Hybrid resins from polyisocyanate, vinyl ester, melamine formaldehyde and water glass: Structure and properties

J. Karger-Kocsis, N. Castellà, S. Grishchuk

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Hybrid thermosets were produced from polymeric methylene diphenyl isocyanate (PMDI), styrene cross-linkable vinyl ester (VE) and water glass (WG) using melamine formaldehyde (MF) resin as additional reactive emulsifier. Vinyl ester (VE) was added to the PMDI/MF mixture in which the WG was dispersed next. The content of MF in the resin formulation was varied between 0-5 and 15 wt-%. The resulting water in oil type (W/O) emulsion (water=WG, oil=organic phase composed of PMDI+VE+MF) was cured at room temperature for 24 h followed by post-curing at T=100°C for 4 h. The chemorheology of the hybrid resins was assessed by plate/plate rheometry. Information on the morphology of the cured hybrid resins was received from scanning electron microscope (SEM), atomic force microscopic (AFM) and dynamic mechanical thermal analysis (DMTA) studies. The mechanical and fracture mechanical properties as well as the resistance to thermal degradation of the hybrid thermosets were determined and discussed.

Original languageEnglish
Pages (from-to)204-209
Number of pages6
JournalPlastics, Rubber and Composites
Volume37
Issue number5-6
DOIs
Publication statusPublished - Jun 2008

Fingerprint

Melamine
Polyurethanes
Formaldehyde
Esters
Isocyanates
Resins
Glass
Water
Thermosets
Oils
Melamine formaldehyde resins
Styrene
Emulsions
Thermoanalysis
Curing
Pyrolysis
Electron microscopes
melamine formaldehyde
Scanning
Mechanical properties

Keywords

  • Fracture mechanics
  • Hybrid resins
  • Morphology
  • Polyisocyanate
  • Polyurea
  • Vinyl ester

ASJC Scopus subject areas

  • Ceramics and Composites
  • Polymers and Plastics
  • Materials Chemistry

Cite this

Hybrid resins from polyisocyanate, vinyl ester, melamine formaldehyde and water glass : Structure and properties. / Karger-Kocsis, J.; Castellà, N.; Grishchuk, S.

In: Plastics, Rubber and Composites, Vol. 37, No. 5-6, 06.2008, p. 204-209.

Research output: Contribution to journalArticle

@article{d94f2a84c4a64f01b7252838b0f03c96,
title = "Hybrid resins from polyisocyanate, vinyl ester, melamine formaldehyde and water glass: Structure and properties",
abstract = "Hybrid thermosets were produced from polymeric methylene diphenyl isocyanate (PMDI), styrene cross-linkable vinyl ester (VE) and water glass (WG) using melamine formaldehyde (MF) resin as additional reactive emulsifier. Vinyl ester (VE) was added to the PMDI/MF mixture in which the WG was dispersed next. The content of MF in the resin formulation was varied between 0-5 and 15 wt-{\%}. The resulting water in oil type (W/O) emulsion (water=WG, oil=organic phase composed of PMDI+VE+MF) was cured at room temperature for 24 h followed by post-curing at T=100°C for 4 h. The chemorheology of the hybrid resins was assessed by plate/plate rheometry. Information on the morphology of the cured hybrid resins was received from scanning electron microscope (SEM), atomic force microscopic (AFM) and dynamic mechanical thermal analysis (DMTA) studies. The mechanical and fracture mechanical properties as well as the resistance to thermal degradation of the hybrid thermosets were determined and discussed.",
keywords = "Fracture mechanics, Hybrid resins, Morphology, Polyisocyanate, Polyurea, Vinyl ester",
author = "J. Karger-Kocsis and N. Castell{\`a} and S. Grishchuk",
year = "2008",
month = "6",
doi = "10.1179/174328908X309349",
language = "English",
volume = "37",
pages = "204--209",
journal = "Plastics, Rubber and Composites",
issn = "1465-8011",
publisher = "Maney Publishing",
number = "5-6",

}

TY - JOUR

T1 - Hybrid resins from polyisocyanate, vinyl ester, melamine formaldehyde and water glass

T2 - Structure and properties

AU - Karger-Kocsis, J.

AU - Castellà, N.

AU - Grishchuk, S.

PY - 2008/6

Y1 - 2008/6

N2 - Hybrid thermosets were produced from polymeric methylene diphenyl isocyanate (PMDI), styrene cross-linkable vinyl ester (VE) and water glass (WG) using melamine formaldehyde (MF) resin as additional reactive emulsifier. Vinyl ester (VE) was added to the PMDI/MF mixture in which the WG was dispersed next. The content of MF in the resin formulation was varied between 0-5 and 15 wt-%. The resulting water in oil type (W/O) emulsion (water=WG, oil=organic phase composed of PMDI+VE+MF) was cured at room temperature for 24 h followed by post-curing at T=100°C for 4 h. The chemorheology of the hybrid resins was assessed by plate/plate rheometry. Information on the morphology of the cured hybrid resins was received from scanning electron microscope (SEM), atomic force microscopic (AFM) and dynamic mechanical thermal analysis (DMTA) studies. The mechanical and fracture mechanical properties as well as the resistance to thermal degradation of the hybrid thermosets were determined and discussed.

AB - Hybrid thermosets were produced from polymeric methylene diphenyl isocyanate (PMDI), styrene cross-linkable vinyl ester (VE) and water glass (WG) using melamine formaldehyde (MF) resin as additional reactive emulsifier. Vinyl ester (VE) was added to the PMDI/MF mixture in which the WG was dispersed next. The content of MF in the resin formulation was varied between 0-5 and 15 wt-%. The resulting water in oil type (W/O) emulsion (water=WG, oil=organic phase composed of PMDI+VE+MF) was cured at room temperature for 24 h followed by post-curing at T=100°C for 4 h. The chemorheology of the hybrid resins was assessed by plate/plate rheometry. Information on the morphology of the cured hybrid resins was received from scanning electron microscope (SEM), atomic force microscopic (AFM) and dynamic mechanical thermal analysis (DMTA) studies. The mechanical and fracture mechanical properties as well as the resistance to thermal degradation of the hybrid thermosets were determined and discussed.

KW - Fracture mechanics

KW - Hybrid resins

KW - Morphology

KW - Polyisocyanate

KW - Polyurea

KW - Vinyl ester

UR - http://www.scopus.com/inward/record.url?scp=51149087271&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=51149087271&partnerID=8YFLogxK

U2 - 10.1179/174328908X309349

DO - 10.1179/174328908X309349

M3 - Article

AN - SCOPUS:51149087271

VL - 37

SP - 204

EP - 209

JO - Plastics, Rubber and Composites

JF - Plastics, Rubber and Composites

SN - 1465-8011

IS - 5-6

ER -