Combined photovoltaic / thermal energy system for stand-alone operation

Rafael K. Jardan, I. Nagy, Angel Cid-Pastor, Ramon Leyva, Abdelali El Aroudi, Luis Martinez-Salamero

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

The utilization of solar energy can be made by photovoltaic (PV) cells to generate electric power directly and solar thermal (T) panels can be applied to generate heat power. When the utilization of the solar energy is necessary to generate electric power, the option of using T panels in combination with some heat/ electric power conversion technology can be a viable solution. The power generated by utilizing the solar energy absorbed by a given area of solar panel can be increased if the two technologies, PV and T cells, are combined in such a way that the resulting unit will be capable of co-generation of heat and electric power. In the present paper combined Photovoltaic / Thermal panels are suggested to generate heat power to produce hot water, while the photovoltaic part is used to obtain electric power mainly for covering the electric power consumption of the system, to supply the electronic control units and to operate pump drives etc. Ac and dc supplies are provided by converters for covering self-consumption and possibly the need of some household appliances. The development and design of the system is made by extensive use of modeling and simulation techniques. In the paper a part of the simulation studies, carried out to determine the energy balance in the electric energy conversion section of the system and the control structure, assuming stand-alone operation is presented.

Original languageEnglish
Title of host publicationIEEE International Symposium on Industrial Electronics
Pages2403-2408
Number of pages6
DOIs
Publication statusPublished - 2007
Event2007 IEEE International Symposium on Industrial Electronics, ISIE 2007 - Caixanova - Vigo, Spain
Duration: Jun 4 2007Jun 7 2007

Other

Other2007 IEEE International Symposium on Industrial Electronics, ISIE 2007
CountrySpain
CityCaixanova - Vigo
Period6/4/076/7/07

Fingerprint

Thermal energy
Solar energy
Photovoltaic cells
Domestic appliances
T-cells
Energy balance
Energy conversion
Hot Temperature
Electric power utilization
Pumps
Water

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Jardan, R. K., Nagy, I., Cid-Pastor, A., Leyva, R., El Aroudi, A., & Martinez-Salamero, L. (2007). Combined photovoltaic / thermal energy system for stand-alone operation. In IEEE International Symposium on Industrial Electronics (pp. 2403-2408). [4374983] https://doi.org/10.1109/ISIE.2007.4374983

Combined photovoltaic / thermal energy system for stand-alone operation. / Jardan, Rafael K.; Nagy, I.; Cid-Pastor, Angel; Leyva, Ramon; El Aroudi, Abdelali; Martinez-Salamero, Luis.

IEEE International Symposium on Industrial Electronics. 2007. p. 2403-2408 4374983.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jardan, RK, Nagy, I, Cid-Pastor, A, Leyva, R, El Aroudi, A & Martinez-Salamero, L 2007, Combined photovoltaic / thermal energy system for stand-alone operation. in IEEE International Symposium on Industrial Electronics., 4374983, pp. 2403-2408, 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Caixanova - Vigo, Spain, 6/4/07. https://doi.org/10.1109/ISIE.2007.4374983
Jardan RK, Nagy I, Cid-Pastor A, Leyva R, El Aroudi A, Martinez-Salamero L. Combined photovoltaic / thermal energy system for stand-alone operation. In IEEE International Symposium on Industrial Electronics. 2007. p. 2403-2408. 4374983 https://doi.org/10.1109/ISIE.2007.4374983
Jardan, Rafael K. ; Nagy, I. ; Cid-Pastor, Angel ; Leyva, Ramon ; El Aroudi, Abdelali ; Martinez-Salamero, Luis. / Combined photovoltaic / thermal energy system for stand-alone operation. IEEE International Symposium on Industrial Electronics. 2007. pp. 2403-2408
@inproceedings{7d1d6b1f2ea84eb585b43b9b544c7f51,
title = "Combined photovoltaic / thermal energy system for stand-alone operation",
abstract = "The utilization of solar energy can be made by photovoltaic (PV) cells to generate electric power directly and solar thermal (T) panels can be applied to generate heat power. When the utilization of the solar energy is necessary to generate electric power, the option of using T panels in combination with some heat/ electric power conversion technology can be a viable solution. The power generated by utilizing the solar energy absorbed by a given area of solar panel can be increased if the two technologies, PV and T cells, are combined in such a way that the resulting unit will be capable of co-generation of heat and electric power. In the present paper combined Photovoltaic / Thermal panels are suggested to generate heat power to produce hot water, while the photovoltaic part is used to obtain electric power mainly for covering the electric power consumption of the system, to supply the electronic control units and to operate pump drives etc. Ac and dc supplies are provided by converters for covering self-consumption and possibly the need of some household appliances. The development and design of the system is made by extensive use of modeling and simulation techniques. In the paper a part of the simulation studies, carried out to determine the energy balance in the electric energy conversion section of the system and the control structure, assuming stand-alone operation is presented.",
author = "Jardan, {Rafael K.} and I. Nagy and Angel Cid-Pastor and Ramon Leyva and {El Aroudi}, Abdelali and Luis Martinez-Salamero",
year = "2007",
doi = "10.1109/ISIE.2007.4374983",
language = "English",
isbn = "1424407559",
pages = "2403--2408",
booktitle = "IEEE International Symposium on Industrial Electronics",

