Composite polymeric-inorganic waveguide fabricated by injection molding for biosensing applications

Fabian Dortu, Damien Bernier, Isabelle Cestier, Denis Vandormael, Carl Emmerechts, Lamia E. Fissi, Laurent Francis, Laurent Nittler, Laurent Houssiau, Balint Fodor, Emil Agocs, Peter Petrik, Miklos Fried

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Inorganic based optical transducers have demonstrated their suitability for labelled and label-free sensing of biomolecules but suffer from their relatively high cost. Photonic structures fabricated in polymer by molding techniques could drastically reduce the cost per test and pave the way for label-free screening in point-of care environment where the cost per test is an essential concern. In this paper we present the advances in the fabrication of waveguides with cyclo olefin copolymer (COC) cladding and TiO2 core with mass-production compatible injection molding and evaporation. We demonstrate the optical propagation in a slab waveguide supporting both transverse electric and magnetic modes and monitor the response of the phase difference between the two modes when a droplet of water is deposited on the chip.

Original languageEnglish
Title of host publicationICTON 2014 - 16th International Conference on Transparent Optical Networks
PublisherIEEE Computer Society
ISBN (Print)9781479956005
DOIs
Publication statusPublished - Jan 1 2014
Event16th International Conference on Transparent Optical Networks, ICTON 2014 - Graz, Austria
Duration: Jul 6 2014Jul 10 2014

Publication series

NameInternational Conference on Transparent Optical Networks
ISSN (Electronic)2162-7339

Other

Other16th International Conference on Transparent Optical Networks, ICTON 2014
CountryAustria
CityGraz
Period7/6/147/10/14

    Fingerprint

Keywords

  • Injection molding
  • Photonic sensor
  • Polymeric-inorganic composite
  • Slab waveguide

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

Dortu, F., Bernier, D., Cestier, I., Vandormael, D., Emmerechts, C., Fissi, L. E., Francis, L., Nittler, L., Houssiau, L., Fodor, B., Agocs, E., Petrik, P., & Fried, M. (2014). Composite polymeric-inorganic waveguide fabricated by injection molding for biosensing applications. In ICTON 2014 - 16th International Conference on Transparent Optical Networks [6876325] (International Conference on Transparent Optical Networks). IEEE Computer Society. https://doi.org/10.1109/ICTON.2014.6876325