsion. High-resolution X-ray diffraction analysis and scanning electron microscopy revealed that high-pressure torsion resulted in a deformation dependent microstructure. Nanoindentation measurements indicated that the heavy shear deformation yields an increase in hardness. High-pressure calorimetry measurements revealed that hydrogen uptake in the fully amorphous alloy occurs at a significantly lower temperature compared to the fully crystallized state, while the amount of absorbed hydrogen increased considerably after shear strain due to the formation of Mg2Ni crystals.

AB - Melt-spun amorphous Mg65Ni20Cu5Y10 metallic glass compacts were subjected to severe shear deformation by high-pressure torsion. High-resolution X-ray diffraction analysis and scanning electron microscopy revealed that high-pressure torsion resulted in a deformation dependent microstructure. Nanoindentation measurements indicated that the heavy shear deformation yields an increase in hardness. High-pressure calorimetry measurements revealed that hydrogen uptake in the fully amorphous alloy occurs at a significantly lower temperature compared to the fully crystallized state, while the amount of absorbed hydrogen increased considerably after shear strain due to the formation of Mg2Ni crystals.

KW - Amorphous alloy

KW - H-storage

KW - High-pressure torsion

KW - Mg-based

UR - http://www.scopus.com/inward/record.url?scp=84870749068&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870749068&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.729.74

DO - 10.4028/www.scientific.net/MSF.729.74

M3 - Conference contribution

SN - 9783037854914

VL - 729

T3 - Materials Science Forum

SP - 74

EP - 79

BT - Materials Science Forum

ER -