Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles

Jesper Ederth, Annette Hultåker, P. Heszler, Gunnar A. Niklasson, Claes G. Granqvist, Arie Van Doorn, Chris Van Haag, Michel J. Jongerius, Detlef Burgard

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

Thin films were made by spinning a dispersion of tin-doped indium-oxide particles, having an average diameter of 14 nm, onto glass substrates. As-deposited thin films displayed a resistivity ρ of 0.3 Ω m and some optical absorption. Annealing in vacuum at 200 to 400 °C for 2 h, and subsequently in air at 500 °C for 2 h, produced films with ρ ≈ 10-3 Ω m and a visible transmittance exceeding 90 %. Leaving out the vacuum treatment yielded higher resistivity.

Original languageEnglish
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
EditorsL.B. Kish, E.C. Harvey, W.B. Spillman, Jr.
Pages280-285
Number of pages6
Volume4590
DOIs
Publication statusPublished - 2001
EventBioMEMS and Smart Nanostructures - Adelaide, Australia
Duration: Dec 17 2001Dec 19 2001

Other

OtherBioMEMS and Smart Nanostructures
CountryAustralia
CityAdelaide
Period12/17/0112/19/01

Fingerprint

Spin coating
indium oxides
Indium
Tin
coating
tin
Metal spinning
Electric properties
Optical properties
electrical properties
Vacuum
optical properties
Thin films
vacuum
electrical resistivity
Oxides
thin films
Light absorption
metal spinning
transmittance

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Ederth, J., Hultåker, A., Heszler, P., Niklasson, G. A., Granqvist, C. G., Van Doorn, A., ... Burgard, D. (2001). Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles. In L. B. Kish, E. C. Harvey, & W. B. Spillman, Jr. (Eds.), Proceedings of SPIE - The International Society for Optical Engineering (Vol. 4590, pp. 280-285) https://doi.org/10.1117/12.454615

Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles. / Ederth, Jesper; Hultåker, Annette; Heszler, P.; Niklasson, Gunnar A.; Granqvist, Claes G.; Van Doorn, Arie; Van Haag, Chris; Jongerius, Michel J.; Burgard, Detlef.

Proceedings of SPIE - The International Society for Optical Engineering. ed. / L.B. Kish; E.C. Harvey; W.B. Spillman, Jr. Vol. 4590 2001. p. 280-285.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ederth, J, Hultåker, A, Heszler, P, Niklasson, GA, Granqvist, CG, Van Doorn, A, Van Haag, C, Jongerius, MJ & Burgard, D 2001, Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles. in LB Kish, EC Harvey & WB Spillman, Jr. (eds), Proceedings of SPIE - The International Society for Optical Engineering. vol. 4590, pp. 280-285, BioMEMS and Smart Nanostructures, Adelaide, Australia, 12/17/01. https://doi.org/10.1117/12.454615
Ederth J, Hultåker A, Heszler P, Niklasson GA, Granqvist CG, Van Doorn A et al. Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles. In Kish LB, Harvey EC, Spillman, Jr. WB, editors, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 4590. 2001. p. 280-285 https://doi.org/10.1117/12.454615
Ederth, Jesper ; Hultåker, Annette ; Heszler, P. ; Niklasson, Gunnar A. ; Granqvist, Claes G. ; Van Doorn, Arie ; Van Haag, Chris ; Jongerius, Michel J. ; Burgard, Detlef. / Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles. Proceedings of SPIE - The International Society for Optical Engineering. editor / L.B. Kish ; E.C. Harvey ; W.B. Spillman, Jr. Vol. 4590 2001. pp. 280-285
@inproceedings{83fc0b8db4df4b6a9c4472877b9013f0,
title = "Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles",
abstract = "Thin films were made by spinning a dispersion of tin-doped indium-oxide particles, having an average diameter of 14 nm, onto glass substrates. As-deposited thin films displayed a resistivity ρ of 0.3 Ω m and some optical absorption. Annealing in vacuum at 200 to 400 °C for 2 h, and subsequently in air at 500 °C for 2 h, produced films with ρ ≈ 10-3 Ω m and a visible transmittance exceeding 90 {\%}. Leaving out the vacuum treatment yielded higher resistivity.",
author = "Jesper Ederth and Annette Hult{\aa}ker and P. Heszler and Niklasson, {Gunnar A.} and Granqvist, {Claes G.} and {Van Doorn}, Arie and {Van Haag}, Chris and Jongerius, {Michel J.} and Detlef Burgard",
year = "2001",
doi = "10.1117/12.454615",
language = "English",
volume = "4590",
pages = "280--285",
editor = "L.B. Kish and E.C. Harvey and {Spillman, Jr.}, W.B.",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Electrical and optical properties of thin films prepared by spin-coating a dispersion of nano-sized tin-doped indium-oxide particles

AU - Ederth, Jesper

AU - Hultåker, Annette

AU - Heszler, P.

AU - Niklasson, Gunnar A.

AU - Granqvist, Claes G.

AU - Van Doorn, Arie

AU - Van Haag, Chris

AU - Jongerius, Michel J.

AU - Burgard, Detlef

PY - 2001

Y1 - 2001

N2 - Thin films were made by spinning a dispersion of tin-doped indium-oxide particles, having an average diameter of 14 nm, onto glass substrates. As-deposited thin films displayed a resistivity ρ of 0.3 Ω m and some optical absorption. Annealing in vacuum at 200 to 400 °C for 2 h, and subsequently in air at 500 °C for 2 h, produced films with ρ ≈ 10-3 Ω m and a visible transmittance exceeding 90 %. Leaving out the vacuum treatment yielded higher resistivity.

AB - Thin films were made by spinning a dispersion of tin-doped indium-oxide particles, having an average diameter of 14 nm, onto glass substrates. As-deposited thin films displayed a resistivity ρ of 0.3 Ω m and some optical absorption. Annealing in vacuum at 200 to 400 °C for 2 h, and subsequently in air at 500 °C for 2 h, produced films with ρ ≈ 10-3 Ω m and a visible transmittance exceeding 90 %. Leaving out the vacuum treatment yielded higher resistivity.

UR - http://www.scopus.com/inward/record.url?scp=0035768602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035768602&partnerID=8YFLogxK

U2 - 10.1117/12.454615

DO - 10.1117/12.454615

M3 - Conference contribution

AN - SCOPUS:0035768602

VL - 4590

SP - 280

EP - 285

BT - Proceedings of SPIE - The International Society for Optical Engineering

A2 - Kish, L.B.

A2 - Harvey, E.C.

A2 - Spillman, Jr., W.B.

ER -