Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design

Alexandra Szöllösi, P. Baranyi, P. Várlaki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

The paper shows an example when the tightening of the convex hull determined by the vertexes of the polytopic Tensor Product model representation of a given quasi Linear Parameter Varying state-space model leads to feasible Linear Matrix Inequality based control design. In addition the paper unveils that the relaxation of the Tensor Product model complexity interferes also with the Linear Matrix Inequality feasibility results. The example at hand consists of the complex Nonlinear Aeroelastic Test Apparatus model of the three degree of freedom aeroelastic wing section model including Stribeck friction. The relaxation and convex hull tightening is based on the concept of the Tensor Product model transformation.

Original languageEnglish
Title of host publicationINES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages175-180
Number of pages6
ISBN (Print)9781479946150
DOIs
Publication statusPublished - Sep 24 2014
Event18th IEEE International Conference on Intelligent Engineering Systems, INES 2014 - Tihany, Hungary
Duration: Jul 3 2014Jul 5 2014

Other

Other18th IEEE International Conference on Intelligent Engineering Systems, INES 2014
CountryHungary
CityTihany
Period7/3/147/5/14

Fingerprint

Product Model
Linear matrix inequalities
Control Design
Convex Hull
Tensor Product
Matrix Inequality
Linear Inequalities
Tensors
Model Complexity
Model Transformation
State-space Model
Friction
Degree of freedom
Model

ASJC Scopus subject areas

  • Software
  • Artificial Intelligence
  • Applied Mathematics
  • Theoretical Computer Science

Cite this

Szöllösi, A., Baranyi, P., & Várlaki, P. (2014). Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design. In INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings (pp. 175-180). [6909364] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INES.2014.6909364

Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design. / Szöllösi, Alexandra; Baranyi, P.; Várlaki, P.

INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. p. 175-180 6909364.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Szöllösi, A, Baranyi, P & Várlaki, P 2014, Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design. in INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings., 6909364, Institute of Electrical and Electronics Engineers Inc., pp. 175-180, 18th IEEE International Conference on Intelligent Engineering Systems, INES 2014, Tihany, Hungary, 7/3/14. https://doi.org/10.1109/INES.2014.6909364
Szöllösi A, Baranyi P, Várlaki P. Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design. In INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2014. p. 175-180. 6909364 https://doi.org/10.1109/INES.2014.6909364
Szöllösi, Alexandra ; Baranyi, P. ; Várlaki, P. / Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design. INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 175-180
@inproceedings{5125e86c8a8c442eb716dd2a2a06df4c,
title = "Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design",
abstract = "The paper shows an example when the tightening of the convex hull determined by the vertexes of the polytopic Tensor Product model representation of a given quasi Linear Parameter Varying state-space model leads to feasible Linear Matrix Inequality based control design. In addition the paper unveils that the relaxation of the Tensor Product model complexity interferes also with the Linear Matrix Inequality feasibility results. The example at hand consists of the complex Nonlinear Aeroelastic Test Apparatus model of the three degree of freedom aeroelastic wing section model including Stribeck friction. The relaxation and convex hull tightening is based on the concept of the Tensor Product model transformation.",
author = "Alexandra Sz{\"o}ll{\"o}si and P. Baranyi and P. V{\'a}rlaki",
year = "2014",
month = "9",
day = "24",
doi = "10.1109/INES.2014.6909364",
language = "English",
isbn = "9781479946150",
pages = "175--180",
booktitle = "INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Example for convex hull tightening increasing the feasible parameter region at Linear Matrix Inequality based control design

AU - Szöllösi, Alexandra

AU - Baranyi, P.

AU - Várlaki, P.

PY - 2014/9/24

Y1 - 2014/9/24

N2 - The paper shows an example when the tightening of the convex hull determined by the vertexes of the polytopic Tensor Product model representation of a given quasi Linear Parameter Varying state-space model leads to feasible Linear Matrix Inequality based control design. In addition the paper unveils that the relaxation of the Tensor Product model complexity interferes also with the Linear Matrix Inequality feasibility results. The example at hand consists of the complex Nonlinear Aeroelastic Test Apparatus model of the three degree of freedom aeroelastic wing section model including Stribeck friction. The relaxation and convex hull tightening is based on the concept of the Tensor Product model transformation.

AB - The paper shows an example when the tightening of the convex hull determined by the vertexes of the polytopic Tensor Product model representation of a given quasi Linear Parameter Varying state-space model leads to feasible Linear Matrix Inequality based control design. In addition the paper unveils that the relaxation of the Tensor Product model complexity interferes also with the Linear Matrix Inequality feasibility results. The example at hand consists of the complex Nonlinear Aeroelastic Test Apparatus model of the three degree of freedom aeroelastic wing section model including Stribeck friction. The relaxation and convex hull tightening is based on the concept of the Tensor Product model transformation.

UR - http://www.scopus.com/inward/record.url?scp=84908635500&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84908635500&partnerID=8YFLogxK

U2 - 10.1109/INES.2014.6909364

DO - 10.1109/INES.2014.6909364

M3 - Conference contribution

SN - 9781479946150

SP - 175

EP - 180

BT - INES 2014 - IEEE 18th International Conference on Intelligent Engineering Systems, Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -