Effects of the cooling rate on the acoustic properties of Pb-10Sn solder

Endre Harkai, Tamás Hurtony, P. Gordon

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Microhardness and sound velocity were measured in case of differently prepared solder samples. The used Pb-10Sn solder samples were melted then cooled down applying different cooling rates. These procedures caused variant microstructure thus different microhardness and sound velocity values. The sound velocity was measured by means of scanning acoustic microscopy. Characterization of solder materials by acoustic microscopy gives the possibility to non-destructively estimate mechanical and reliability parameters of the given material.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages356-360
Number of pages5
Volume729
DOIs
Publication statusPublished - 2013
Event8th Hungarian Conference on Materials Science - Balatonkenese, Hungary
Duration: Oct 9 2011Oct 11 2011

Publication series

NameMaterials Science Forum
Volume729
ISSN (Print)02555476

Other

Other8th Hungarian Conference on Materials Science
CountryHungary
CityBalatonkenese
Period10/9/1110/11/11

Fingerprint

Acoustic properties
acoustic properties
Acoustic wave velocity
solders
acoustic velocity
Soldering alloys
Cooling
cooling
Microhardness
microhardness
microscopy
acoustics
microstructure
Microstructure
scanning
estimates
Acoustic Microscopy

Keywords

  • Acoustic impedance
  • Microhardness
  • Scanning acoustic microscopy

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Harkai, E., Hurtony, T., & Gordon, P. (2013). Effects of the cooling rate on the acoustic properties of Pb-10Sn solder. In Materials Science Forum (Vol. 729, pp. 356-360). (Materials Science Forum; Vol. 729). https://doi.org/10.4028/www.scientific.net/MSF.729.356

Effects of the cooling rate on the acoustic properties of Pb-10Sn solder. / Harkai, Endre; Hurtony, Tamás; Gordon, P.

Materials Science Forum. Vol. 729 2013. p. 356-360 (Materials Science Forum; Vol. 729).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Harkai, E, Hurtony, T & Gordon, P 2013, Effects of the cooling rate on the acoustic properties of Pb-10Sn solder. in Materials Science Forum. vol. 729, Materials Science Forum, vol. 729, pp. 356-360, 8th Hungarian Conference on Materials Science, Balatonkenese, Hungary, 10/9/11. https://doi.org/10.4028/www.scientific.net/MSF.729.356
Harkai E, Hurtony T, Gordon P. Effects of the cooling rate on the acoustic properties of Pb-10Sn solder. In Materials Science Forum. Vol. 729. 2013. p. 356-360. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.729.356
Harkai, Endre ; Hurtony, Tamás ; Gordon, P. / Effects of the cooling rate on the acoustic properties of Pb-10Sn solder. Materials Science Forum. Vol. 729 2013. pp. 356-360 (Materials Science Forum).
@inproceedings{421094b2e14046558da992d9a9564bfe,
title = "Effects of the cooling rate on the acoustic properties of Pb-10Sn solder",
abstract = "Microhardness and sound velocity were measured in case of differently prepared solder samples. The used Pb-10Sn solder samples were melted then cooled down applying different cooling rates. These procedures caused variant microstructure thus different microhardness and sound velocity values. The sound velocity was measured by means of scanning acoustic microscopy. Characterization of solder materials by acoustic microscopy gives the possibility to non-destructively estimate mechanical and reliability parameters of the given material.",
keywords = "Acoustic impedance, Microhardness, Scanning acoustic microscopy",
author = "Endre Harkai and Tam{\'a}s Hurtony and P. Gordon",
year = "2013",
doi = "10.4028/www.scientific.net/MSF.729.356",
language = "English",
isbn = "9783037854914",
volume = "729",
series = "Materials Science Forum",
pages = "356--360",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Effects of the cooling rate on the acoustic properties of Pb-10Sn solder

AU - Harkai, Endre

AU - Hurtony, Tamás

AU - Gordon, P.

PY - 2013

Y1 - 2013

N2 - Microhardness and sound velocity were measured in case of differently prepared solder samples. The used Pb-10Sn solder samples were melted then cooled down applying different cooling rates. These procedures caused variant microstructure thus different microhardness and sound velocity values. The sound velocity was measured by means of scanning acoustic microscopy. Characterization of solder materials by acoustic microscopy gives the possibility to non-destructively estimate mechanical and reliability parameters of the given material.

AB - Microhardness and sound velocity were measured in case of differently prepared solder samples. The used Pb-10Sn solder samples were melted then cooled down applying different cooling rates. These procedures caused variant microstructure thus different microhardness and sound velocity values. The sound velocity was measured by means of scanning acoustic microscopy. Characterization of solder materials by acoustic microscopy gives the possibility to non-destructively estimate mechanical and reliability parameters of the given material.

KW - Acoustic impedance

KW - Microhardness

KW - Scanning acoustic microscopy

UR - http://www.scopus.com/inward/record.url?scp=84870767626&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870767626&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.729.356

DO - 10.4028/www.scientific.net/MSF.729.356

M3 - Conference contribution

AN - SCOPUS:84870767626

SN - 9783037854914

VL - 729

T3 - Materials Science Forum

SP - 356

EP - 360

BT - Materials Science Forum

ER -