Composite cylinders subjected to hygrothermal and mechanical loads

L. Kollar, Jocelyn M. Patterson, George S. Springer

Research output: Contribution to journalArticle

20 Citations (Scopus)

Abstract

The stress analysis of Kollár and Springer (1992) Int. J. Solids Structures 29. 1499-1517. is applied to fiber-reinforced organic matrix composite cylinders subjected to hygrolhermal and mechanical loads. The wall of the cylinder may be "thin" or "thick". An individual fiber must remain at the same radial distance from the axis; no other restrictions are placed either on fiber orientations or on stacking sequence. The applied loads may vary radially and circumferentially, but not axially. Solutions are presented which yield radially and circumfcrentially varying strains and stresses inside composite cylinders.

Original languageEnglish
Pages (from-to)1519-1534
Number of pages16
JournalInternational Journal of Solids and Structures
Volume29
Issue number12
DOIs
Publication statusPublished - 1992

Fingerprint

Loads (forces)
Composite
composite materials
Fibers
Composite materials
Fiber reinforced materials
Stress analysis
Fiber
fiber orientation
Fiber Orientation
fibers
stress analysis
Stress Analysis
Stacking
constrictions
Vary
Restriction
matrices

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Composite cylinders subjected to hygrothermal and mechanical loads. / Kollar, L.; Patterson, Jocelyn M.; Springer, George S.

In: International Journal of Solids and Structures, Vol. 29, No. 12, 1992, p. 1519-1534.

Research output: Contribution to journalArticle

Kollar, L. ; Patterson, Jocelyn M. ; Springer, George S. / Composite cylinders subjected to hygrothermal and mechanical loads. In: International Journal of Solids and Structures. 1992 ; Vol. 29, No. 12. pp. 1519-1534.
@article{2243336c718e4e0b9336328d9636c4b3,
title = "Composite cylinders subjected to hygrothermal and mechanical loads",
abstract = "The stress analysis of Koll{\'a}r and Springer (1992) Int. J. Solids Structures 29. 1499-1517. is applied to fiber-reinforced organic matrix composite cylinders subjected to hygrolhermal and mechanical loads. The wall of the cylinder may be {"}thin{"} or {"}thick{"}. An individual fiber must remain at the same radial distance from the axis; no other restrictions are placed either on fiber orientations or on stacking sequence. The applied loads may vary radially and circumferentially, but not axially. Solutions are presented which yield radially and circumfcrentially varying strains and stresses inside composite cylinders.",
author = "L. Kollar and Patterson, {Jocelyn M.} and Springer, {George S.}",
year = "1992",
doi = "10.1016/0020-7683(92)90131-C",
language = "English",
volume = "29",
pages = "1519--1534",
journal = "International Journal of Solids and Structures",
issn = "0020-7683",
publisher = "Elsevier Limited",
number = "12",

}

TY - JOUR

T1 - Composite cylinders subjected to hygrothermal and mechanical loads

AU - Kollar, L.

AU - Patterson, Jocelyn M.

AU - Springer, George S.

PY - 1992

Y1 - 1992

N2 - The stress analysis of Kollár and Springer (1992) Int. J. Solids Structures 29. 1499-1517. is applied to fiber-reinforced organic matrix composite cylinders subjected to hygrolhermal and mechanical loads. The wall of the cylinder may be "thin" or "thick". An individual fiber must remain at the same radial distance from the axis; no other restrictions are placed either on fiber orientations or on stacking sequence. The applied loads may vary radially and circumferentially, but not axially. Solutions are presented which yield radially and circumfcrentially varying strains and stresses inside composite cylinders.

AB - The stress analysis of Kollár and Springer (1992) Int. J. Solids Structures 29. 1499-1517. is applied to fiber-reinforced organic matrix composite cylinders subjected to hygrolhermal and mechanical loads. The wall of the cylinder may be "thin" or "thick". An individual fiber must remain at the same radial distance from the axis; no other restrictions are placed either on fiber orientations or on stacking sequence. The applied loads may vary radially and circumferentially, but not axially. Solutions are presented which yield radially and circumfcrentially varying strains and stresses inside composite cylinders.

UR - http://www.scopus.com/inward/record.url?scp=0026727508&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026727508&partnerID=8YFLogxK

U2 - 10.1016/0020-7683(92)90131-C

DO - 10.1016/0020-7683(92)90131-C

M3 - Article

AN - SCOPUS:0026727508

VL - 29

SP - 1519

EP - 1534

JO - International Journal of Solids and Structures

JF - International Journal of Solids and Structures

SN - 0020-7683

IS - 12

ER -