Development of ceramic fiber reinforced polymer composites

T. Czigány, Z. A. Mohd Ishak

Research output: Contribution to journalArticle

Abstract

Short ceramic-fiber reinforced polypropylene composite was manufactured by different polymer-and textile technologies. It has been determined that the brittle ceramic fibers are too sensitive on different loads acting at manufacturing. Carding combined with needle-punching proved the best out of the investigated technologies, where matrix fibers as carrying fibers were applied. The reinforcing fiber-matrix adhesion has been improved by chemical curing. Characteristics of composites manufactured by different technologies have been determined by acoustic emission and fracture mechanical tests. The typical damage forms and fracture toughness of the materials were determined.

Original languageEnglish
Pages (from-to)141-144
Number of pages4
JournalVlakna a Textil
Volume8
Issue number2
Publication statusPublished - 2001

Fingerprint

Ceramic fibers
Polymers
Fibers
Composite materials
Punching
Polypropylenes
Acoustic emissions
Needles
Curing
Fracture toughness
Textiles
Adhesion
Fiber

ASJC Scopus subject areas

  • Business and International Management
  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Polymers and Plastics

Cite this

Development of ceramic fiber reinforced polymer composites. / Czigány, T.; Mohd Ishak, Z. A.

In: Vlakna a Textil, Vol. 8, No. 2, 2001, p. 141-144.

Research output: Contribution to journalArticle

Czigány, T & Mohd Ishak, ZA 2001, 'Development of ceramic fiber reinforced polymer composites', Vlakna a Textil, vol. 8, no. 2, pp. 141-144.
Czigány, T. ; Mohd Ishak, Z. A. / Development of ceramic fiber reinforced polymer composites. In: Vlakna a Textil. 2001 ; Vol. 8, No. 2. pp. 141-144.
@article{bf7a1780ca9b4a6e8ee2830eb6c2180a,
title = "Development of ceramic fiber reinforced polymer composites",
abstract = "Short ceramic-fiber reinforced polypropylene composite was manufactured by different polymer-and textile technologies. It has been determined that the brittle ceramic fibers are too sensitive on different loads acting at manufacturing. Carding combined with needle-punching proved the best out of the investigated technologies, where matrix fibers as carrying fibers were applied. The reinforcing fiber-matrix adhesion has been improved by chemical curing. Characteristics of composites manufactured by different technologies have been determined by acoustic emission and fracture mechanical tests. The typical damage forms and fracture toughness of the materials were determined.",
author = "T. Czig{\'a}ny and {Mohd Ishak}, {Z. A.}",
year = "2001",
language = "English",
volume = "8",
pages = "141--144",
journal = "Vlakna a Textil",
issn = "1335-0617",
publisher = "Slovak University of Technology in Bratislava",
number = "2",

}

TY - JOUR

T1 - Development of ceramic fiber reinforced polymer composites

AU - Czigány, T.

AU - Mohd Ishak, Z. A.

PY - 2001

Y1 - 2001

N2 - Short ceramic-fiber reinforced polypropylene composite was manufactured by different polymer-and textile technologies. It has been determined that the brittle ceramic fibers are too sensitive on different loads acting at manufacturing. Carding combined with needle-punching proved the best out of the investigated technologies, where matrix fibers as carrying fibers were applied. The reinforcing fiber-matrix adhesion has been improved by chemical curing. Characteristics of composites manufactured by different technologies have been determined by acoustic emission and fracture mechanical tests. The typical damage forms and fracture toughness of the materials were determined.

AB - Short ceramic-fiber reinforced polypropylene composite was manufactured by different polymer-and textile technologies. It has been determined that the brittle ceramic fibers are too sensitive on different loads acting at manufacturing. Carding combined with needle-punching proved the best out of the investigated technologies, where matrix fibers as carrying fibers were applied. The reinforcing fiber-matrix adhesion has been improved by chemical curing. Characteristics of composites manufactured by different technologies have been determined by acoustic emission and fracture mechanical tests. The typical damage forms and fracture toughness of the materials were determined.

UR - http://www.scopus.com/inward/record.url?scp=0034755419&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034755419&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0034755419

VL - 8

SP - 141

EP - 144

JO - Vlakna a Textil

JF - Vlakna a Textil

SN - 1335-0617

IS - 2

ER -