Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer

Bence Nemeth, Laszlo Hegely, P. Láng

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

The dehydration of isopropanol (B) by batch heteroazeotropic distillation (BHAD) is studied by dynamic simulation. The mixture also contains methyl ethyl ketone (A) and toluene (E) as pollutants. The water (C) content of the feed (ca. 2 mass%) is much lower than that of the B-C azeotrope. B can be obtained as residue by conventional batch distillation (BD) under a very high reflux ratio and considerable loss of B, only. The loss of B can be considerably decreased by BHAD. Toluene, already present in the mixture, can be a suitable entrainer (E), since it forms a ternary heteroazeotrope with isopropanol and water. Dehydration is feasible by Mode II, Strategy A of BHAD, that is, the two liquid phases of the condensate are separated in a decanter, and the whole amount of E-rich phase is refluxed, while that of E-lean phase is withdrawn as distillate. As the production is very slow because of the high (E-rich/E-lean) phase ratio, several operational strategies are studied in order to make it faster. These include taking a homogeneous fore-cut to remove methyl ethyl ketone, and Strategy B of Mode II, where part of the E-rich phase is also taken as distillate.

Original languageEnglish
Title of host publicationChemical Engineering Transactions
PublisherItalian Association of Chemical Engineering - AIDIC
Pages433-438
Number of pages6
Volume69
ISBN (Print)9788895608662
DOIs
Publication statusPublished - Jan 1 2018

Fingerprint

2-Propanol
Toluene
Dehydration
Distillation
Ketones
Azeotropes
Water
Computer simulation
Liquids
methylethyl ketone

ASJC Scopus subject areas

  • Chemical Engineering(all)

Cite this

Nemeth, B., Hegely, L., & Láng, P. (2018). Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer. In Chemical Engineering Transactions (Vol. 69, pp. 433-438). Italian Association of Chemical Engineering - AIDIC. https://doi.org/10.3303/CET1869073

Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer. / Nemeth, Bence; Hegely, Laszlo; Láng, P.

Chemical Engineering Transactions. Vol. 69 Italian Association of Chemical Engineering - AIDIC, 2018. p. 433-438.

Research output: Chapter in Book/Report/Conference proceedingChapter

Nemeth, B, Hegely, L & Láng, P 2018, Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer. in Chemical Engineering Transactions. vol. 69, Italian Association of Chemical Engineering - AIDIC, pp. 433-438. https://doi.org/10.3303/CET1869073
Nemeth B, Hegely L, Láng P. Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer. In Chemical Engineering Transactions. Vol. 69. Italian Association of Chemical Engineering - AIDIC. 2018. p. 433-438 https://doi.org/10.3303/CET1869073
Nemeth, Bence ; Hegely, Laszlo ; Láng, P. / Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer. Chemical Engineering Transactions. Vol. 69 Italian Association of Chemical Engineering - AIDIC, 2018. pp. 433-438
@inbook{049bec3534f64e1b8db122d26df12e47,
title = "Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer",
abstract = "The dehydration of isopropanol (B) by batch heteroazeotropic distillation (BHAD) is studied by dynamic simulation. The mixture also contains methyl ethyl ketone (A) and toluene (E) as pollutants. The water (C) content of the feed (ca. 2 mass{\%}) is much lower than that of the B-C azeotrope. B can be obtained as residue by conventional batch distillation (BD) under a very high reflux ratio and considerable loss of B, only. The loss of B can be considerably decreased by BHAD. Toluene, already present in the mixture, can be a suitable entrainer (E), since it forms a ternary heteroazeotrope with isopropanol and water. Dehydration is feasible by Mode II, Strategy A of BHAD, that is, the two liquid phases of the condensate are separated in a decanter, and the whole amount of E-rich phase is refluxed, while that of E-lean phase is withdrawn as distillate. As the production is very slow because of the high (E-rich/E-lean) phase ratio, several operational strategies are studied in order to make it faster. These include taking a homogeneous fore-cut to remove methyl ethyl ketone, and Strategy B of Mode II, where part of the E-rich phase is also taken as distillate.",
author = "Bence Nemeth and Laszlo Hegely and P. L{\'a}ng",
year = "2018",
month = "1",
day = "1",
doi = "10.3303/CET1869073",
language = "English",
isbn = "9788895608662",
volume = "69",
pages = "433--438",
booktitle = "Chemical Engineering Transactions",
publisher = "Italian Association of Chemical Engineering - AIDIC",

}

TY - CHAP

T1 - Dehydration of isopropanol by batch heteroazeotropic distillation with toluene as entrainer

AU - Nemeth, Bence

AU - Hegely, Laszlo

AU - Láng, P.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - The dehydration of isopropanol (B) by batch heteroazeotropic distillation (BHAD) is studied by dynamic simulation. The mixture also contains methyl ethyl ketone (A) and toluene (E) as pollutants. The water (C) content of the feed (ca. 2 mass%) is much lower than that of the B-C azeotrope. B can be obtained as residue by conventional batch distillation (BD) under a very high reflux ratio and considerable loss of B, only. The loss of B can be considerably decreased by BHAD. Toluene, already present in the mixture, can be a suitable entrainer (E), since it forms a ternary heteroazeotrope with isopropanol and water. Dehydration is feasible by Mode II, Strategy A of BHAD, that is, the two liquid phases of the condensate are separated in a decanter, and the whole amount of E-rich phase is refluxed, while that of E-lean phase is withdrawn as distillate. As the production is very slow because of the high (E-rich/E-lean) phase ratio, several operational strategies are studied in order to make it faster. These include taking a homogeneous fore-cut to remove methyl ethyl ketone, and Strategy B of Mode II, where part of the E-rich phase is also taken as distillate.

AB - The dehydration of isopropanol (B) by batch heteroazeotropic distillation (BHAD) is studied by dynamic simulation. The mixture also contains methyl ethyl ketone (A) and toluene (E) as pollutants. The water (C) content of the feed (ca. 2 mass%) is much lower than that of the B-C azeotrope. B can be obtained as residue by conventional batch distillation (BD) under a very high reflux ratio and considerable loss of B, only. The loss of B can be considerably decreased by BHAD. Toluene, already present in the mixture, can be a suitable entrainer (E), since it forms a ternary heteroazeotrope with isopropanol and water. Dehydration is feasible by Mode II, Strategy A of BHAD, that is, the two liquid phases of the condensate are separated in a decanter, and the whole amount of E-rich phase is refluxed, while that of E-lean phase is withdrawn as distillate. As the production is very slow because of the high (E-rich/E-lean) phase ratio, several operational strategies are studied in order to make it faster. These include taking a homogeneous fore-cut to remove methyl ethyl ketone, and Strategy B of Mode II, where part of the E-rich phase is also taken as distillate.

UR - http://www.scopus.com/inward/record.url?scp=85054631493&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85054631493&partnerID=8YFLogxK

U2 - 10.3303/CET1869073

DO - 10.3303/CET1869073

M3 - Chapter

SN - 9788895608662

VL - 69

SP - 433

EP - 438

BT - Chemical Engineering Transactions

PB - Italian Association of Chemical Engineering - AIDIC

ER -