Effect of temperature, shear and blending conditions on the relaxation properties of milled and compression molded plasticized PVC compounds

E. Földes, Péter Hedvig

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Blended, milled, and compression molded plasticized PVC compounds containing 30 wt percent of DIOP plasticizer were studied by combination of low effective frequency relaxation methods. The compounds were found to be heterogeneous and the ratio of plasticized and unplasticized phases dependent on the processing parameters. There is a correlation between the mechanical strength and the phase structure of the system.

Original languageEnglish
Pages (from-to)111-115
Number of pages5
JournalJournal of Vinyl and Additive Technology
Volume3
Issue number2
DOIs
Publication statusPublished - 1981

Fingerprint

Plasticizers
Phase structure
Polyvinyl Chloride
Polyvinyl chlorides
Strength of materials
Processing
Temperature
Compression

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Polymers and Plastics
  • Marketing
  • Materials Chemistry

Cite this

@article{cd59cb1361df42c68469d37ccdcbb775,
title = "Effect of temperature, shear and blending conditions on the relaxation properties of milled and compression molded plasticized PVC compounds",
abstract = "Blended, milled, and compression molded plasticized PVC compounds containing 30 wt percent of DIOP plasticizer were studied by combination of low effective frequency relaxation methods. The compounds were found to be heterogeneous and the ratio of plasticized and unplasticized phases dependent on the processing parameters. There is a correlation between the mechanical strength and the phase structure of the system.",
author = "E. F{\"o}ldes and P{\'e}ter Hedvig",
year = "1981",
doi = "10.1002/vnl.730030205",
language = "English",
volume = "3",
pages = "111--115",
journal = "Journal of Vinyl and Additive Technology",
issn = "1083-5601",
publisher = "John Wiley and Sons Ltd",
number = "2",

}

TY - JOUR

T1 - Effect of temperature, shear and blending conditions on the relaxation properties of milled and compression molded plasticized PVC compounds

AU - Földes, E.

AU - Hedvig, Péter

PY - 1981

Y1 - 1981

N2 - Blended, milled, and compression molded plasticized PVC compounds containing 30 wt percent of DIOP plasticizer were studied by combination of low effective frequency relaxation methods. The compounds were found to be heterogeneous and the ratio of plasticized and unplasticized phases dependent on the processing parameters. There is a correlation between the mechanical strength and the phase structure of the system.

AB - Blended, milled, and compression molded plasticized PVC compounds containing 30 wt percent of DIOP plasticizer were studied by combination of low effective frequency relaxation methods. The compounds were found to be heterogeneous and the ratio of plasticized and unplasticized phases dependent on the processing parameters. There is a correlation between the mechanical strength and the phase structure of the system.

UR - http://www.scopus.com/inward/record.url?scp=84981830062&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84981830062&partnerID=8YFLogxK

U2 - 10.1002/vnl.730030205

DO - 10.1002/vnl.730030205

M3 - Article

AN - SCOPUS:84981830062

VL - 3

SP - 111

EP - 115

JO - Journal of Vinyl and Additive Technology

JF - Journal of Vinyl and Additive Technology

SN - 1083-5601

IS - 2

ER -