Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa

Translated title of the contribution: Comparative study of material removal in hard machining of bore holes

J. Kundrák, István Deszpoth, Viktor Molnár

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

In the technological planning of hard machining procedures, several factors of the component have to be considered. One factor is the system of geometrical dimensions of the components. The potential procedures capable of providing the required accuracy and quality specified to the surfaces, and/or their (economical) efficiency can also be influenced by the geometrical dimensions. Beyond the generally prevailing time study, in the present paper the material removal rate and the surface rate are investigated referring to hardened internal cylindrical surfaces. These parameters are referred to the unit operation time. The values of the parameters are analysed at different bore geometries. The investigations are performed for hard machining procedures with different inserts, as well as a combined hard machining and grinding procedure, and values are given with conventional (traverse) grinding as the basis of the comparison.

Original languageUndefined/Unknown
Pages (from-to)183-189
Number of pages7
JournalTehnicki Vjesnik
Volume21
Issue number1
Publication statusPublished - 2014

Fingerprint

Machining
Time and motion study
Planning
Geometry

Keywords

  • Hard machining
  • Operation time
  • Removal rate

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa. / Kundrák, J.; Deszpoth, István; Molnár, Viktor.

In: Tehnicki Vjesnik, Vol. 21, No. 1, 2014, p. 183-189.

Research output: Contribution to journalArticle

Kundrák, J. ; Deszpoth, István ; Molnár, Viktor. / Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa. In: Tehnicki Vjesnik. 2014 ; Vol. 21, No. 1. pp. 183-189.
@article{1d8bad6a5dda4bed941c43f9966595f5,
title = "Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa",
abstract = "In the technological planning of hard machining procedures, several factors of the component have to be considered. One factor is the system of geometrical dimensions of the components. The potential procedures capable of providing the required accuracy and quality specified to the surfaces, and/or their (economical) efficiency can also be influenced by the geometrical dimensions. Beyond the generally prevailing time study, in the present paper the material removal rate and the surface rate are investigated referring to hardened internal cylindrical surfaces. These parameters are referred to the unit operation time. The values of the parameters are analysed at different bore geometries. The investigations are performed for hard machining procedures with different inserts, as well as a combined hard machining and grinding procedure, and values are given with conventional (traverse) grinding as the basis of the comparison.",
keywords = "Hard machining, Operation time, Removal rate",
author = "J. Kundr{\'a}k and Istv{\'a}n Deszpoth and Viktor Moln{\'a}r",
year = "2014",
language = "Undefined/Unknown",
volume = "21",
pages = "183--189",
journal = "Tehnicki Vjesnik",
issn = "1330-3651",
publisher = "Strojarski Facultet, Sveuciliste Josipa Jurja Strossmayera u Osijeki",
number = "1",

}

TY - JOUR

T1 - Komparativna studija skidanja materijala u strojnoj obradi tvrdih površina provrtanih rupa

AU - Kundrák, J.

AU - Deszpoth, István

AU - Molnár, Viktor

PY - 2014

Y1 - 2014

N2 - In the technological planning of hard machining procedures, several factors of the component have to be considered. One factor is the system of geometrical dimensions of the components. The potential procedures capable of providing the required accuracy and quality specified to the surfaces, and/or their (economical) efficiency can also be influenced by the geometrical dimensions. Beyond the generally prevailing time study, in the present paper the material removal rate and the surface rate are investigated referring to hardened internal cylindrical surfaces. These parameters are referred to the unit operation time. The values of the parameters are analysed at different bore geometries. The investigations are performed for hard machining procedures with different inserts, as well as a combined hard machining and grinding procedure, and values are given with conventional (traverse) grinding as the basis of the comparison.

AB - In the technological planning of hard machining procedures, several factors of the component have to be considered. One factor is the system of geometrical dimensions of the components. The potential procedures capable of providing the required accuracy and quality specified to the surfaces, and/or their (economical) efficiency can also be influenced by the geometrical dimensions. Beyond the generally prevailing time study, in the present paper the material removal rate and the surface rate are investigated referring to hardened internal cylindrical surfaces. These parameters are referred to the unit operation time. The values of the parameters are analysed at different bore geometries. The investigations are performed for hard machining procedures with different inserts, as well as a combined hard machining and grinding procedure, and values are given with conventional (traverse) grinding as the basis of the comparison.

KW - Hard machining

KW - Operation time

KW - Removal rate

UR - http://www.scopus.com/inward/record.url?scp=84894504084&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894504084&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84894504084

VL - 21

SP - 183

EP - 189

JO - Tehnicki Vjesnik

JF - Tehnicki Vjesnik

SN - 1330-3651

IS - 1

ER -