Comparison of flue gas desulphurization processes based on life cycle assessment

Tamás Benko, P. Mizsey

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

In this work, the environmental impact assessment is prepared for three different flue gas desulphurization (FGD) processes: (1) intra-furnace sulphur removal during coal combustion with limestone addition, (2) FGD with wet lime scrubbing, (3) regenerative copper oxide flue gas clean-up process. The evaluation and ranking of the three processes according to their environmental impacts is completed for the treatment of as much flue gas that contains 1 kg sulphur. The assessment of the environmental impacts is carried out with the Eco-indicator 99 life cycle impact assessment methodology based on life cycle inventories collected frome existing coal fuelled power plants. The environmental assessment is prepared for three different scenarios according to degree of the utilization of the by-products obtained during the desulphurization: (1) zero utilization, (2) full utilization, (3) utilization according to industrial statistics. The results show that all the three investigated FGD processes have about 80% lower environmental impact than the uncontrolled release of sulphur oxides into air. Intra-furnace limestone addition and wet scrubbing processes use similar principal of physical chemistry and they have similar environmental indices. The basis of the regenerative process is a sorption/reduction/oxidation cycle that has higher SO2 removal efficiency than the two other processes. This higher efficiency results in a significantly lower environmental impact.

Original languageEnglish
Pages (from-to)19-27
Number of pages9
JournalPeriodica Polytechnica: Chemical Engineering
Volume51
Issue number2
DOIs
Publication statusPublished - 2007

Fingerprint

Flue gases
Life cycle
Environmental impact
Calcium Carbonate
Limestone
Sulfur
Furnaces
Physical chemistry
Copper oxides
Coal
Coal combustion
Environmental impact assessments
Desulfurization
Lime
Oxides
Byproducts
Sorption
Power plants
Statistics
Oxidation

Keywords

  • Environmental performance
  • Flue gas desulphurization
  • Life cycle assessment

ASJC Scopus subject areas

  • Chemical Engineering(all)

Cite this

Comparison of flue gas desulphurization processes based on life cycle assessment. / Benko, Tamás; Mizsey, P.

In: Periodica Polytechnica: Chemical Engineering, Vol. 51, No. 2, 2007, p. 19-27.

Research output: Contribution to journalArticle

@article{5cca56a108314e2cbd7d497af856967d,
title = "Comparison of flue gas desulphurization processes based on life cycle assessment",
abstract = "In this work, the environmental impact assessment is prepared for three different flue gas desulphurization (FGD) processes: (1) intra-furnace sulphur removal during coal combustion with limestone addition, (2) FGD with wet lime scrubbing, (3) regenerative copper oxide flue gas clean-up process. The evaluation and ranking of the three processes according to their environmental impacts is completed for the treatment of as much flue gas that contains 1 kg sulphur. The assessment of the environmental impacts is carried out with the Eco-indicator 99 life cycle impact assessment methodology based on life cycle inventories collected frome existing coal fuelled power plants. The environmental assessment is prepared for three different scenarios according to degree of the utilization of the by-products obtained during the desulphurization: (1) zero utilization, (2) full utilization, (3) utilization according to industrial statistics. The results show that all the three investigated FGD processes have about 80{\%} lower environmental impact than the uncontrolled release of sulphur oxides into air. Intra-furnace limestone addition and wet scrubbing processes use similar principal of physical chemistry and they have similar environmental indices. The basis of the regenerative process is a sorption/reduction/oxidation cycle that has higher SO2 removal efficiency than the two other processes. This higher efficiency results in a significantly lower environmental impact.",
keywords = "Environmental performance, Flue gas desulphurization, Life cycle assessment",
author = "Tam{\'a}s Benko and P. Mizsey",
year = "2007",
doi = "10.3311/pp.ch.2007-2.04",
language = "English",
volume = "51",
pages = "19--27",
journal = "Periodica Polytechnica: Chemical Engineering",
issn = "0324-5853",
publisher = "Budapest University of Technology and Economics",
number = "2",

}

TY - JOUR

T1 - Comparison of flue gas desulphurization processes based on life cycle assessment

AU - Benko, Tamás

AU - Mizsey, P.

PY - 2007

Y1 - 2007

N2 - In this work, the environmental impact assessment is prepared for three different flue gas desulphurization (FGD) processes: (1) intra-furnace sulphur removal during coal combustion with limestone addition, (2) FGD with wet lime scrubbing, (3) regenerative copper oxide flue gas clean-up process. The evaluation and ranking of the three processes according to their environmental impacts is completed for the treatment of as much flue gas that contains 1 kg sulphur. The assessment of the environmental impacts is carried out with the Eco-indicator 99 life cycle impact assessment methodology based on life cycle inventories collected frome existing coal fuelled power plants. The environmental assessment is prepared for three different scenarios according to degree of the utilization of the by-products obtained during the desulphurization: (1) zero utilization, (2) full utilization, (3) utilization according to industrial statistics. The results show that all the three investigated FGD processes have about 80% lower environmental impact than the uncontrolled release of sulphur oxides into air. Intra-furnace limestone addition and wet scrubbing processes use similar principal of physical chemistry and they have similar environmental indices. The basis of the regenerative process is a sorption/reduction/oxidation cycle that has higher SO2 removal efficiency than the two other processes. This higher efficiency results in a significantly lower environmental impact.

AB - In this work, the environmental impact assessment is prepared for three different flue gas desulphurization (FGD) processes: (1) intra-furnace sulphur removal during coal combustion with limestone addition, (2) FGD with wet lime scrubbing, (3) regenerative copper oxide flue gas clean-up process. The evaluation and ranking of the three processes according to their environmental impacts is completed for the treatment of as much flue gas that contains 1 kg sulphur. The assessment of the environmental impacts is carried out with the Eco-indicator 99 life cycle impact assessment methodology based on life cycle inventories collected frome existing coal fuelled power plants. The environmental assessment is prepared for three different scenarios according to degree of the utilization of the by-products obtained during the desulphurization: (1) zero utilization, (2) full utilization, (3) utilization according to industrial statistics. The results show that all the three investigated FGD processes have about 80% lower environmental impact than the uncontrolled release of sulphur oxides into air. Intra-furnace limestone addition and wet scrubbing processes use similar principal of physical chemistry and they have similar environmental indices. The basis of the regenerative process is a sorption/reduction/oxidation cycle that has higher SO2 removal efficiency than the two other processes. This higher efficiency results in a significantly lower environmental impact.

KW - Environmental performance

KW - Flue gas desulphurization

KW - Life cycle assessment

UR - http://www.scopus.com/inward/record.url?scp=46149113257&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=46149113257&partnerID=8YFLogxK

U2 - 10.3311/pp.ch.2007-2.04

DO - 10.3311/pp.ch.2007-2.04

M3 - Article

AN - SCOPUS:46149113257

VL - 51

SP - 19

EP - 27

JO - Periodica Polytechnica: Chemical Engineering

JF - Periodica Polytechnica: Chemical Engineering

SN - 0324-5853

IS - 2

ER -