Finite element analysis of the lower jaw implant in different resection scenarios

János Simonovics, K. Váradi

Research output: Contribution to journalArticle

Abstract

The goal of the research is to examine the different reconstruction solutions, which are used for the often-occurring jaw cancer resection and finding those areas that show higher potential risks of implant fracture. Within the research some finite element analysis based on data provided by Computer tomography have been concluded. The model in practice is built up with the most frequently used reconstruction plates and monocortical screws. Both lock and non-lock system solutions were examined. The results supporting the practice showed that indeed the maximal stress would rise in the implants closer to the resection in case of screws and in case of plates this will occur in the closer areas of resection within the thinner cross-sections.

Original languageEnglish
Pages (from-to)163-172
Number of pages10
JournalPollack Periodica
Volume8
Issue number2
DOIs
Publication statusPublished - Aug 1 2013

Fingerprint

Implant
Finite Element
Finite element method
Scenarios
Tomography
Cancer
Cross section
Model

Keywords

  • Computer tomography
  • Finite elements analysis
  • Implant
  • Mandible
  • Resection
  • Simulation

ASJC Scopus subject areas

  • Modelling and Simulation
  • Computer Science Applications
  • Civil and Structural Engineering
  • Materials Science(all)
  • Software

Cite this

Finite element analysis of the lower jaw implant in different resection scenarios. / Simonovics, János; Váradi, K.

In: Pollack Periodica, Vol. 8, No. 2, 01.08.2013, p. 163-172.

Research output: Contribution to journalArticle

@article{f949b1362f234af8adb7539da06710d2,
title = "Finite element analysis of the lower jaw implant in different resection scenarios",
abstract = "The goal of the research is to examine the different reconstruction solutions, which are used for the often-occurring jaw cancer resection and finding those areas that show higher potential risks of implant fracture. Within the research some finite element analysis based on data provided by Computer tomography have been concluded. The model in practice is built up with the most frequently used reconstruction plates and monocortical screws. Both lock and non-lock system solutions were examined. The results supporting the practice showed that indeed the maximal stress would rise in the implants closer to the resection in case of screws and in case of plates this will occur in the closer areas of resection within the thinner cross-sections.",
keywords = "Computer tomography, Finite elements analysis, Implant, Mandible, Resection, Simulation",
author = "J{\'a}nos Simonovics and K. V{\'a}radi",
year = "2013",
month = "8",
day = "1",
doi = "10.1556/Pollack.8.2013.2.17",
language = "English",
volume = "8",
pages = "163--172",
journal = "Pollack Periodica",
issn = "1788-1994",
publisher = "Akademiai Kiado",
number = "2",

}

TY - JOUR

T1 - Finite element analysis of the lower jaw implant in different resection scenarios

AU - Simonovics, János

AU - Váradi, K.

PY - 2013/8/1

Y1 - 2013/8/1

N2 - The goal of the research is to examine the different reconstruction solutions, which are used for the often-occurring jaw cancer resection and finding those areas that show higher potential risks of implant fracture. Within the research some finite element analysis based on data provided by Computer tomography have been concluded. The model in practice is built up with the most frequently used reconstruction plates and monocortical screws. Both lock and non-lock system solutions were examined. The results supporting the practice showed that indeed the maximal stress would rise in the implants closer to the resection in case of screws and in case of plates this will occur in the closer areas of resection within the thinner cross-sections.

AB - The goal of the research is to examine the different reconstruction solutions, which are used for the often-occurring jaw cancer resection and finding those areas that show higher potential risks of implant fracture. Within the research some finite element analysis based on data provided by Computer tomography have been concluded. The model in practice is built up with the most frequently used reconstruction plates and monocortical screws. Both lock and non-lock system solutions were examined. The results supporting the practice showed that indeed the maximal stress would rise in the implants closer to the resection in case of screws and in case of plates this will occur in the closer areas of resection within the thinner cross-sections.

KW - Computer tomography

KW - Finite elements analysis

KW - Implant

KW - Mandible

KW - Resection

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=84880074444&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84880074444&partnerID=8YFLogxK

U2 - 10.1556/Pollack.8.2013.2.17

DO - 10.1556/Pollack.8.2013.2.17

M3 - Article

AN - SCOPUS:84880074444

VL - 8

SP - 163

EP - 172

JO - Pollack Periodica

JF - Pollack Periodica

SN - 1788-1994

IS - 2

ER -