}

TY - GEN

T1 - Combined photovoltaic / thermal energy system for stand-alone operation

AU - Jardan, Rafael K.

AU - Nagy, I.

AU - Cid-Pastor, Angel

AU - Leyva, Ramon

AU - El Aroudi, Abdelali

AU - Martinez-Salamero, Luis

PY - 2007

Y1 - 2007

N2 - The utilization of solar energy can be made by photovoltaic (PV) cells to generate electric power directly and solar thermal (T) panels can be applied to generate heat power. When the utilization of the solar energy is necessary to generate electric power, the option of using T panels in combination with some heat/ electric power conversion technology can be a viable solution. The power generated by utilizing the solar energy absorbed by a given area of solar panel can be increased if the two technologies, PV and T cells, are combined in such a way that the resulting unit will be capable of co-generation of heat and electric power. In the present paper combined Photovoltaic / Thermal panels are suggested to generate heat power to produce hot water, while the photovoltaic part is used to obtain electric power mainly for covering the electric power consumption of the system, to supply the electronic control units and to operate pump drives etc. Ac and dc supplies are provided by converters for covering self-consumption and possibly the need of some household appliances. The development and design of the system is made by extensive use of modeling and simulation techniques. In the paper a part of the simulation studies, carried out to determine the energy balance in the electric energy conversion section of the system and the control structure, assuming stand-alone operation is presented.

AB - The utilization of solar energy can be made by photovoltaic (PV) cells to generate electric power directly and solar thermal (T) panels can be applied to generate heat power. When the utilization of the solar energy is necessary to generate electric power, the option of using T panels in combination with some heat/ electric power conversion technology can be a viable solution. The power generated by utilizing the solar energy absorbed by a given area of solar panel can be increased if the two technologies, PV and T cells, are combined in such a way that the resulting unit will be capable of co-generation of heat and electric power. In the present paper combined Photovoltaic / Thermal panels are suggested to generate heat power to produce hot water, while the photovoltaic part is used to obtain electric power mainly for covering the electric power consumption of the system, to supply the electronic control units and to operate pump drives etc. Ac and dc supplies are provided by converters for covering self-consumption and possibly the need of some household appliances. The development and design of the system is made by extensive use of modeling and simulation techniques. In the paper a part of the simulation studies, carried out to determine the energy balance in the electric energy conversion section of the system and the control structure, assuming stand-alone operation is presented.

UR - http://www.scopus.com/inward/record.url?scp=50049131834&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50049131834&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2007.4374983

DO - 10.1109/ISIE.2007.4374983

M3 - Conference contribution

AN - SCOPUS:50049131834

SN - 1424407559

SN - 9781424407552

SP - 2403

EP - 2408

BT - IEEE International Symposium on Industrial Electronics

ER -